![]() |
|||||||||||||||
|
Bâtiment
SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber |
|
Name |
SD-05535 |
|
Type |
Glued |
|
Diameter |
0.55mm |
|
Length |
35mm |
|
L/D(length/diameter) |
64 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
Easier operation and improve structural strength;
High toughness and lower thickness and reduce steel reinforcement requirements;
Improve impact and abrasion resistance;
Less time used, and more economical;
Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.
Steel High Performance Fibres USER'S GUIDANCE
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
Star Smith is one of professional concrete fiber suppliers that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
If you want to know more about steel fiber price, please contact us.
Bonne affaire : acheter au vendeur
|
Cette page concerne les importateurs et exportateurs de SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber Rechercher dans la catégorie : Bâtiment Rechercher dans la catégorie : 55mm, 35mm, glued, steel, length, diameter, fiber |
Thursday 06 August 2015
Quantité : 30 sets
Manual type & CNC Drilling EDM profession manufacturer. Drilling capacity dia. is fromФ0.1mm to Ф6.0mm. High verticality (deviation) is lower than 0.03. Inbuilt water filtration system and pure water available. Ion Exchange Resin Treatment Filter support more machines and...
Sunday 17 March 2013
Quantité : Par Contai - Prix : $ 30.000
Bonjour, On a producteur des ustensiles de cuisine en inox{304, 18chr/10nick} en Turquie depuis 40 ans et nos produits sont haute qualité. On fait specialement d'exportation. on travaille avec plusieurs pays. on produit des casseroles, poeles, marmites, autocuiseurs, cocotte minute...
Tuesday 23 December 2025
Tabletop Piston Liquid Filling Machine FP-100 is the best candidate with the consideration of budget. The volumetric piston filler draws liquids and other low viscosity products such as oils or juices directly from a tank or drum It is the simple design, low failure rate and fully...