China Manufacturer Mosi2 Heating Elements
Molybdenum disilicide (Mosi2) heating element is a resistance generate-heating component made from Mosi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light Sio2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800°C during oxidizing atmosphere. And the applicable temperature is 500-1700°C.
Physical and Chemical Properties
1. Physical Property
Volume Density |
Bending Strength |
Vickers Hardness |
Porosity |
Water absorption |
Heating Elongation Rate |
5.5g/cm3 |
15-25kg/cm2 |
(HV)570kg/mm2 |
7.4% |
1.2% |
4% |
2. Chemistry Property
Mosi2 heating element is used in the high temperature under oxidizing atmosphere. It will form the SiO2 film which can keep the element from being melted. When the temperature of element is more than 1700 °C, the SiO2 protecting film is formed again when the element continues to be used. The Mosi2 heating element must not be used in the temperature between 400°C and 700°C, otherwise the element will be creamed under the strong oxidizing function in the low temperature.
3. The using temperature under the different atmosphere
Atmosphere |
The Maximum Using Temperature of Element |
|
1700 Grade |
1800 Grade |
|
NO2,Co2,O2,Air |
1700°C |
1800°C |
He, Ar , Ne |
1650°C |
1750°C |
SO2 |
1600°C |
1700°C |
CO,H2 |
1500°C |
1600°C |
Wet H2 |
1400°C |
1500°C |
Dry H2 |
1350°C |
1450°C |
Advice of Installation
1. MoSi2 heating element is very brittle under room temperature and plastic under high temperature. Therefore, it's the best way for installation of U type element to hang it vertically. Such way is to avoid putting the mechanical stress directly to the Hot Zone of the element, otherwise, the element will be broken easily. If it needs hang horizontally, please choose a support of high temperature refractory.
2. Please put the taper part of the element bottom into the furnace chamber to avoid local overheating.
3. The lead wire should be a little longer than the linear distance between the element and the bus to avoid putting the stress to the element.
4. Please don't tighten the screw of clamps too much at one time. It can be tightened when the element heats up to high temperature because of the element's plasticity.
5. The temperature of the clip should be less than 200°C, the contact voltage between the clip and the element should be less than 0.1V.
6. The distance between the lower end of the clip and the upper surface of the through brick should be more than 50mm, to avoid the radiation heat conducting to the clip.
7. To avoid damage, 170A couldn't be used for long term for the element of Ø6/12mm; 300A couldn't be used for long time used for the element of Ø9/18mm.
Package and shipping
1.Package
First carton packaging with plastic inside to protect, then wooden packaging outside;
For some special conditions, use iron hanger outside wooden case.
2. Shipping
Fedex/DHL/UPS/TNT for samples, Door-to-Door;
By Air or by Sea for batch goods;
Customers specifying freight forwarders or negotiable shipping methods;
Delivery Time: 3-7 days for samples; 5-25 days for batch goods.
When you enquiry, please tell us the following data:
DI: Diameter of Hot Zone(mm)
D2: Diameter of Cold Zone(mm)
Le: Length of Hot Zone(mm)
Lu: Length of Cold Zone(mm)
A: Shank Spacing(mm)
Personne à contacter : Serena Lee, +86 371 62801118
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de China Manufacturer Mosi2 Heating Elements Rechercher dans la catégorie : Informatique Rechercher dans la catégorie : elements, manufacturer, heating, mosi2, china |
Dimanche 19 mai 2024
Quantité : MOQ200 - Prix : To be discussed
Key Specification: - Color: Various color can be chosed - Input Voltage: 12V DC - Power (W): 8.5W - Noise Level: 47dB - Display Mode:LED - Control Mode: Touch screen - CADR: 40m³/H - Purifying Rate: 99.7% - Length Of Power Cord: 2.2M standard or as per customers'...
Rooman Electrical Appliances Co., Ltd.
- Rooman1
- 523929 - Dongguan
- +13 6 62 88 32 70
Mercredi 23 mars 2016
12 balls package £1,900.00 Guarantee: We test each ball for to ensure the ball seamed exactly well. Delivery time: arrive within 14 days after payment Logo printing: free Warranty: 1 year quality guarantee and free repair kit. About PVC/TPU inflatable body zorb ball : Q: What is...
zorbingfootball
- NW61HS - London
- 720 316 2788
Mercredi 22 mai 2024
Quantité : 500 - Prix : USD0.5/pc
100 years American Technology China Excellent Manufacturing Partner of Fortune top 500 A Leading Brand in Hose Clamp Industry Germany Type Hose clamp KEBG12X032 1)bandwidth:12mm 2)Thickness: 0.6mm 3)Material: W4 Stainless Steel 304ss 4)Diameter range: 20-32mm 5)These clamps...
King Seal Fastener Technology(Anhui) Co., Ltd.
- 233010 - Bengbu
- 86 552 4193229