AXIAL - 1236 Annonces

Samedi 06 mai 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

Spindle bearings are single row angular contact ball bearings which are designed for the highest speeds and highest load ratings. They support thrust loads in one direction, and at very high speeds can simultaneously absorb high radial forces and single direction axial forces by high...

Samedi 06 mai 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

Four point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported (Load ratio). The bearings are separable, i.e. the outer...

Samedi 06 mai 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

Low Noise, Acceptable Running Sound The use of the ball cage eliminates the collision noise between the balls. Additionally, as balls are picked up in the tangential direction, the collision noise from the ball circulation has also been eliminated. Long-term Maintenance-free Operation...

Samedi 06 mai 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

The design of VXO double angular contact ball bearings corresponds to two single row angular contact ball bearings arranged back-to-back. Features of double row angular contact ball bearing skf Less axial space Can be used for applications where two single row angular contact ball...

Samedi 06 mai 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

Compared with ball bearings, miniature cylindrical roller bearings have higher radial load capacity. The design of cylindrical rolling elements also allows cam roller bearings to accept relatively faster speeds than other forms of roller bearings. High speed cylindrical roller bearings...

Samedi 06 mai 2023

Prix : 100USD

As one important part of the packaging test, the transport simulation vibration testing machine is to simulate the transport vibration environment in the laboratory, to evaluate the behavior of packaging with content when subjected to vibration or shock relative to the distribution cycle...

Samedi 06 mai 2023

Prix : 100USD

The traditional shock test (also known as the classic shock test) mainly simulates the actual shock environment by the shock effect produced by a simple pulse. This method has great limitations, there is a trend to be replaced by shock response spectrum (SRS) standard srs test....

Samedi 06 mai 2023

Prix : 100USD

Multi axial simulation table (MAST) simulates the vibration of real-world environments in the laboratory. Element provides multi-axial vibration testing for a full range of vehicle components and assemblies, delivering the data that automotive engineers need to develop safer, more reliable...

Samedi 06 mai 2023

Prix : 100USD

KRD61 series 6-DOF test table is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide the user's system single 6-DOF (X, Y, Z, α, β, γ) motion of longitudinal, horizontal, vertical, roll, pitch, and heave. This multi axial...

Jeudi 27 avril 2023

Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, and is a type of polymer board that combines the excellent abrasion resistance, oil resistance, and impact resistance of PS, SAN, and BS boards. A new type of material in the fields of food...

Samedi 22 avril 2023

Quantité : 1-100,000 - Prix : $1-$10

This is the Stainless Steel CNC Lathing Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 49mm*49mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Wire cutting precision machining Whether your company is looking...

Mardi 18 avril 2023

Used for fiber butt splicing fiber or fiber splicing pigtail, this is equivalent to making a splice, and the thing used for this kind of cold splicing is called an optical fiber cold splice. Two technologies can be used for the termination of the optical cable: fusion splicing and cold splicing...

Mardi 18 avril 2023

2-Axis CNC Double Column Vertical Lathe is compatible with automatic tool change system (ATC) and ATC as well as complex machining functions. Regarding the column heightening model, there is a double sliding column system. The cross beam of 2 axis lathe can move up and down to achieve...

Jeudi 13 avril 2023

110KV oil immersed power transformers strictly designed and produced with the IEC standard and most advanced technology have great reputation and the best sell performance all over the world. 110KV Power Transformer Description This oil immersed type transformer consists of core, coil...

Jeudi 13 avril 2023

Futina wall mounted ventilation exhaust fan have 4 inches offer, 6'8'10'12' are available. PP plastic cover with black housing base, 100% copper moter provide 2 years warranty. Specification of Wall Mounted Ventilation Exhaust Fan Product name Wall Mounted Ventilation Exhaust Fan...

