SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber

The glued steel fibers are water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airport pavement and other fields with its excellent tensile, bending, shear, crack resistance, impact resistance, fatigue resistance, and high toughness.

The Specification of SDS-05035 0.50mm Diameter 35mm Length Glued Hooked End Steel Fiber

The Advantages of SDS-05035 0.50mm Diameter 35mm Length Glued Hooked End Steel Fiber

It is made of high-speed wire, which could make sure it has high tensile strength;

It has good dispersion, which can make sure quick and convenient mixing and evenly spread in concrete.

Reduce steel reinforcement requirements;

Reduce crack widths and control the crack widths;

The glued steel fiber is widely used in bridge, high way, tunnel, industrial floors and etc.

Steel High Strength Fiber USER'S GUIDANCE

Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Glued Length Hooked End Steel Fiber

Star Smith is one of professional steel fiber suppliers that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.