Cleaning Procedure And Precautions Of Bottle-Top Dispenser

HAWACH bottle-top dispenser
Take the bottle-top dispenser as an example. It features trouble-free and reliable liquid separation and wide range of fittings for most common bottle sizes. All models are equipped with anti-drip safety valves and fine adjustment mechanisms to ensure repeatability of multiple dispensing. Unlike other bottle-top dispensers, the glass tube of HAWACH can be removed from the base for thorough cleaning. This also ensures that in the rare case of damage, you can replace the glass tube with a spare part without having to buy a new dispenser. The dispensing head can be easily rotated to make the operator feel safe and comfortable. The optional spray head can be extended, even for thin tubes that can be quickly and safely dispensed.

Matters needing attention during bottle-top dispenser operation

1. When installing the drain tube and the inlet tube, insert the tube straight into the valve, tighten the nut to avoid violent installation and insert the tube into the tube.
2. Before each use, make sure that the inlet and outlet and all valves are properly installed and tightened to prevent splashing caused by the piston movement.
3. Avoid draining the pipe straight to the operator.
4. When draining, control the piston to move at a constant speed and use a suitable container to receive the liquid and let the liquid go down the bottle wall.
5. If you encounter any trouble during draining, please stop immediately and do not use the violent operations to avoid further damage to the instrument.
6. After use, please fasten the safety cap of the drain tube to prevent the liquid in the drain nozzle from dripping due to gravity or water vapor in the air.
7. After use, please rotate the scale adjustment ring to the “0” position to ensure safety.
8. Prohibited reagents: HF acid and bromine suspensions. (If used, a special bottle dispenser is required)

Clea ning Procedure And Precautions Of Bottle-Top Dispenser