Biens d'équipement
Flangeless Fittings
|
Model No. |
Flangeless Nut |
Ferrule Size |
Tubing OD (mm) |
B-611 |
WF10A |
YE-020 / YE-016 |
2.0 1.6(1/16") |
B-612 |
WF03G |
YE-020 / YE-016 |
|
B-613 |
WF08BL |
YE-020 / YE-016 |
|
B-614 |
WF08B |
YE-020 / YE-016 |
|
B-615 |
WF05EL |
YE-020 / YE-016 |
|
B-616 |
WF05E |
YE-020 / YE-016 |
|
B-617 |
WF06CL |
YE-020 / YE-016 |
|
B-618 |
WF06C |
YE-020 / YE-016 |
Model No. |
Flangeless Nut |
Ferrule Size |
Tubing OD (mm) |
B-619 |
WD10A |
YC-032 / YC-030 / YC-025 |
3.2 (1/8") 3.0 2.5 |
B-620 |
WD03G |
YC-032 / YC-030 / YC-025 |
|
B-621 |
WD08BL |
YC-032 / YC-030 / YC-025 |
|
B-622 |
WD08B |
YC-032 / YC-030 / YC-025 |
|
B-623 |
WD05EL |
YC-032 / YC-030 / YC-025 |
|
B-624 |
WD05E |
YC-032 / YC-030 / YC-025 |
|
B-625 |
WD06CL |
YC-032 / YC-030 / YC-025 |
|
B-626 |
WD06C |
YC-032 / YC-030 / YC-025 |
Application Note of Flangeless Fittings
1. Choose 1/4-28 nut when receiving port is 1/4-28; Choose M6 nut when receiving port is M6.
2. Before connecting fittings, ensure the end of the tubing has a clean, square, burr-free cut. This is very important, as the square cut helps the tubing make full contact with the bottom of the mating port. Neglecting to properly cut the tubing could lead to dead volume, resulting in peak distortion such as fronting, tailing or broadening.
3. Two-Piece Fittings Installation Steps:
a. Slide the nut, followed by the ferrule, at least 3/16” (4.7625mm) from the end of the clean cut tubing
b. Insert the assembly into the receiving port, pushing the tubing into the port until it bottoms out.
c. Finger tighten the nut into the port until snug.
d. After several uses (especially at high pressure) the ferrule should be replaced.
If you want to buy high quality fluid control equipment, please visit our website.
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de Flangeless Fittings Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : flangeless, fittings |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)
Samedi 01 août 2015
ACAFA Full control PC under any OS, in BIOS mode, during boot, at Blue Screens Model: AI101P Single Port KVM over IP Description: The KVM over IP technology (IP-KVM) combines digital remote KVM access via IP networks with comprehensive and integrated system management. The IP-KVM...