Biens d'équipement - Import Export

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

PA66 GF30 Car Parts Plastic Injection Mold If you want to get the product is straight, your mold design and mold processing are also made straight, but there will be a bent product, deformed or the product size is out tolerance, they were caused by material, temperature, shrinkage...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The runner filling balance must be considered when designing the multi cavity plastic mold in order to ensure the best effect of filling balance, the multi cavity mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Multi Cavity Medical Mold USM is an ISO9001: 2015 certified plastic moulding services factory, with over 15 years of professional experience and advanced equipment, we've got many successful cases in multi cavity soft plastic mold, there are 10 engineers could assist our customers...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

USM will offer suggestions according to product requirments, quantity, material cost and so on to chose the hot runner in order to help customers to save cost. Hot runners are divided into open hot nozzles, pin-point hot nozzles, valve hot nozzles, etc. our engineer will chose the...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Metal Insert Molding Choosing suitable material and molding conditions, not only for products that are easily deformed and damaged (such as glass, coils, electrical parts, etc.), can also be sealed and fixed by material. Choosing a suitable mold structure, the insert product can also...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Medical TPE Mold Design is the source of a high-quality mold, one good mold design will be half success, USM uses the world's leading software to analyze products and make DFM reports and mold flow analysis to eliminate the appearance of defective and defective products from the source...

Tuesday 02 August 2022

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of applications...

Tuesday 02 August 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Tuesday 02 August 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Tuesday 02 August 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday 02 August 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Tuesday 02 August 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical silicone injection molding and medical grade silicone injection molding...

Tuesday 02 August 2022

Packson is not totally the same as other medical molding companies. Because we are an ISO-certified medical molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical companies like BD, Wondfo since 2008...

Tuesday 02 August 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Overview of C & U Channel Roll Forming Machine Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It consists of a wide "web" and two "flanges". The flanges could be parallel or tapered. U channel roll forming machine and c channel roll forming...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck. A stack of rollers are used to shape the flat sheet into the required purlin shape. Structural C and Z section purlins are made of high...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Corrugated sheet roll forming machine is Suitable for simple roof construction, it is the most economical system in thin metal roofing systems. It is widely used in the roofs of civil public buildings and industrial buildings, such as stadiums, awnings, exhibition halls, stadiums...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Ceiling roll forming machine is a special machine designed for the ceiling industry. It has high speed and high efficiency, stable performance, low energy consumption, low noise, etc., beautiful appearance, compact structure and responsive. And we can provide a competitive ceiling...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Cable trays are becoming more and more widely used in modern buildings. Traditional manual production can no longer meet the demand, and the industry urgently needs the input of automated production lines to increase production/reduction of artificially improved product quality and...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

The impeller of billet compressor consists of hub, blade and cover. The cover of the submerged pump impeller and the rear cover are divided. The cover on the inlet side of the impeller is called the front cover, and the cover on the other side is called the rear cover. According to...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile cold forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine must...

Saturday 30 July 2022

Quantité : Make to or - Prix : AUS $0.20-12 per uni

Our moulded fibre packaging is made purely from natural annual growth fibres such as sugarcane bagasse, wheat straw, bamboo and wood chips so its fully biodegradable and compostable. Our moulded fibre box and insert are an innovative and sustainable solution to standard foam or plastic...

Saturday 30 July 2022

Quantité : Make to or - Prix : AUS $0.20-12 per uni

Easy assembly Comes flat pack so you can save on storage costs Strong, stable and secure for your products Crash lock bottom box is the most common type of boxes in retail and perfect paper box for product packaging. We offer custom cardboard packaging boxes that can be made to meet...

Saturday 30 July 2022

Quantité : Make to or - Prix : AUS $0.20-12 per uni

eco-friendly packaging for mailing your products in a way that benefits the environment made with light, strong and flexible materials custom size, colour, printing Our custom compostable mailers made with light, strong and flexible materials are great alternatives to plastic poly...

Saturday 30 July 2022

Quantité : Make to or - Prix : AUS $0.20-12 per uni

Are you tired of applying labels to your coffee pouches? Consider to invest in Ecolution Packaging's biodegradable coffee packaging. We know that coffee comes in many unique varieties and flavours, so personalised and innovative coffee packaging designs are needed to reflect the...

Friday 29 July 2022

Quantité : 1 - Prix : 150,00 €

Moroccan pouf made of leather in different colors Add a traditional Moroccan touch to your interior décor with our exceptional collection of hand embroidered leather pillows. Our exquisitely crafted Moroccan leather will add an exotic touch to your room, or as a stool in your living room...

Friday 29 July 2022

Nous mettons votre dispostion des lot composé de plusieur chaises avec accoudoir Localisation : 18, rue A/ Croizat, 95100 ARGENTEUIL, Personne à contacter : DKM EXPORT DKM EXPORT, 01 30 00 00 00

Friday 29 July 2022

Nous mettons a votre disposition plusieur fauteuil de bureau a roulette, disponible en lot. Localisation : 18, rue A/ Croizat, 95100 ARGENTEUIL, Personne à contacter : DKM EXPORT DKM EXPORT, 01 30 00 00 00

Friday 29 July 2022

Nous vous proposons des Lot de fauteuils et de chaises de bureau Si intéressés, merci de nous contacter par message. Localisation : 18, rue A/ Croizat, 95100 ARGENTEUIL, Personne à contacter : DKM EXPORT DKM EXPORT, 01 30 00 00 00