Automaitc Coil Winding Machine
0736
Donnez votre avis
Lire les avis
Ajouter au pense-bête
Imprimer
  • 3.3/5
  • 1
  • 2
  • 3
  • 4
  • 5
Détails
Chine (Rép. pop) Biens d'équipement

Signalez un abus

Biens d'équipement

Automaitc Coil Winding Machine

What are the most common problems with automatic coil winding machine and what are the using techniques?

There are four common problems with the coil winding machine: flatness -- winding number -- polarity ---- wounding coil

1. The factors affecting the flatness:


1). Equipment problems:

A. The machine runs unstably, shake and swing. -- Please repair and maintain the machine.

B. The winding axis centration is different from that of the main axis, and it swings when rotating. -- The installation work is unreasonable and the shaft is not completed.

C. The outlet is too big, and the coil can swing freely in a wide range. -- The outlet is not suitable.

D. The size of the spool is not matched with the hole in the rubber shell. -- The tool does not match the material.

2). Setting and adjusting problems:

A. The starting point: set it in accordance with the position of the rubber shell on the spool. And adjust slightly in the real work in accordance with the testing effect.

B. Width: set it in accordance with the winding groove width of the rubber shell. And adjust slightly in the real work in accordance with the testing effect.

C. Coil diameter: the rough coil diameter is the total width of a certain section divided by the total winding number.

D. Tension: the dynamic tension of the coil winding should be moderate. It will affect the coil overall uniformity if the tension is too large or too small.

E. The outlet is too far away from the rubber shell. The coil free swing range becomes large because of inertia, the control of the coil is weakened. The distance between the outlet and the rubber shell should be treated differently: the coil will be more orderly when the coil diameter is larger.

F. The coil frame is loose, and it wobbles with the wiggle of the coil.

3). Use problem: the rubber shell is not inserted in position or moved when winding.

2. The factors influencing winding number:


1). Machine settings: be more careful when a winding is completed in multiple segments; There may also be an impact on a slow machine without stopping.

Localisation : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Personne à contacter : Lee Salome, 0086 0512 57169166

easysight

  • 3.5/5
Détail
Inscrit le 17 avril 2018

Site web : www.bojin.hk/

Envoyer un email à easysight

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Automaitc Coil Winding Machine

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
winding, machine, coil, automaitc
  • 3.7/5
  • 1
  • 2
  • 3
  • 4
  • 5
Turquie 42050 Alimentaire

Signalez un abus

photo non disponible
Chaudières, MACHINE DE CHOCOLAT, DOUX

Thursday 20 June 2013

Quantité : 1 - Prix : 10000 USD

Chaudière en acier inoxydable ET EQUIPEMENTS NOS ZONES DE PRODUCTION INDUSTRIE ALIMENTAIRE • bonbons durs et mous LIGNES DE PRODUCTION • CHOCOLAT LIGNES DE PRODUCTION • HALVA, confiture, miel, RAISIN LIGNES DE PRODUCTION la mélasse • TAHINI, graines de sésame USINES...

TURKON EXPORT LTD.

  • 42050 - KONYA
  • +905353265862
  • 3.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Hong Kong 230011 Matériels occasions

Signalez un abus

Ndfeb magnet
Ndfeb magnet

Friday 25 October 2013

Quantité : 1000 piece - Prix : USD 0.1 / piece

- Materials: neodymium, iron, boron - Magnetic properties: high coercive force, the maximum operation temperature is up to 200°C - Grades: N33-N52, 33M-48M, 33H-48H, 30SH-45SH, 30UH-38UH and 30EH-38EH - Shapes and sizes: can be customized - Coatings: Ni, Zn, gold, copper...

Anhui Astromagnet Co., Ltd

  • 230011 - Hefei ,Anhui
  • 86 0551 63757870
  • 3.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Espagne 28492 Bâtiment

Signalez un abus

photo non disponible
Machine pour la fabrication des blocs de construction , blocs trottoirs , carrelage trottoirs,

Monday 20 August 2012

Quantité : une machin - Prix : 30000euros

Localisation : Calle Prado Isidro 45 , 28492 Mataelpino Madrid, Personne à contacter : Allami Azizi cherifa, 639509955

autonomo

  • 28492 - Mataelpino Madrid
  • 639509955