Biens d'équipement
Ball Mill
|
Model |
Shell rotation speed (r/min) |
Ball load (t) |
Feeding size (mm) |
Discharging size (mm) |
Capacity(t/h) |
Motor power (kw) |
Total weight (t) |
Ф900×1800 |
36-38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
5.85 |
Ф900×3000 |
36 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
6.98 |
Ф1200×2400 |
36 |
3 |
≤25 |
0.075-0.6 |
1.5-4.8 |
30 |
13.6 |
Ф1200×3000 |
36 |
3.5 |
≤25 |
0.074-0.4 |
1.6-5 |
37 |
14.3 |
Ф1200×4500 |
32.4 |
5 |
≤25 |
0.074-0.4 |
1.6-5.8 |
55 |
15.6 |
Ф1500×3000 |
29.7 |
7.5 |
≤25 |
0.074-0.4 |
2-5 |
75 |
19.5 |
Ф1500×4500 |
27 |
11 |
≤25 |
0.074-0.4 |
3-6 |
110 |
22 |
Ф1500×5700 |
28 |
12 |
≤25 |
0.074-0.4 |
3.5-6 |
130 |
25.8 |
Ф1830×3000 |
25.4 |
11 |
≤25 |
0.074-0.4 |
4-10 |
130 |
34.5 |
Ф1830×4500 |
25.4 |
15 |
≤25 |
0.074-0.4 |
4.5-12 |
155 |
38 |
Ф1830×6400 |
24.1 |
21 |
≤25 |
0.074-0.4 |
6.5-15 |
210 |
43 |
Ф1830×7000 |
24.1 |
23 |
≤25 |
0.074-0.4 |
7.5-17 |
245 |
43.8 |
Ф2100×3000 |
23.7 |
15 |
≤25 |
0.074-0.4 |
6.5-36 |
155 |
45 |
Ф2100×4500 |
23.7 |
24 |
≤25 |
0.074-0.4 |
8-43 |
245 |
56 |
Ф2100×7000 |
23.7 |
26 |
≤25 |
0.074-0.4 |
12-48 |
280 |
59.5 |
Ф2200×4500 |
21.5 |
27 |
≤25 |
0.074-0.4 |
9-45 |
280 |
54.5 |
Ф2200×6500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
14-26 |
380 |
61 |
Ф2200×7000 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-28 |
380 |
62.5 |
Ф2200×7500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-30 |
380 |
64.8 |
Ф2400×3000 |
21 |
23 |
≤25 |
0.074-0.4 |
7-50 |
245 |
58 |
Ф2400×4500 |
21 |
30 |
≤25 |
0.074-0.4 |
8.5-60 |
320 |
72 |
Ф2700×4000 |
20.7 |
40 |
≤25 |
0.074-0.4 |
22-80 |
380 |
95 |
Ф2700×4500 |
20.7 |
48 |
≤25 |
0.074-0.4 |
26-90 |
480 |
102 |
Ф3200×4500 |
18 |
65 |
≤25 |
0.074-0.4 |
As per process conditions |
630 |
149 |
Ф3600×4500 |
17 |
90 |
≤25 |
0.074-0.4 |
As per process conditions |
850 |
169 |
Ф3600×6000 |
17 |
110 |
≤25 |
0.074-0.4 |
As per process conditions |
1250 |
198 |
Ф3600×8500 |
18 |
131 |
≤25 |
0.074-0.4 |
45.8-256 |
1800 |
260 |
Ф4000×5000 |
16.9 |
121 |
≤25 |
0.074-0.4 |
45-208 |
1500 |
230 |
Ф4000×6000 |
16.9 |
146 |
≤25 |
0.074-0.4 |
65-248 |
1600 |
242 |
Ф4000×6700 |
16.9 |
149 |
≤25 |
0.074-0.4 |
75-252 |
1800 |
249 |
Ф4500×6400 |
15.6 |
172 |
≤25 |
0.074-0.4 |
84-306 |
2000 |
280 |
Ф5030×6400 |
14.4 |
216 |
≤25 |
0.074-0.4 |
98-386 |
2500 |
320 |
Ф5030×8300 |
14.4 |
266 |
≤25 |
0.074-0.4 |
118-500 |
3300 |
403 |
Ф5500×8500 |
13.8 |
338 |
≤25 |
0.074-0.4 |
148-615 |
4500 |
525 |
Ball grinding mills are widely used in production industries, such as cement, silicate products, new building materials, refractory materials, chemical fertilizers, black and ferrous metals and glass ceramics and others. It can grand things in dry-type and wet-type for all kinds of ore and other grindable materials.
