Carbide saw tips

Quantité : 100KG Prix : 50-60USD/KG

◆We produce according to customer's request.

Properties of grades

Grade	Density (g/cm3)	Hardness (HRA)	TRS (MPa)	Average Grain size (ųm)
YG6/ K20	14.85～15.05	≥90.5	≥1860	In
YG8/K30	14.60～14.85	≥89.7	≥2060	In
YK08/K40	14.50～14.80	≥88.0	≥2060	Coarse
JX5/K20	14.65～14.85	≥90.0	≥2060	In
YG6X/K10	14.70～14.85	≥91.7	≥1860	Fine
YG8X/K10	14.60～14.85	≥91.0	≥2000	Fine
K10S	14.70～14.85	≥91.7	≥3000	Fine
K20S	14.60～14.80	≥91.0	≥3000	Fine
K10UF	14.70～14.95	≥93.0	≥3000	Superfine
K20UF	14.50～14.80	≥92.0	≥3000	Superfine
K30UF	14.25～14.55	≥91.0	≥3050	Superfine
R06	14.70～14.85	≥93.5	≥2400	Superfine
R03	14.90～15.10	≥94.0	≥2000	Superfine
YC40	12.80～13.30	≥89.5	≥1700	In
YC501	12.70～13.30	≥90.5	≥1680	In

Application recommended

Grade	Applications recommended
YG6/ K20	For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
YG8/K30	For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
YK08/K40	For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
JX5/K20	For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
YG6X/K10	For the cutting of the wood specially, recommend to use the high frequency welding
YG8X/K10	For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
K10S	For the cutting of the hard wood specially, Recommend to use the high frequency welding
K20S	For the cutting of the aluminum specially, Recommend to use the high frequency welding
K10UF	For the cutting of the plywood、board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
K20UF	For the cutting of the aluminum specially, Use the high frequency welding
K30UF	For the cutting of the stones specially, Use the high frequency welding
R06	For the cutting of the plywood、density board and the sandwich board, Use the high frequency welding
R03	For the cutting of the timber such as shaving board、laminated boar、density board and compound material etc, Use the high frequency welding
YC40	For the cutting of the large cast materials, Recommend to use the high frequency welding
YC501	For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding

Localisation : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou,
Personne à contacter : Elanie Wang, 86 15886366906

wendy wang

3.5/5

Détail

Inscrit le 04 novembre 2012

Numéro d'identification de la société : 2456432

Site web : www.zzgcarbide.com

wendy wang

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.

Cette page concerne les importateurs et exportateurs de
Carbide saw tips

Rechercher dans la catégorie : Matières premières
Rechercher dans la catégorie :
carbide, tips

2.8/5
1
2
3
4
5

France

201615 Pro / B2B

TTA184: Diglycidyl 1,2-cyclohexanedicarboxylate Cas 5493-45-8

Wednesday 10 January 2024

TTA184: diglycidyl 1 2 cyclohexanedicarboxylate Cas 5493 45 8 TTA184 is a typical epoxy resin with low viscosity, low chlorine, and excellent weather resistance. Its finished cured product has high crosslinking density and certain toughness. It is especially suitable for insulating...

Jiangsu Tetra New Material Technology Co., Ltd.

201615 - Songjiang
0086 2154265697

2.7/5
1
2
3
4
5

Hong Kong

116000 Pro / B2B

$Usine de briques refractaires$

Usine de briques refractaires

Tuesday 30 October 2018

this series of bricks are made from high quality fused MgO,fused corundum and graphite as main raw materials and phenolic resin as binder . the products are mainly used in the bottom and sidewall of ladle with better corrosion and erosion resistance. Localisation : 403, D-5 Building...