TRANSPORTABLE CONTAINER BLAST ROOM

The movable sandblasting room or portable blast room, abrasive recovery system, dust collector, portable shot blasting machine together, it can be transported to the site by flatbed truck. The installation time is less than 2 hours, which is the best equipment for field-flow operation.

Transportable container portable shot blaster room features:

The whole blasting room adopts container installation, which can be transported from one place to another easily and convenient for sand blasting;

The portable sand blasting booth does not need foundation pit, can be placed on the ground directly, which reduces the investment cost of the equipment;

The transportable container blast room is suitable for a wide range of abrasive media including but not limited to: steel shot, steel grit, chilled iron, aluminium oxide, glass bead, etc.

The transportable container blast room can quickly change the type of abrasive, the abrasive can be quickly replaced according to the process requirements to realize the processing of workpieces with different materials.

The dust collector for sandblasting room adopts the filter cartridge type dust collector, which fully meets the environmental protection requirements.

Transportable container blast room fitted out with :

Main doors suitable interlocked – to prevent blasting with doors open.

Operator door – as a means of exit if main doors are stuck, also interlocked.

LED lighting.

Emergency lighting.

Steel floor with side shedders.

Cross screw conveyor at the bulkhead.

Air inlets providing ventilation for blast room and good operator visibility.

Shot-blast quality rubber lining of room.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

As the shot blasting machine manufacturer, QINGGONG MACHINERY mainly supplies four types of partial reclaim systems, including sweep-chute floor, single screw, H-shaped partial reclaim system, and U-shape partial reclaim system.

QINGGONG MACHINERY also offers a full spectrum of blast room reclaim floor designs and configurations. Our full floor reclaim system requires merely a shallow concrete foundation. The type of sandblasting room is carefully designed to lift working effiency.