Wood crushing machine

Wood crusher Introduction
This wood crusher is an advanced fine crushing equipment to process raw and fresh wood with size less than 200mm (diameter). After crushed, the output size can reach diameter 3~5mm, which is suitable for further briquetting, drying, pelletizing. The wood crusher can also crush round logs into sawdust, widely used in biomass fuel and papermaking industry.
Wood Crusher Features
1. To ensure security, the feed inlet of this crushing equipment adopts self-section design to avoid serious damage to operators.
2. The Wood crusher is safe, endurable and efficient.
3. Highly eco-friendly and energy-saving.
4. Combining both chipping and crushing in one machine, so there is no need to use wood chipper for pre-processing of wood logs. The output by this machine is sawdust which can be further made as wood pellets.
Wood Crusher Working Principle
Wood crusher uses blades to cut and high speed airflow to reduce the wood into sawdust and particles with different fineness. In the process of cutting and crushing, the rotor rotates with the cutting direction of blade, generating high speed airflow. The materials accelerate and impact repeatedly with the high speed airflow. In this way, the crushing ratio of sawdust can be increased.
Wood Crusher Application
Wood crusher set cutting and smashing as a whole, can smash logs with 1—400 mm in diameter. Also it can be used to smash fiber stalk materials including bamboo, thatch, cornstalk, sorghum stalk etc.
Wood Crusher Maintenance
1. The bearings should be injected oil after the machine working for three to four hours.
2. Adjust the tightness of v belt after using for a period, lower 6—10mm is suitable.
3. Clean and examine carefully of every part of the machine, if there is any malfunction, repair in time.
Wood Crusher Specifications