Diamond Wire Drawing Die Blanks

Industrial diamond powders has the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has high hardness and good wear resistance, and can be widely used for cutting, grinding and drilling. Diamond abrasive powder has high thermal conductivity and good electrical insulation, can be used as a heat sink for semiconductor devices, has excellent light transmission and corrosion resistance, and is widely used in the electronics industry.

What is PCD wire drawing dies used for?

The diamond wire drawing dies blank is made by sintering diamond micropowder under the action of various metals (containing cobalt) catalysts using ultrahigh temperature and ultrahigh-pressure processes. During the sintering process, high-strength diamond bonds are formed between the diamond microcrystalline particles, and the diamond fine powder particles are strongly combined to form polycrystalline diamond (PCD). The diamond wire drawing die blank manufactured by this method has high wear resistance, hardness and thermal conductivity, but also has good mechanical strength and toughness. It is suitable for drawing copper, aluminum, nickel and other non-ferrous metals, stainless steel and various alloy wire.

E-Grind is a professional PCD diamond drawing dies supplier and manufacturer, we provide two series of pcd wire drawing die blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns.

E-Grind PCD Wire Drawing Dies Series

CDB Series: self-supported pcd die blanks, for all types of wire drawing, especially where cost is the main concern.

As one of the leading wire drawing dies suppliers, we supply lots of high quality products.

CDBL Series: self-supported Die Blanks (Hexagonal)

Part No. ADDMA No. Dimensions (mm) Max. Die Size(mm) Avg. Grain Size (um) Diagram

D d T 3 5 10 25 50

CDBL2510 D6 - 2.5 1 0.4 ○ ● ● ● - Diamond Wire Drawing Die Blanks

CDBL3215 D12 - 3.2 1.5 1 ○ ● ● ● -

CDBL5225 D15 - 5.2 2.5 1.5 ○ ● ● ● -

CDBL5235 D18 - 5.2 3.5 2 ○ ● ● ● -

Part No. ADDMA No. Dimensions (mm) Max. Die Size(mm) Avg. Grain Size (um) Diagram

D d T 3 5 10 25 50

CDBY2510 D6 - 2.5 1 0.4 ○ ● ● ● - Diamond Wire Drawing Die Blanks

CDBY 3215 D12 - 3.2 1.5 1 ○ ● ● ● -

CDBY 5225 D15 - 5.2 2.5 1.5 ○ ● ● ● -

CDBY 5235 D18 - 5.2 3.5 2 ○ ● ● ● -

CDBY 8040 D21 - 8 4 3 ○ ● ● ● -

CDBY 9853 D24 - 9.8 5.3 4 ○ ● ● ● -

CDBY 13085 D27 - 13 8.5 5 - ● ● ● ○

CDBY160120 D30 - 16 12 7 - - ● ● ○

CDBY Series: Self-supported Die Blanks (Round)

TDBY Series: tungsten carbide supported die blanks. It is for drawing with high intensity.

Tungsten Carbide supported Die Blanks (Round)

Part No. ADDMA No. Dimensions (mm) Avg. Grain Size (um) Diagram

D d T 3 5 10 25 50

TDBY4015 D12 8.12 4 1.5 - ● ● ● ● Diamond Wire Drawing Die Blanks

TDBY4023 D15 8.12 4 2.3 - ● ● ● ●

TDBY 4029 D18 8.12 4 2.9 - ● ● ● ●

TDBY 7040 D21 13.65 7 4 - ● ● ● ●

TDBY 7053 D24 13.65 7 5.3 - ● ● ● ●

TDBY 12987 D27 24.13 12.9 8.7 - ● ● ● ●

TDBY 129120 D30 24.13 12.9 12 - - ● ● ●

TDBY150120 D30 24.13 15 12 - - ● ● ●

TDBY152120 D31 24.13 15.2 12 ● ●

TDBY150120 D33 24.13 15.2 15 ● ●

ADDMA: American Diamond Die Manufactures' Association

D: Total Blank Diameter d: Diamond Diameter

T: Diamond Thickness