Matières premières
Price of liquid RTV-2 silicone rubber to make artificial stone molds |
Item No |
Hardness (shore A) |
Mixing ratio |
Viscosity |
Tensile- Strength (kgf/c㎡) |
Tear- Strength (kgf/c㎡) |
Elongation -break (%) |
Operation Time (mins) |
Curing Time (hrs) |
Shrinkage |
C-805 |
5 |
100: 2 |
3000±1000 |
18±5 |
10±2 |
300±50 |
20-30 |
2-3 |
≤0.3% |
C-810 |
10 |
100: 2 |
6000±1000 |
20±5 |
12±2 |
320±50 |
20-30 |
2-3 |
≤0.3% |
C-815 |
15 |
100: 2 |
14000±1000 |
25±5 |
18±2 |
350±50 |
20-30 |
2-3 |
≤0.3% |
C-820 |
20 |
100: 2 |
16000±1000 |
36±5 |
20±2 |
400±50 |
20-30 |
2-3 |
≤0.3% |
C-825 |
25 |
100: 2 |
20000±1000 |
40±5 |
22±2 |
450±50 |
20-30 |
2-3 |
≤0.3% |
C-830 |
30 |
100: 2 |
22000±1000 |
45±5 |
26±2 |
480±50 |
20-30 |
2-3 |
≤0.3% |
C-835 |
35 |
100: 2 |
23000±1000 |
50±5 |
23±2 |
460±50 |
20-30 |
2-3 |
≤0.3% |
C-840 |
40 |
100: 2 |
25000±1000 |
40±5 |
20±2 |
400±50 |
20-30 |
2-3 |
≤0.3% |
5. Using instructions of liquid RTV-2 silicone rubber to make artificial stone molds
Step 1: prepare the original molds
Prepare an perfect mold modle and clean it totally(the release agent can be detergent, soapy water and Vaseline)before operation .Take 100g silicone material and 2~5g curing agent strictly and mix them evenly.
*Notes: Make sure the toys and operation tool cleaned up totally to avoid uncure problem .
Step 2: Vacuum pumping
Without exception, this step takes less than 10 minutes.(normally is 5munites) Otherwise, it will cause cross linking reaction, and no more further steps will be available
Step 3: Pouring casting or Brushing operation
1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air . (mold with fine and precision patterns with low hardness.)
2.For delicate pattern products we suggest use brushing operation way.which can copy the pattern exactly .brushing way require high viscosity which won't be easy to flow away and easy to brush(large size molds with high hardness)
3.The amount of the curing agent can be adjusted according to the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.but we don't suggest to add silicone oil avoid oil problem.
Step 4: Demoulding:
After 35 hours later, can demould the silicone mold, it's will be better for molf to demould after 24 hours.
Notes: The curing temperature and curing time can be adjustable according to the operation conditions.
Package
25KG/drum vacuum packing for part A +1kg/ bottle catalyst for part B
200KG/drum packing for part A +1kg/ bottle catalyst for part B
Shelf life and transportation
1. Twelve(12) months when stored at 25℃ in tightly closed original packages.
2. The liquid silicone rubber is non- dangerous product (not inflammable and explosive), which could be transported as general chemicals.
Our Services
Factory price: best quality guaranteed.
Free sample for testing.
Superior service : we offer perfect both pre-sales and after-sales service.
Enough production capacity and timely delivery.
Strict QC control: 100% QC inspection for the products at least 3 times before shipping out.
OEM service: a range of designs available, clients' designs are welcome and will be treated confidentially.
Prompt shipment with professional documents.
Offering professional technical support.
FAQ
1. Why will the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which can destroy the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs or the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
2. Why does the silicone mold appear to dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.1% water into the silicon rubber and Stir over a low speed briefly when you use it.
3. Why is the silicon mold oily?
The molding silicone rubber itself doesn't contain any oil, so it won't be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de Price of liquid RTV-2 silicone rubber to make artificial stone molds Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : make, price, silicone, liquid, stone, rubber, artificial |
Dimanche 19 mai 2024
luminaires
Quantité : 14000 - Prix : 2,00 €
Profitez de notre offre spéciale destinée exclusivement aux clients B2B : un lot impressionnant de 14,000 luminaires, diversifiés en design et fonctionnalités, proposé au tarif exceptionnel de seulement 2€ par pièce. Détails de l'offre : - Quantité disponible : 14,000 pièces - Prix par unité : 2€ - Variété : Plusieurs modèles disponibles, adaptés à différents usages et préférences esthétiques. Produits disponibles : - Luminaires intérieurs modernes - Lampes de jardin et d'extérieur...
Vendredi 17 mai 2024
Quantité : 4000 - Prix : 5 à 10 % prix public
Bonjour, Nous sommes spécialisés dans le destockage de gros. Suite à la dissolution d'une société d'un distributeur, nous possédons en destockage un stock de 4000 pcs de cosmetiques pour le visage et le corps d'une marque de luxe aux états unis. Directement importée d'Israël Nous...
Mardi 16 juin 2015
Quantité : 10000m2/we - Prix : USD 80-90/m2
Air slide belt Airslide Belt (pneumatic conveyor belt) has fine breathability, it is used for pneumatic conveyors o f bulk materials. It is an indis pensable part of cement industry, aluminium, lime and gypsum indust ry, coal-fired power stations, transport of bulk goods, chemical industry ...