Matières premières
Addition cure silicone rubber for tire mold |
Product |
E620 |
Appearance |
Translucent |
Hardness(shore A) |
20±2 |
Mix ratio(A: B) |
1: 1/10: 1 |
Viscocity Part A(mPa.s) |
23000±2000 |
Viscocity Part B(mPa.s) |
3500±500 |
Tensile strength (kgf/cm2) |
45±5 |
Tear-strength (kN/m) |
20±2 |
Elongation(%) |
500±50 |
Pot life/working time (mins) |
30-40 |
Curing time/setting time (hrs) |
3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) |
0.1 |
Addition cure silicone rubber for tire mold making operation:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1: 1/10: 1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water)
on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Addition cure silicone rubber for tire mold making package:
If ratio is 1: 1 : Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10: 1 : Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel: 86-755-89212369
Mob: 86-18938867593
e-mail: hyjz(at)szrl(dot)net
Skype: kity-467707861
Bonne affaire : acheter au vendeur
Cette page concerne les importateurs et exportateurs de Addition cure silicone rubber for tire mold Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : addition, cure, tire, silicone, rubber, mold |
Jeudi 18 janvier 2024
All series of iPandee MPPT solar charging controllers incorporate new design concepts, keep up with the development of science and technology, adapt to the needs of cutting-edge off-grid system applications, and adopt our own patented MPPT control algorithm technology, which can always...
Jeudi 23 juin 2022
Quantité : 100 - Prix : 1,00 €
Fabricants de Ghassoul Quels sont les avantages de l'argile des fabricants de ghassoul pour la peau et les cheveux ? Histoire de l'argile des fabricants de ghassoul : L'argile des fabricants de Ghassoul est une sorte fantastique d'argile apaisante. Elle est surtout utilisée à des fins externes...
Dimanche 10 janvier 2021
Quantité : 3 - Prix : 17,00 €
1 This specification handles metal and metal bolting for strain valves and valves, and flangesfittings to secure increased distress or greater pressure assist, or other special purpose software. Cable and Utilities will most likely be hot-wrought and May be further farther processed...