Principles for Selecting SPE Cartridges Specifications
0357
Donnez votre avis
Lire les avis
Ajouter au pense-bête
Imprimer
  • 3/5
  • 1
  • 2
  • 3
  • 4
  • 5
Détails
Chine (Rép. pop) Divers

Signalez un abus

Divers

Principles for Selecting SPE Cartridges Specifications

After selecting the type of SPE cartridges, we have to determine the specifications of the SPE cartridge.

The principle of selecting the SPE cartridge specification is to first ensure that the SPE cartridge packing has sufficient capacity to retain the target compound 100% on the column. On the other hand, the filler is not too much. The more filler, the greater the amount of solvent that is effective for the target compound to elute. Therefore, the SPE cartridge capacity must be considered when selecting the specifications for the SPE cartridge. Cartridge capacity refers to the mass of a compound that retains a compound with a primary force per unit mass. The capacity of the bonded silica cartridge is generally from 1% to 5%.

Take the SPE cartridges with 100 mg filler as an example. The maximum capacity is generally less than 5 mg. The cartridge capacity of the ion exchanger is about 0.5 to 1.5 meq/g. It is worth pointing out that because we are mostly a mixture, there are many interfering substances besides the target compound.

Therefore, when selecting the cartridge size, it is necessary to consider the target compound and the total amount of interference substances that may be adsorbed under the extraction conditions, and not only the target compound. Otherwise, even if the target compound does not exceed the cartridge capacity, the SPE cartridges retains some of the interfering substances while retaining the target compound.

Since the total amount of the two has exceeded the cartridge capacity, the result is that some of the target compounds cannot be retained. On the SPE cartridge. Therefore, for safety reasons, it is recommended that the cartridge capacity be better than twice the estimated target compound content.

Localisation : Xi'an City , Shaanxi Province, P.R.China, 710077 Xi'an,
Personne à contacter : Bruce Lu, +86 29 89284429

hawachsci

  • 3.4/5
Détail
Inscrit le 01 mars 2019

Numéro d'identification de la société : 91610000059692822B

Site web : www.hawach.com/

Envoyer un email à hawachsci

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Principles for Selecting SPE Cartridges Specifications

Rechercher dans la catégorie : Divers
Rechercher dans la catégorie :
cartridges, selecting, specifications, principles
  • 3.2/5
  • 1
  • 2
  • 3
  • 4
  • 5
Hong Kong 852 Biens d'équipement

Signalez un abus

IP Camera Module | TI solution 2.0megapixel 1080P DM365/DM368+Sony IMX222
IP Camera Module | TI solution 2.0megapixel 1080P DM365/DM368+Sony IMX222

Monday 07 September 2015

- Feature (click here for details) - - Under the LAN can support more than 10 simultaneous client connections cameras, image lag within 100 milliseconds, supports standard streaming media network protocols, network 8 M per channel bit rate case, no mosaic - The DSP processor...

ZT Technology Group Ltd.

  • ellazhan
  • 852 - Fo Tan
  • +85 2 26 75 75 58
  • 3.7/5
  • 1
  • 2
  • 3
  • 4
  • 5
Taiwan 334 Biens d'équipement

Signalez un abus

Automatic Gear Pump Liquid Filling Machine FP-465
Automatic Gear Pump Liquid Filling Machine FP-465

Tuesday 14 April 2026

Automatic Gear Pump Liquid Filling Machine FP-465 is designed and engineered to produce outstanding quality and precision filling suitable for various products like shampoo, hot sauce, lubricant oil etc. FP-465 can also replace piston or peristaltic module for the flexibility of filling demands...

Autopack Co.,Ltd

  • autopacker
  • 33454 - Taoyuan City
  • +88 6 33 68 98 06
  • 3.7/5
  • 1
  • 2
  • 3
  • 4
  • 5
Taiwan 24158 Biens d'équipement

Signalez un abus

CNC Dielectric Fluid EDM (Standard) Series S50,S60,S90
CNC Dielectric Fluid EDM (Standard) Series S50,S60,S90

Thursday 06 August 2015

Quantité : 30 sets

The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...

Sane Kuei Machinery Co., Ltd

  • Sane Kuei Machinery Co., Ltd
  • 24158 - New Taipei City
  • +886285112370