Cooling Tower Float Ball

Our cooling tower inc provides cooling tower filling, drift eliminator, fan, motor, gearbox, belt reducer, spray nozzle, sprinkler head, float ball, air inlet louvers, etc... Whatever cooling tower parts you need, you will find them in our cooling towers LLC AUVC.

The cooling tower float ball, also called the float valve, is designed at the bottom of the pool. When the float ball is lower than the set value, the cooling tower will make up water automatically.

One section of the float ball is fixed on the pool wall of the cooling tower and connected by sliding screws. The float ball can float up and down according to the height of the water surface. The outer end of the float ball is a make-up water interface, which is not connected with the water pipe.

Types Of Cooling Tower Float Ball

Cooling Tower Float Ball For Mesan

The cooling tower float valves are sphere,the material is ABS plastic, one section of which is fixed on the wall of the pool of the cooling tower and connected with a sliding screw. The ball valve can float up and down according to the height of the water surface. The outer end of the ball valve is the make-up water interface, which is connected with the make-up water pipe.

Cooling Tower Stainless Steel Float Ball Valve

The valve body is made of 304 stainless steel, so that all parts are well matched, and there is no corrosion loosening or tight clamping phenomenon, which ensures that the ball valve can work stably for a long time.