Samedi 08 avril 2023

Quantité : 200 - Prix : 100-5000

GNWQ series sewage cutting pump non-clogging submersible sewage water pump is suitable for 0-20 meters, large flow, medium and low head use, full head, low energy consumption. The product also adopts an easy-to-remove cutter head design, which can be replaced with different forms...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

TPOW series single-stage double suction split case centrifugal pump adopts the original and modified impeller and cutting and has the characteristics of full range, wide range and high efficiency. The single stage centrifugal horizontal split case pump can provide the operating...

Samedi 01 avril 2023

Kneading Screw Elements Manufacturer Kneading Element Diameter: φ20 mm ~φ300 mm Kneading block Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sweeping type, open longitudinally and closed laterally, which has strong conveying effect. Short...

Vendredi 24 mars 2023

Eddy current weld testing is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe...

Mercredi 22 mars 2023

Run Feng Yuan Curtain Lace Machine are raschel machines with fall plates that produce curtains, outwear and tablecloths with different jacquard pattern designs. Run Feng Yuan curtain making machine are famous for home textile applications .you can have our machines for the curtains...

Mercredi 22 mars 2023

RS1-F chopped stitch bonding machine is used to process glass fibre fabrics. The fabrics will be applied in sports equipment, automotive body and ship body, etc. The glass fibre from the creel stand is cut by a chopper device, which is behind the stitch-bonding machine(the length...)

Mercredi 22 mars 2023

Through our unremitting efforts. More and more customers have deeply realized the beauty of lace market. Lace has been applied to various occasions, from our clothes and homes to our umbrellas. Lace can be seen everywhere, and the use of lace has reached its limit. You can see all...

Mercredi 22 mars 2023

Cyclone type dust collector is a type of dust removal device. The dedusting mechanism is to make the dust-containing air flow rotate, and the dust particles are separated from the air flow and trapped on the wall by means of centrifugal force, and then the dust particles are dropped...

Samedi 18 mars 2023

The galvanometer scanner laser using photoelectric sensor as feedback system is characterized by high repetition accuracy and linearity, and high cost performance. Mirror coating film selection is rich, UV, green light, optical fiber, CO2 and other coating options, strict lens quality...

Mardi 14 mars 2023

Quantité : 150,000 pc - Prix : ≥$50USD

The standard refers to the American ASTM or ASME standard with new and unique technical clauses added, which is suitable for a type of petrochemical fasteners used in high temperature and high-pressure environments, including bolts, studs, nuts, etc. The mechanical properties and...

Mardi 14 mars 2023

Quantité : 10,000pcs/ - Prix : unit price $15-20

The standard refers to the American ASTM or ASME standard with new and unique technical clauses added, which is suitable for a type of petrochemical fasteners used in high temperature and high-pressure environments, including bolts, studs, nuts, etc. The mechanical properties and...

Samedi 04 mars 2023

Quantité : 10000 - Prix : 4-10000USD

Adopt high-precision metal seal. The metal seal consists of a pair of well-designed and processed metal seal rings as the axial dynamic seal of the bearing, and two highly elastic rubber energy supply rings are respectively located in the tooth palm and roller seal areas as static seals...

Vendredi 03 mars 2023

Quantité : 5000 Sets/ - Prix : US $10-500/ Piece

Water is among the world's most essential natural resources. Just as it aids in the development of human life and agricultural products, water is utilized to support various industrial processes such as heating, cooling, and sterilization. Transportation, management and treatment...

Vendredi 03 mars 2023

Prix : 0.1-200USD

A bronze check high temp check valve is a type of automatic valve. The valve disc is pushed by the pressure of the flowing media in the pipeline to close and open the valve. The check valve disc closes when the medium stops flowing, and it can be effective. Preventing the medium in...

Mercredi 01 mars 2023

Prix : 1000-6000USD

A centrifugal mud pump is a pump that delivers liquid by centrifugal force generated when the impeller rotates. Structural Features of Centrifugal Pumps: In a volute-shaped pump casing, an impeller that can rotate rapidly is installed, and there are 2 to 8 blades on the impeller....