Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds
1260
Donnez votre avis
Lire les avis
Ajouter au pense-bête
Imprimer
  • 2.4/5
  • 1
  • 2
  • 3
  • 4
  • 5
Détails
Chine (Rép. pop) Matières premières

Signalez un abus

Matières premières

Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds

Quantité : 60t/Month   Prix : USD8.52 / kilogram

Description of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:


Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craft works, lightings, candles, etc. And fabrication of precision molds.

Specification of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

Model

Mixing Ratio

Color

Hardness

Viscosity

Working Time

Curing Time

Tear-

Strength

(kg/cm)

Tensile- Strength

(Mpa)

Elongation

(%)

Shrinkage

(%)

J825

1: 1

translucent

25±2

10000

±2000

1-60mins

0.5-24h

20±3

≥5.0

≥400

<0.1</span>

Features of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

- Outstanding release properties
- High Flow-ability and long working time
- Medium Hardness
- High tear resistance
- High elasticity for easy removal of complex replica parts

Materials you can cast into cake, chocolate,cookie molds

A: Cultural relic duplication, architectural decoration, statues
B: Polyester Resin crafts
C: Lighting ornaments, soap, candles molding
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.

Instructions of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:


1-Take 100g of part A and add 100g of part B and mix the two parts silicone rubber evenly.

2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available

3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.

Storage and Precautions of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

If you need any help on silicone rubber, please feel free to contact Mr Jack:

Contact: Mr. Jack

Email: jack.ottsilicone(at)foxmail.com

Localisation : First Floor, Building A1, Tangkou 236 Industrial Zone, Tuanjie Village, Xinhua Street, 510800 Guangzhou,
Personne à contacter : Jack HU, +862086819712

ottsilicone

  • 2.9/5
Détail
Inscrit le 17 mars 2016

Numéro d'identification de la société : 440121000184547

ottsilicone

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds

Rechercher dans la catégorie : Matières premières
Rechercher dans la catégorie :
liquid, silicone, parts, addition, food, cure, rubber
  • 2.2/5
  • 1
  • 2
  • 3
  • 4
  • 5
France 467000 Pro / B2B

Signalez un abus

GRAPHITE ROD ELECTRODE
GRAPHITE ROD ELECTRODE

Saturday 10 September 2022

Graphite is widely used in the electrical industry as electrode, brush, carbon rod, carbon tube, positive electrode of mercury rectifier, graphite gasket, telephone parts, television picture tube coating and so on. Among them, graphite rods for electrolysis is the most widely used...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960
  • 2.5/5
  • 1
  • 2
  • 3
  • 4
  • 5
Taiwan 330 High Tech

Signalez un abus

Pièces de haut-parleur: plaque arrière et jougs de pot fabriqués à Taiwan
Pièces de haut-parleur: plaque arrière et jougs de pot fabriqués à Taiwan

Wednesday 21 October 2020

SHINING JINS ENTERPRISE specializing in manufacturing & designing cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver in Taiwan. We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
  • 2.3/5
  • 1
  • 2
  • 3
  • 4
  • 5
France 528300 Maroquinerie / Bagagerie

Signalez un abus

LED Antimicrobial Lighting Wholesale
LED Antimicrobial Lighting Wholesale

Wednesday 22 May 2024

LED antimicrobial light refers to a type of lighting technology that incorporates antimicrobial properties into LED lights. These lights are designed to help reduce or eliminate harmful microorganisms such as bacteria, viruses, or fungi. As a professional LED grow light manufacturer...

Foshan Feiliu Enterprise Management co.LTD

  • 528300 - Foshan
  • 86 757 29311003