![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Pro / B2B
POWSIL-59223 |
|
Property |
Value |
|
Physical Form |
Liquid state |
|
Appearance |
Clear, pale & yellowish |
|
Solid Contents (wt%) |
55.0-58.0 |
|
Viscosity (25°C, cps) |
<1000</p> |
|
pH (25°C) |
4.0-6.0 |
|
Flash Point(°C, Open) |
>100 |
|
Diluents |
Water |
|
Gravity(25°C) |
0.993 |
|
Ionic |
Slightly cationic |
Application
POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process.
Micro-emulsion for 30.0% of POWSIL-59223
Formulation:
|
POWSIL-59223: |
30% |
|
Water: |
70% |
Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.
POWSIL-59223 can be used as received or pre-diluted with water before applying.
Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.
Pad-dry-cure process
|
Dosage: |
10~20g/L for light fabric or 25-50g/L for heavy fabric |
|
pH: |
5.0 ~ 7.0 |
|
Temp.: |
Ambient temperature |
|
Dry/Cure: |
120-170 ºC for1-3min |
Exhaustion process
|
Dosage: |
1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel |
|
Liquor ratio: |
1/10-1/20 |
|
pH: |
5.0 -7.0 |
|
Temp.: |
Ambient temperature |
|
Time: |
10-30 min |
|
Spinning & Drying: |
100 ~ 170 ºC for 1-3 min |
Garment washing process
|
Dosage: |
1.0 -3.0% on the weight of garment |
|
Temp.: |
Ambient temperature |
|
Time: |
30 ~ 60 min |
|
Spinning & Drying: |
100-130 ºC for 3-5 min |
Stripping:
POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows:
|
NaOH: |
5g/L |
|
LABS (30%): |
2-5% |
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.
Packing and Storage
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
As a silicone producer, we will offer high quality products to you.
Bonne affaire : acheter au vendeur
|
Cette page concerne les importateurs et exportateurs de POWSIL-59223 Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : powsil |
Wednesday 17 February 2016
Quantité : 1000MT - Prix : $1200/MT/ CIF
- Description - PTT dried fruit are 100% freeze-dried fruit, nothing else is added. Absolutely NO additives or preservatives - a natural, healthy, delicious fruit snack made from real fruit and packed with the same nutrition as fresh fruit. Our freeze dried fruit are perfectly...
Tuesday 16 June 2015
Quantité : 10000m2/we - Prix : USD 80-90/m2
Woven Middle Speed Corrugator Belt Woven High Speed Corrugator Belt was developed to high speed running and rapid dying of the corrugat ed board.the structure and the quality of the belt facilitates steam evaporation from the paperboard .The surface of the belt is twill weave to...
Sunday 06 October 2013
Quantité : 1 set - Prix : USD125,000
Product parameters: Parameters EW4700-S12-P10 (Complete Vehicle) Chassis Brand Foton Aumak External 8310mm x 2175mm x 3750mm Power Cummins Curb weight 3700KGS Emission standards Euro IV Total Weight 14495KGS Seat One and half row A 1995 Wheelbase 4700mm Hydraulic Lifting...