COMBUSTION - 567 Annonces

Saturday 04 November 2017

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0...)

Saturday 04 November 2017

This device is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed. The device is mainly used in the field of medical protection...

Saturday 04 November 2017

Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials and...

Friday 27 October 2017

Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional equip-ment...

Friday 27 October 2017

Introduction: The high temperature oxygen index tester is designed and de-veloped according to ISO4589-3 (Elevated-temperature test) and British Naval Engi-neering Standard NES 715. Based on the general intelligent oxygen index instrument,the high temperature oxygen index tester...

Friday 27 October 2017

Introduction: Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional...

Friday 27 October 2017

Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision...

Friday 27 October 2017

Building material decomposition smoke density testing machine for the stability of the material smoke smoke toxic hazard classification, does not apply to non-stable smoke smoke toxic hazard classification. Standards compliant: GB / T20285-2006 "Hazardous Classification of Tobacco...

Friday 27 October 2017

Fire retardant coating test machine is composed of two parts: the main control box and the burning box. It is used in the laboratory condition to detect the flame propagation performance of the fireproof coating applied to the surface of the combustible substrate. Standards compliant...

Wednesday 18 October 2017

Self Operated Pressure regulating Valve Introduction GAZZC, GAZZV series self operated difference (little) Pressure Control Regulating valve Can be used in nominal pressure PN0.1 , PN10. The difference (little ) presses the regulation of segmenting. From 50mm.WC to 0.1MPa. self operated...

Tuesday 17 October 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Tuesday 17 October 2017

Smoke Density Tester for Building Materials Smoke Density Tester for Building Materials main purpose: Building smoke density tester, plastic smoke density tester is with built-in burning lamp, and by the smoke box into a 45 ° angle, for the determination of building materials, solid...

Tuesday 17 October 2017

Sample Test Furnace by Fire Retardant Coating Standard: GB/T 12441-2005 Sample test furnace by fire retardant coating main purpose: Sample test furnace for Fire proof coating, or the fire retardant coating combustion test chamber, the chamber method consists of two main parts, the...

Tuesday 10 October 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Tuesday 10 October 2017

Applications: Vertical Flammability Chamber for measuring the vertical flame spread for childrens' sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Comprises a draft free stainless steel cabinet with observation window and...

Tuesday 10 October 2017

Fabric Surface Flammability Tester Standards: GB / T 8745-2001 Textiles combustion properties of the fabric surface burning time determination, ISO 10047: 1993, Textile fabric surface burning time determination Application: Suitable for measuring the surface burning time of textile...

Saturday 23 September 2017

Sample Test Furnace by Fire Retardant Coating Standard: GB/T 12441-2005 Sample test furnace by fire retardant coating main purpose: Sample test furnace for Fire proof coating, or the fire retardant coating combustion test chamber, the chamber method consists of two main parts, the...

Saturday 23 September 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Saturday 23 September 2017

Fabric Surface Flammability Tester Standards: GB / T 8745-2001 Textiles combustion properties of the fabric surface burning time determination, ISO 10047: 1993, Textile fabric surface burning time determination Application: Suitable for measuring the surface burning time of textile...

Friday 15 September 2017

Application: For the recovery of a variety of waste black internal combustion engine oil, engine oil, the factory process oil, and other oil system replaced with a variety of lubricants,also deal with other mineral waste oil. Technical features: 1.After purification by the system...

Thursday 14 September 2017

The main purpose: Flammability Tester for Construction Materials is used to detect a variety of building materials and combustion performance measurement and control performance exterior insulation system, with touch-button design, high-voltage electronic ignition system, servo motor...

Tuesday 12 September 2017

Testing Standards: AATCC 23, BS 1006: G02, GB/T 11040 Applications: Gas Fume Chamber is used to determine the colorfastness of textiles when exposed to atmospheric oxides of nitrogen derived from the combustion of gases. Product Information: The tester consists of testing cabinet...

Tuesday 12 September 2017

Standards: 1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》 2. ISO 10047: 1993《textile fabric surface burning time measurement》 Product Information: Brand：GELLOWEN Model ：G233C Features: 1. Electric wire ignition. 2. Burner automatic timing...

Wednesday 06 September 2017

Nail Bed Flammable Tester Standards: 16 CFR1510, ASTMF963?4.6.2 Applications: The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether...

Wednesday 06 September 2017

VTEC Vertical Flammability Chamber： Testing Standards: ASTM D6413-99, DOC-FF 3/71, CALIF TB-117, GB/T 5455, CPAI-84 Applications: VTEC Vertical Flammability Chamber for measuring the vertical flame spread for childrens' sleepwear, fabrics, other textile materials or resilient filling...

Tuesday 05 September 2017

Introduction Change the boiler pipe to special pipe with magnetic force. The fuel molecules are refined so that the specific surface area of the fuel increases and promotes complete combustion. As the nature of the fuel changes, the combustion efficiency increases, so a small amount...

Tuesday 05 September 2017

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0...)

Tuesday 05 September 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Sunday 03 September 2017

DICSCL PARCS - The best and trusted choice for Diesel Fuel Injection China Lutong is one of professional enterprise engaged in diesel fuel injection system. The products are widely used in light, medium and high power diesel engines, covering automotive, engineering, marine, agricultural etc...

Friday 01 September 2017

A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such as the rate...