SHRINKAGE - 885 Annonces

Tuesday 12 April 2022

Quantité : 1200sets/y - Prix : USD10000-200000

CNC EDM combines with robot, CMM, electrode and workpiece store station, and CNC high speed milling center to realize fully automatic production. DMNC provides a complete solution, and that's the CNC wire EDM automatic spark erosion machine. ADV400 CNC EDM Machine With Automatic Working...

Tuesday 29 March 2022

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier...

Tuesday 29 March 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Tuesday 29 March 2022

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common...

Tuesday 29 March 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Saturday 26 March 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Friday 25 March 2022

What Is CMC Food Additive Sodium carboxymethyl cellulose food grade (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined...

Thursday 17 March 2022

Micro brass fibers are made of copper coated steel wire , which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel...

Thursday 17 March 2022

There are many steel fibre types . The shotcrete steel fibre for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength...

Wednesday 16 March 2022

SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min...

Saturday 12 March 2022

Plastic recycling crusher, also known as plastic granulators, plastic shredders, pulverizers, scrap machines, stripping machines. Plastic granulators can be used across a wide range of industries, including the fields of injection molding, blowing, and extruding production. It can...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Insert Mold USM molds focus on structural insert molding service, gas-assisted water-assisted molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding processing...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Thursday 10 March 2022

Prix : 1000-6000USD

Precision Mould Parts Various high-precision parts As a precision molding company, we spare no efforts to provide precision moulded components to achieve our customers' satisfaction. If you have any questions about our parker precision molding, please do not hesitate to contact us...

Wednesday 09 March 2022

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Wednesday 09 March 2022

Quantité : 100000 - Prix : 40.00-200.00 USD

Several fabrics are used for the Army uniform. Functionality, weave technic, fabric construction and other material specification will decide to uniform quality. Besides we supply whole set of military and police uniform, also we exporting many patterns fabrics by different graphic...

Thursday 24 February 2022

Low temperature test: The temperature during the test is not changed under a certain fixed temperature condition, depending on the actual use environment profile of the product and the purpose of the test. It can be a storage test or a work test. It can be natural or artificial environmental...

Sunday 20 February 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Sand casting is able to produce the part varying from several gram weight to dozens of tons, or...

Sunday 20 February 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Sunday 20 February 2022

2 component injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. two colour injection moulding consists of two different plastic materials and colors. With...

Friday 28 January 2022

We are a plastic injection manufacturer. In the spirit of a "one-stop-shop", our own tool workshop as well as an assembly and an international sales service. We have an precision injection molding process with a component load capacity of up to 2 kg in a large machine, carrying out...

Saturday 22 January 2022

Quantité : 20,000 ton - Prix : 2.4-2.9$/kg

Fortune Biotech is a professional CMC supplier, with over 40 years' experience. Having a particularly profound understanding of CMC and strong technical force, we are willing to share our technology and experience with you. Welcome to enquire! Description of Food Grade CMC Sodium...

Wednesday 12 January 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA 66 GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66GF50(A2011J) PA66 50%GF HB grade is applied to...

Wednesday 12 January 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA66 GF45 is a 45% glass fiber reinforced polyamide 6.6 with high stiffness and strength. Typical Application of PA66 GF45 (A2011I) PA66 45%GF HB grade is applied to the gear field, it requires high strength, high toughness and dynamic balance and applied to the field of sports equipment...

Wednesday 12 January 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa 6.6 gf 35, that is, 35% glass fiber is added to nylon 66. Typical Application of pa 66 gf 35(A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Wednesday 12 January 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA6 630GF is a polyamide 66 reinforced with 30% glass fibers. It demonstrates outstanding mechanical properties such as high fluidity, high toughness, high-temperature resistance and easy forming. Typical Application of PA6 6BGF30 (A1000F) The mechanical strength, creep resistance...

Saturday 01 January 2022

There are many Types of steel fibers used in concrete . The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Saturday 01 January 2022

Prix : 10-30USD

The glass fiber continuous filter cloth is composed of continuous glass fiber yarns for both warp and weft yarns. The specially processed and manufactured glass fiber fabric is an ideal high-temperature resistant filter material. The filter material has strong strength, smooth surface...

Friday 24 December 2021

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double Heads CNC RAM EDM Machine...

Saturday 18 December 2021

CNC EDM combines with robot, CMM, electrode and workpiece store station, and CNC high speed milling center to realize fully automatic production. DMNC provides a complete solution, and that's the CNC EDM automatic spark erosion machine. ADV400 CNC EDM Machine With Automatic Working...