Matières premières
RTV electronic-pouring sealant |
Performance Indicators | A | B |
Appearance | Gray Fluid | White Fluid |
Viscosity | 1500~2500(cps) | 1500~2500(cps) |
A: B | 1: 1 | |
Mixed Viscosity | 1500~2500(cps) | |
Operable Time | 30~120(min) (Adjustable) | |
Curing Time | 3~5(h) |
After The Curing
Hardness | 40~50(Shore A) |
Dielectric Strength | ≥20(kV/mm) |
Dielectric Constant | 3.12(1.2MHz) |
Thermal Conductivity | ≥0.6[W/m.k] |
Volume Resistivity | ≥1.0×1014(Ω·cm) |
Specific Gravity | 1.56±0.02(g/cm3) |
Flammability Rating | UL94 V-0 |
•20kg/set(A10kg+B10kg), packaging with bucket.
APPLICATION RANGE
APPLICATION RANGE
Widely used in various types of electronic
components, play the role of heat conduction, fire retardant, waterproof.
|
Powr Equipment | Power Supply | Junction Box |
Powr Equipment | Power Supply |
PRODUCTION CHARACTERISTICS
PRODUCTION CHARACTERISTICS
Can be used in harsh environments for a long time
The silicone sealant has the performance of superior
high and low resistance, excellent insulation, high
stability with thermal oxidation and ozone. It can be widely usesd in aerospace, automotive electronics, office equipment, construction and so on.
|
Effectively prolong the service life of electronic components
Silicone sealant has superior thermal conduction and
bonding property.it not only can fixed the
electronic components, make heat transferring to the
heat sink, to prevent overheating of electronic
components to avoid resulting in break down,
which can improve the service life.
|
WISE CHOOSE
OUR ADVANTAGE
Our company is committed to providing superior solution about
silicone rubber for customers,we have long-term cooperation with
many famous customers of industry and listed company.
4 MAIN REASONS | ||
GOOD THERMAL CONDUCTION
Ensure a higher stability of power supply
|
||||||
GOOD SELF-EXTINGUISHMENT
Improve safety factor of power supply
|
||||
GOOD ADHESION
Improve water-proof performance
|
||||
GOOD ANTI-AGING
Resist the erosion of natural environment
|
||||
METHOD OF OPERATION
INSTRUCTIONS
Preparing: Stir completely A and B in each container,
Mixing:A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixed thoroughly when mixing the wall rubber of container into the plastic material.
De-airing: after mixing which should vacuum degassing for 1-3 minutes.
Potting: The mixture should be poured into the product as soon as possible, in order to avoid thickening and resulting in poor fluidity.
Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing . The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for 15 minutes at 80 ° C ~ 100 ° C, about 12 hours at room temperature.
MATTERS NEEDING ATTENTION
NOTE
1、The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
2、The product don't belong to dangerous goods, but avoid contacting skin and eyes.
3、The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
4、Stored for a period of time, the plastic may be layered. So please stir well before using, and can't affect its performance.
5、The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A, incompletely cured condensation type silicone rubber.
B.amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
SPECIFICATION TRANSPORT
PACKAGING
1、20kg/set(A10kg+B10kg), packaging with bucket.
2、1 year shelf life if stored below 25 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
3、These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de RTV electronic-pouring sealant Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : sealant, electronic, pouring |
Vendredi 09 juin 2023
Quantité : >100,000 l - Prix : USD 0.05 - USD 135
Feton smart light downlight of Ultra Lighti series is new kinds of lamp. It's with 405nm disinfection light but can be emitted as white light with various color temperature. Suitable for place like suermarket or canteen, it extended the food fresh time while lighting up the showcase or shelf...
Samedi 20 août 2022
亚克力冰箱磁铁 亚克力冰箱贴是礼品店、纪念品店、餐厅等的绝佳选择。它也是一个很好的促销或广告商业 工具。亚克力磁铁有不同的形状和尺寸,包括动物形状、水果形状等。这种磁铁很容易做成 你喜欢的任何设计和形状。 更重要的是,它可以定制您自己的标志或其他特殊设计。您可以使用我们的免费设计服务或 提供您自己的设计。我们很容易到达,非常友好,并且热衷于制造高端产品并保证最好的质 量。 无论您是想制作不同材料、尺寸、形状和颜色的品牌徽标钥匙扣以进行促销,还是想根据自 己的喜好定制自己的产品,我们公司随时为您服务。 我们为您提供 OEM/ODM 服务和设计解决方案!我们不仅提供高品质的产品,而且以有竞争力的价格...
Jeudi 02 mai 2024
Prix : 3 EUR HT
DESTOCKAGE D ENSEMBLES LAYETTE AU PRIX DE 3 EUROS ! ALORS N'HESITEZ PLUS... . STOCK LIMITE ENSEMBLES BEBE .100% COTON. CONDITIONNEMENT : COLIS CONDITIONNE DE 20 PIECES 6 9 12 18 23 ORANGE 2 2 2 2 2 VERT CITRON 2 2 2 2 2 PRIX : 3 EUR HT Nous lançons une opération...