Donnez votre avis

Lire les avis

Ajouter au pense-bête

Imprimer

3.5/5
1
2
3
4
5

Détails

Chine (Rép. pop)

Biens d'équipement

One step injection blow molding machine/ Bottle blowing machine ISBM

Quantité : 1 piece Prix : USD50000

One step injection blow molding machine/ Bottle blowing machine ISBM

Machine Characteristics

One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry.

1) Bottle neck moulded by means of thermo-runner system. High pressure injection making accuracy of bottle mouth, bottle neck and screw thread as well as sealing ability. No joint seam, no leftover bits making reduction of raw material.

2) High efficiency of continuous production with the horizontal three-position swivel device. Automatic manufacture, no secondary pollution conforming to the requirement of sanittation.

3) Using fame brand and high quality hydraulic, pneumatic and electrical elements ensures the system's good preformance and high reliability.

4) Double propertional hydraulic system making the adjustment of hydraulic system handy and keeping system stable in performance.

5) Advanced and accurate PID temperature control system.

Typical Products for Injection Blow Molding

JARS – These are made in PP, HDPE, PS, MIPS, SAN etc. Jars are made in a wide variety of materials. The process advantage is that no secondary trimming (scrap) is required when making the neck finish. Ovaloid neck (petroleum jelly) jars can be made by injection molding the neck finish.

... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .

ONE PIECE ROLL-ON DEODORANTS in PP and HDPE. Close tolerance of the injection moulded ball seating allows an even application of the deodorant product. Snap-on ball housings are also used on SAN and PET bottles used for clarity.

DROPPER BOTTLES – Usually produced in virgin LDPE. JASU IBM machines are installed in clean manufacturing environments worldwide. The bottles can be stripped from the core rods whilst still very hot and transported to the clean room in sterile air for packing.

TABLET and PILL BOTTLES(Phamarcy Bottle) – These are made from PP, HDPE, LDPE and PS. These bottles can be designed with complicated injected neck finishes for Child Resistance or pilfer-proofing. Also the neck finish is excellent for barrier seals against moisture with a plug seal closure, and also very flat for tamper foil application.

OVALS – CYLINDRICALS AND BOSTON ROUNDS – These bottles are made in HDPE, LDPE, PP. Up to 4 cavity molds from 10-15 second cycles. QUALITY PRODUCTS do not cause problems on decoration, filling or capping lines, and are less liable to bring customer complaint.

LED Lampshade – PC/PET lamp cover for energy saving light

Blow Molding Machine-1.jpg

Compare Injection Blow Molding to Extrusion Blow Molding

Injection Blow Moulding	Extrusion Blow Molding
No scrap	20-40% scrap during production
Uniform wall thickness	Wall thickness variation
Bottle weight variation of 1%	Bottle weight variation of 3%
Slower cycle time / more cavities	Fast cycle time / less cavities
Thin walls difficult to control	Thick & thin wall capabilities
Hollow Handleware not possible	Hollow Handleware
Necks made with injection molded tolerances	Necks made with blow molded tolerances
One technician per 4-6 machines	One technician per 1-2 machines
Process is controlled and repeatable with no adjustments	Variable process requiring constant adjustment
Almost no ancillary equipment	Lots of ancillary equipment needed

Injection Blow Molding Machine Parameter
Item		Unit	Machine Type
Item		Unit	IB500-2	ISB800-3	ISB800-4
Injection Part	Screw Diameter	mm	50	40	40
	Screw L/D Ratio	L/D	23.2	23	23
	Screw Speed	r/min	0-185	0-220	0-220
	Injection Weight	G	390	195	195
	Injection Pressure	Kg/cm2	1700	1504	1504
	Max. Hydraulic Pressure	Kg/cm	140	140	140
	Plasticizing Capacity	g/s	24	14	14
	Injection Rate	g/s	128	140	140
Clamping Part	Blow Clamping Force	Kn	150	80	80
	Clamp Tonnage	Kn	600	400	400
	Wheel Diameter	mm		800	800
	Max. Height of Bottle	mm	400	400
	Open Vertical Mode Trip	mm	430	430	430
Others	Max. Pump Pressure	Mpa	16	16	16
	Motor Oil	Kw	18.5	18.5	18.5
	Electric Power	Kw	16	13	13
	Tank Volume	L	400	400	400
	Dimension of Machine	m	4.1x1.45x3.1	3.8x1.45x3.0	3.8x1.45x3.0
	Machine Weight	Ton	5	5	5

Workshop & Manufacturer

Factory Honor

Localisation : YingXing Road M., Panyu Avenue , ShiQiao, PanYu District, Guangzhou , 511400 Guangzhou,
Personne à contacter : Wade Choi, (86 20) 34809599 ext 6227

JASU Group

3.8/5

Détail

Inscrit le 27 novembre 2013

Numéro d'identification de la société : 598475627522

Site web : jasumachinery.en.made-in-china.com/

Envoyer un email à JASU Group

JASU Group

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.

Cette page concerne les importateurs et exportateurs de
One step injection blow molding machine/ Bottle blowing machine ISBM

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
machine, bottle, injection, molding, blowing, blow, step

3.2/5
1
2
3
4
5

Pologne

63-640 Divers

Embrayage électromagnétique Stromag EKE 2 S

Friday 26 May 2017

La société Multimasz offre un nouvel embrayage multi-disque électromagnétique original, Stromag EKE 1 S, 2 S, 4 S, 6 S, 10 S, 16 S, 25 S, 41 S, 64 S, 100 S, 161 S; Application: machines-outils, machines textiles, industrie du papier, boîtes de vitesses, emballages. La portée de nos...

Multimasz sp. z o.o.

63-640 - Bralin
+48 6 27 91 51 35

2.3/5
1
2
3
4
5

France

518106 Véhicule

CNC Machining ABS

Thursday 27 April 2023

Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, and is a type of polymer board that combines the excellent abrasion resistance, oil resistance, and impact resistance of PS, SAN, and BS boards. A new type of material in the fields of food...

YS RAPID MANUFACTURING LIMITED

ysrapid
518106 - shenzhen
8615817251032

2.2/5
1
2
3
4
5

Indonésie

15118 Informatique

Intermec 1-010044-910 Thermal Printhead 300 Dpi

Friday 27 January 2023

Quantité : 80 - Prix : 173,00 €

Intermec OEM Printhead 1-010044-910 for PM4i (Thick RoHS)) printers (300 dpi) Intermec 1-010044-910 OEM Thermal Printhead Pm4i 300dpi Thick RoHS Print head contained in this printer machine serves as a device for scraping ink on paper during the printing process. So, this print head...

Thermalprintheadstore

15118 - Tangerang
62 21 17588