Carbide saw tips
Détails
Chine (Rép. pop) Matières premières
Matières premières

Carbide saw tips

Quantité : 100KG   Prix : 50-60USD/KG


◆We produce according to customer's request.

Properties of grades

Grade
Density
(g/cm3)
Hardness (HRA)
TRS
(MPa)
Average Grain size
(ųm)
YG6/ K20
14.85～15.05
≥90.5
≥1860
In
YG8/K30
14.60～14.85
≥89.7
≥2060
In
YK08/K40
14.50～14.80
≥88.0
≥2060
Coarse
JX5/K20
14.65～14.85
≥90.0
≥2060
In
YG6X/K10
14.70～14.85
≥91.7
≥1860
Fine
YG8X/K10
14.60～14.85
≥91.0
≥2000
Fine
K10S
14.70～14.85
≥91.7
≥3000
Fine
K20S
14.60～14.80
≥91.0
≥3000
Fine
K10UF
14.70～14.95
≥93.0
≥3000
Superfine
K20UF
14.50～14.80
≥92.0
≥3000
Superfine
K30UF
14.25～14.55
≥91.0
≥3050
Superfine
R06
14.70～14.85
≥93.5
≥2400
Superfine
R03
14.90～15.10
≥94.0
≥2000
Superfine
YC40
12.80～13.30
≥89.5
≥1700
In
YC501
12.70～13.30
≥90.5
≥1680
In
Application recommended

Grade
Applications recommended
YG6/ K20
For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
YG8/K30
For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
YK08/K40
For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
JX5/K20
For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
YG6X/K10
For the cutting of the wood specially, recommend to use the high frequency welding
YG8X/K10
For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
K10S
For the cutting of the hard wood specially, Recommend to use the high frequency welding
K20S
For the cutting of the aluminum specially, Recommend to use the high frequency welding
K10UF
For the cutting of the plywood、board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
K20UF
For the cutting of the aluminum specially, Use the high frequency welding
K30UF
For the cutting of the stones specially, Use the high frequency welding
R06
For the cutting of the plywood、density board and the sandwich board, Use the high frequency welding
R03
For the cutting of the timber such as shaving board、laminated boar、density board and compound material etc, Use the high frequency welding
YC40
For the cutting of the large cast materials, Recommend to use the high frequency welding
YC501
For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding
Localisation : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou,
Personne à contacter : Elanie Wang, 86 15886366906

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Carbide saw tips

Rechercher dans la catégorie : Matières premières
Rechercher dans la catégorie :
tips, carbide
France 201615 Pro / B2B
TTA184: Diglycidyl 1,2-cyclohexanedicarboxylate Cas 5493-45-8

Wednesday 10 January 2024

TTA184: diglycidyl 1 2 cyclohexanedicarboxylate Cas 5493 45 8 TTA184 is a typical epoxy resin with low viscosity, low chlorine, and excellent weather resistance. Its finished cured product has high crosslinking density and certain toughness. It is especially suitable for insulating...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697
Indonésie 55225 Informatique
Kyocera Inkjet Printhead KJ4B-0300 series 300dpi

Friday 12 November 2021

Quantité : 500 - Prix : $1,910.00

Original for kyocera Print head for textile printer water based KJ4B-0300 Original KJ4B-0300 Series Printhead Solvent Print Head for Kyocera Print Head Printing Machine. This new generation Kyocera KJ4B-0300 is designed for high speed single-pass applications with printers using aqueous ink...

dwikisworo.com

  • 55225 - Yogyakarta
  • 6285762678702
Indonésie 15122 Informatique
Seiko Spt-1020 printhead

Tuesday 13 October 2026

Quantité : 1 - Prix : 1 550,00 €

- Seiko Spt-1020 printhead - Technical Specifications: - Active nozzles: 1020 - Nozzle density: 185 npi - Print swathe width:71.9 mm - Native resolution: 360 dpi - Max. Resolution: 720 dpi - Firing frequency: 6.46 or 8.29 Khz - Drop Size: 35 pl Printer compatibility: FY-Union...

Printer-Head

  • 15122 - Jakarta
  • +62 852 70708959