Automatic Wrinkle Recovery Tester
Détails
Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Automatic Wrinkle Recovery Tester

The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the specimen under standard atmospheric conditions and to maintain the specified time. The overall structure of the instrument and the precise spiral column ensure that the loaded specimens produce a uniform deformation. After removing the sample from the instrument, re-adjust the sample under standard atmospheric conditions and allow it to recover for a certain period of time, and then compare the sample with the reference sample to assess the appearance of the sample.
The instrument consists of a base with a bracket, the base of the fixed steel plate and the top of the movable steel plate to match ,the activities of the flange with the locking pin. Equipped with four standard weights, respectively, 2000g, 1000g, 500kg, 200kg.

Application
The wrinkle recovery test instrument detects the recovery of the specimen after a certain period of time under a load. It is suitable for any fiber pure or blended fabric test. Besides, it can not maintain the shape of stable materials under the characteristics of the conditions, such as the material which is soft, thin and easy to bend. We can evaluate its anti-crease performance through this device.
Standards:
AATCC 128 Wrinkle recovery of fabrics: Appearance method
ISO 9867 Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method
ENKA 3061
Accessories:
(1)First ,use the pressure sample device, three samples are tested continuously. The interval is about 1min;
(2)Fold the sample face to face. Cloth edge clip with a clip, not more than 5mm;
(3)In some cases the sample surface will be stained together. We should use a piece of paper or aluminum foil whose size is 18x14mm. Be careful not to contact the sample by hand;
(4)Place the folded sample between the two briquettes and apply the weight immediately. Turn on the chronograph and wait 60 + 2 seconds. Prepare the next sample according to 2,3,4 steps.
(5)After 5 minutes, remove the first piece of weight quickly and easily. Transfer the folded sample with the clip to the sample rack of the measuring instrument;
(6)Remove the paper or aluminum foil. Place one side of the sample in the sample holder and the other side is the free hanging. After 60 +2 seconds, Put the second and third pieces of samples into the sample folder;
(7)Adjust the instrument so that the hanging end of the sample is consistent with the vertical mark of the instrument, within 5min should be constantly adjusted (so that the hanging end of the sample is consistent with the vertical mark of the instrument,) to avoid the impact of gravity;
(8)After 5 minutes, record the recovery angle of the sample. If the sagging side is slightly curled or twisted to pass through the vertical plane of the center of the droop and the axis of the dial as a reference for the crease return angle reading;
(9)Repeat the above steps, and then do three negative fold of the sample and the zonal frontal fold and the opposite fold (a total of 12).


Technical Parameters
Items Parameters< /span>
Sample size 15cm×28cm(6×11inch)
Weights 2000g，1000g，500kg，200kg Accumulate
Dimensions 150×150×330mm(L×W×H)< /span>
Weight 9.5kg(21lb)
Standard weights（2000g、1000g、500kg、200kg）
Full set 5 inch x 3 inch (5 / set)
The rating card (optional)

Localisation : No. 2578 Minhang District Gu Dai Road, Shanghai, 201199 Shanghai,
Personne à contacter : Sun Qin, +86 21 6780 0179

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Automatic Wrinkle Recovery Tester

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
tester, wrinkle, automatic, recovery
Turquie 06370 Alimentaire
Machine de sucre

Sunday 15 March 2015

TAYSAN MAKINA CO. Sarl. Est une entreprise qui fait la production des machines types R entièrement automatiques et manuel à fabriquer du sucre en cubes dur en Turquie et aussi des machines à emballage alimentaires divers et sucre en morceaux depuis une expérience de dix ans. Avec...

Taysan Makina Ltd

  • taysanmakina
  • 06370 - Ankara
  • 0090 312 396 01 09
  • 0090 546 610 06 05
Hong Kong 050000 Divers
Woven Middle Speed Corrugator Belt

Tuesday 16 June 2015

Quantité : 10000m2/we - Prix : USD 80-90/m2

Woven Middle Speed Corrugator Belt Woven High Speed Corrugator Belt was developed to high speed running and rapid dying of the corrugat ed board.the structure and the quality of the belt facilitates steam evaporation from the paperboard .The surface of the belt is twill weave to...

Huatao Wire Belt Factory

  • 050000 - shijiazhuang
  • 86 311 80772027
Espagne 30410 Alimentaire
Alimentation Energétique Chevaux

Thursday 08 October 2015

Quantité : Mini 24T - Prix : 355 à 618 Euros/Tonn

PRESTIGE FORCE Aliment floconné complet en complément de la ration de volume pour chevaux et poneys de sport au travail moyen à intense. Quantité de 0.5 – 1.5 Kg d'aliment pour 100 Kg de poids, en fonction de l'âge, de la taille et de l'activité du cheval. Répartir au minimum...

Agrofood Ganados

  • 30410 - Murcia
  • +34 9 68 10 66 28
  • +34 6 72 36 35 29