Steel Bloom
Détails
Chine (Rép. pop) Habillement / Mode
Habillement / Mode

Steel Bloom

Description of SteelBloom
Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting.

Production Procedure of Steel Bloom

The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs.

After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm.

Huaro, as an excellent tinplate steel sheets supplier, offers a wide range of steel products for you to choose from.

Localisation : 6301, 63rd Floor, Shanghai Tower, Lujiazui Financial And Trade Zone, Shanghai, China, 200120 Shangahi,
Personne à contacter : li kevin, +86 21 68818789

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Steel Bloom

Rechercher dans la catégorie : Habillement / Mode
Rechercher dans la catégorie :
bloom, steel
Pays-Bas 3454 jc Pro / B2B
photo non disponible

Saturday 29 November 2014

Quantité : 1-1000 - Prix : 1,00 €

- - Estamos callos - c molde de inyección fabricante en China son nuestros esencial del diseño para nuestro diseño de moldes 1. Use la estructura base del molde estándar establecido de base del molde de inyección . 2. uso es de acero o las piezas de moldeo de plástico estándar misma...

triple-c

  • 3454 jc - de meern
  • +31 3 06 66 56 78
  • +31 3 06 66 76 38
Taiwan 24158 Biens d'équipement
Small Hole Drilling EDM Series D50,D60,SD60

Thursday 06 August 2015

Quantité : 30 sets

Manual type & CNC Drilling EDM profession manufacturer. Drilling capacity dia. is fromФ0.1mm to Ф6.0mm. High verticality (deviation) is lower than 0.03. Inbuilt water filtration system and pure water available. Ion Exchange Resin Treatment Filter support more machines and...

Sane Kuei Machinery Co., Ltd

Taiwan 830 Bâtiment
Wood Screws

Tuesday 15 September 2026

Quantité : 100,000 pc

JBI is one of the leading professional screw suppliers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...

Jeng Bright International Corporation

  • jbitwco
  • 830 - Kaohsiung City
  • +88 6 77 02 10 77