Informatique
China Manufacturer Mosi2 Heating Elements
|
Volume Density |
Bending Strength |
Vickers Hardness |
Porosity |
Water absorption |
Heating Elongation Rate |
5.5g/cm3 |
15-25kg/cm2 |
(HV)570kg/mm2 |
7.4% |
1.2% |
4% |
2. Chemistry Property
Mosi2 heating element is used in the high temperature under oxidizing atmosphere. It will form the SiO2 film which can keep the element from being melted. When the temperature of element is more than 1700 °C, the SiO2 protecting film is formed again when the element continues to be used. The Mosi2 heating element must not be used in the temperature between 400°C and 700°C, otherwise the element will be creamed under the strong oxidizing function in the low temperature.
3. The using temperature under the different atmosphere
Atmosphere |
The Maximum Using Temperature of Element |
|
1700 Grade |
1800 Grade |
|
NO2,Co2,O2,Air |
1700°C |
1800°C |
He, Ar , Ne |
1650°C |
1750°C |
SO2 |
1600°C |
1700°C |
CO,H2 |
1500°C |
1600°C |
Wet H2 |
1400°C |
1500°C |
Dry H2 |
1350°C |
1450°C |
Advice of Installation
1. MoSi2 heating element is very brittle under room temperature and plastic under high temperature. Therefore, it's the best way for installation of U type element to hang it vertically. Such way is to avoid putting the mechanical stress directly to the Hot Zone of the element, otherwise, the element will be broken easily. If it needs hang horizontally, please choose a support of high temperature refractory.
2. Please put the taper part of the element bottom into the furnace chamber to avoid local overheating.
3. The lead wire should be a little longer than the linear distance between the element and the bus to avoid putting the stress to the element.
4. Please don't tighten the screw of clamps too much at one time. It can be tightened when the element heats up to high temperature because of the element's plasticity.
5. The temperature of the clip should be less than 200°C, the contact voltage between the clip and the element should be less than 0.1V.
6. The distance between the lower end of the clip and the upper surface of the through brick should be more than 50mm, to avoid the radiation heat conducting to the clip.
7. To avoid damage, 170A couldn't be used for long term for the element of Ø6/12mm; 300A couldn't be used for long time used for the element of Ø9/18mm.
Package and shipping
1.Package
First carton packaging with plastic inside to protect, then wooden packaging outside;
For some special conditions, use iron hanger outside wooden case.
2. Shipping
Fedex/DHL/UPS/TNT for samples, Door-to-Door;
By Air or by Sea for batch goods;
Customers specifying freight forwarders or negotiable shipping methods;
Delivery Time: 3-7 days for samples; 5-25 days for batch goods.
When you enquiry, please tell us the following data:
DI: Diameter of Hot Zone(mm)
D2: Diameter of Cold Zone(mm)
Le: Length of Hot Zone(mm)
Lu: Length of Cold Zone(mm)
A: Shank Spacing(mm)
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de China Manufacturer Mosi2 Heating Elements Rechercher dans la catégorie : Informatique Rechercher dans la catégorie : elements, heating, mosi2, manufacturer, china |
Samedi 15 août 2015
Quantité : 1000 at le - Prix : To be discussed
Main Specification Brand Name: Rooman Model Number: RM-ET100 Toothbrush type: Sonic Electric Toothbrush Color: White and other as per customers'demand Service Voltage(V): 2.4V /DC Input Voltage (V): 100-240V AC Rated Power(HZ): 50/60 Power (W): 1.6 Noise Level ( dB): 60 Display Mode...
Mercredi 03 juillet 2013
Quantité : 500 - Prix : $0.5
Ceramic button Main features are: noble quality, belonging gem treasures. A costume to spend gems buttons on the show its high value and rich, so they can meet some people to pursue glory psychological; gem superior performance than everyday use resin buttons, metal, shellfish buttons...
Mardi 16 juin 2015
Quantité : 100 roll
JC-Paper Series Refractory ceramic fiber paper sealing gasket Product Description: The ceramic fiber paper is manufactured by refractory fiber with high purity which is used in high-temperature insulating fields. The advance manufacturing technology makes the distribution of ...