The Structure Characteristics of the Ball MillThe ball mill consists of feeding parts, discharging parts, rotary parts, transmission parts (reducer, small transmission gear, motor, electronic control) and other main parts. The hollow shaft adopts cast steel, and the inner lining of it can be dismantled. The rotary large gear is machined by casting hobbing process, with a wear-resistant lining plate in the barrel, which has the ability of wear resistance. Our machine runs smoothly and has reliable performance. According to the material and discharge way, we can choose dry-type ball mill or wet-type ball mill.
Quick-wear Parts of the Ball MillThe quick-wear parts of the ball mill mainly refer to the lining boards, the wear and usage time of the liner are related to the cost and production effect of the ball mill. Then how to identify the advantages and disadvantages of the lining boards. We can conclude it mainly from three steps, the first to see is the lining plate casting and smelting process, the next step is to check whether the lining plate quenching and tempering treatment are qualified, and at last, we need to look at the lining board material carefully. At present, the common lining materials in the market are high chromium cast iron, low alloy wear-resistant cast steel and high manganese steel material. These three kind of materials of lining boards of the three kinds of have good wear resistance ability. GUIKUANG machinery welcome you to our factory to inspect the production process of ball mills and the lining plate's manufacturing techniques.
The Operation Principle of the Ball MillThe material is entered into the hollow shaft by the feeding device, and then it enters the first warehouse of the ball mill evenly. There are stepped lining plates or corrugated lining plates with different sizes of steel balls inside the warehouse. The cylinder rotates to produce centrifugal force for bringing the steel ball to a certain height and then it falls down. This produces heavy blow and grinding effects to the material. After the rough grinding process, the material enters the second warehouse through a single clapboard. The warehouse is lined with a scale-board with steel balls for further grinding. The powder is discharged by the discharging grate plate to finish the grinding operation.
The Classifications of the Ball MillAccording to the different materials processed by the ball mill, GUIKUANG machinery produces the following kinds of ball mill, such as gold ball mill, black manganese ore ball mill, nickel ore ball mill, tin ore ball mill, copper ore ball mill, pomegranate ball mill, andalusite ball mill, aluminum grey ball mill, molybdenum ore ball mill, fluorite ball mill and so on.
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de Ball Mill Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : ball, mill |
Samedi 30 août 2014
Quantité : 10 - Prix : 13,00 €
Artikelmerkmale: - 100% brandneu und hochwertig - Geeignet für Samsung Galaxy S3 i9300 - Praktisch und bequem - Einfach einzusetzen - Starker Schutz vor Kratzern und Staub - Einfach zu reinigen - Fächer für Karten, Tickets, Geldschein - Mit Magnetverschluss - Stabile Ständerfunktion...
Lundi 06 mai 2013
Quantité : more than - Prix : 7-10 USD
Model number : DR 1332 Feature: Baby appliqué dress set, ruffle at pant Material: 100% cotton Fabric type: CR 10.0 Black Chevron 100% cotton, D58.0 - Orange with white dot, D48.1 - Yellow with white dot 100% cotton Supply type: OEM service Technic : appliqué Localisation : 35/2...
Lundi 05 mai 2014
Quantité : 1000 - Prix : 598,00 €
CRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Industrial steel cased, aircraft (aluminium cased) and partial, cracked or broken...