Chine (Rép. pop) Pro / B2B
Pro / B2B

POWSIL-59223

Quantité : 1000Kgs   Prix : USD1~2000/Kg

POWSIL-59223 is an innovative textile softener, especially designed to deliver a hydrophilic, voluminous and silky natural hand feel to most types of fabrics at lower use level than traditional silicone softeners.

It provides fast & consistent hydrophilicity and high ability of fabric to rapidly absorb & retain liquid water of water absorption to most types of textile fiber or silicone fabric, especially for terry towel, which cannot be obtained with traditional silicone or fatty acid based softeners. It is very stable in ordinary textile finish process without causing oil-spots on fabric.

Technical Data

Property

Value

Physical Form

Liquid state

Appearance

Clear, pale & yellowish

Solid Contents (wt%)

55.0-58.0

Viscosity (25°C, cps)

<1000</p>

pH (25°C)

4.0-6.0

Flash Point(°C, Open)

>100

Diluents

Water

Gravity(25°C)

0.993

Ionic

Slightly cationic

Application

POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process.

Micro-emulsion for 30.0% of POWSIL-59223

Formulation:

POWSIL-59223:

30%

Water:

70%

Procedures:

Charge water into a tank and start to stir;

Add POWSIL-59223 gradually under stirring;

Continue to stir for 5-10 min after all addition;

Clear micro-emulsion will be obtained at end of this procedure.

POWSIL-59223 can be used as received or pre-diluted with water before applying.

Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.

Pad-dry-cure process

Dosage:

10~20g/L for light fabric or 25-50g/L for heavy fabric

pH:

5.0 ~ 7.0

Temp.:

Ambient temperature

Dry/Cure:

120-170 ºC for1-3min

Exhaustion process

Dosage:

1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel

Liquor ratio:

1/10-1/20

pH:

5.0 -7.0

Temp.:

Ambient temperature

Time:

10-30 min

Spinning & Drying:

100 ~ 170 ºC for 1-3 min

Garment washing process

Dosage:

1.0 -3.0% on the weight of garment

Temp.:

Ambient temperature

Time:

30 ~ 60 min

Spinning & Drying:

100-130 ºC for 3-5 min

Stripping:

POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows:

NaOH:

5g/L

LABS (30%):

2-5%

Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.

Packing and Storage

To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.

As a silicone producer, we will offer high quality products to you.

Localisation : Room 703, Tower A, KangYuan ZhiHuiGang, No.50 Jialingjiang East Street, Nanjing, China, 210000 nanjing,
Personne à contacter : Amy Wu, 025 58599930

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
POWSIL-59223

Rechercher dans la catégorie : Pro / B2B
Rechercher dans la catégorie :
powsil
Fouta originale en coton pur de qualité

Vendredi 03 mai 2024

Quantité : 10000 - Prix : 000 eur

- Fouta Tunisienne originelle de haute qualité - - La fouta de Selekta - La fouta de hammam selekta , nouvelle mode sur les plages, fait des ravages. Enfin vous ne pourrez plus vous en passer ! La serviette de plage comme connue auparavant, est démodée, trop lourde est définitivement...

http://www.facebook.com/selektapro

  • seleka
  • 4027 - Sousse
  • +21 6 73 23 29 59
  • +21 6 98 20 81 34
Maroc 81000 Alimentaire
photo non disponible

Samedi 16 février 2013

Quantité : sur comand - Prix : à négocier

Notre unité de traitement des produits de la mer destinés à la congélation se trouve au sous-sol de notre établissement, déjà agréée pour le traitement du poisson frais, situé dans la zone extra portuaire de tantan port, au maroc. - Superficie totale de 630 m2. - Approvisionnement...

FRIGO BOUCHTA

  • 81000 - TANTAN PORT
  • 00212627520977
Automatic Gear Pump Liquid Filling Machine FP-465

Jeudi 02 mai 2024

Automatic Gear Pump Liquid Filling Machine FP-465 is designed and engineered to produce outstanding quality and precision filling suitable for various products like shampoo, hot sauce, lubricant oil etc. FP-465 can also replace piston or peristaltic module for the flexibility of filling demands...

Autopack Co.,Ltd