MATERIALS - 49434 Annonces

Lundi 29 avril 2024

Pyrolysis technology offers a practical solution to recycling of used tires. The production ratio of output products depend on the original component of raw materials to make tires. 45% FUEL OIL 30% CARBON BLACK 15% STEEL WIRE 10% SYNGAS PYROLYSIS REACTOR 10ton/750kg/4000kg/5/10/15...

Lundi 29 avril 2024

China Dispersion kneader/ Rubber kneader/ Dispersion mixer，Under the hermetically closed, pressure and temperature controllable conditions, the rubber/plastics and other accessory ingredients can be successfully kneaded or plasticated with the characteristics of high production efficiency...

Lundi 29 avril 2024

Quantité : 1000 - Prix : 25USD

http://www.wetendatech.com/product-50.html ✔ AVANT-GARDE: 1 Type-C port & 3 USB-A ports to connect and charge almost all devices + it is adjustable. Move the USB Hub to any side – right or left – as preferred. Plus, the 16.9" cable allows the easier connection. ✔ MUSCULAR: Supports...

Lundi 29 avril 2024

Features of Cassava Grater Machine(Cassava Grinding Machine) Processing Capacity: 3-6Tons/hour Application Scope: Grating the cassava into the slurry Product Introduction: Cassava grater machine, cassava grating machine, cassava grinder, cassava grinding machine for cassava flour...

Lundi 29 avril 2024

Features of Cassava Paddle Washer(Potato Washing Machine) Processing Capacity: 3-20Tons/hour Application Scope: Fresh cassava washing to remove surface mud and sand Product Introduction: Cassava processing machine, cassava washing machine, cassava cleaning machine, cassava peeling machine...

Lundi 29 avril 2024

The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible and the flash dryer can dry the wet starch to the low moisture content of no more than 13% to achieve the starch storage standard. The...

Lundi 29 avril 2024

Features of Garri Processing Machinery Cassava Garri(Gari) Process Description and Flowchart: Garri is a fermented and gelatinized dry coarse flour, very popular in West Africa and a staple food in Nigeria, Ghana, Benin, and Togo. Its ability to store well and its acceptance as a...

Lundi 29 avril 2024

Features of Garri Processing Plant Garri Processing Line The automatic garri processing line is a series of cassava processing machines to make white garri(gari) or yellow garri(gari) from the fresh cassava roots. The whole set of garri production line includes the cassava washing...

Lundi 29 avril 2024

Features of Hydraulic Dewatering Press Processing Capacity: 100-500kgs/hour Application Scope: Cassava slurry dewatering Product Introduction: Hydraulic dewatering press, hydraulic press, cassava dewatering machine for cassava flour and Garri processing Load the bags directly on to...

Lundi 29 avril 2024

Features of Potato Starch Processing Plant In the field of starch processing, each person's processing conditions are different, and the types of processing equipment required are also diverse. According to the difference in capital investment, processing technology, and equipment configuration...

Lundi 29 avril 2024

Features of Potato Washing Machine Processing Capacity: 3-20Tons/hour Application Scope: Fresh cassava washing to remove surface mud and sand Product Introduction: Cassava processing machine, cassava washing machine, cassava cleaning machine, cassava peeling machine, cassava washing...

Lundi 29 avril 2024

Mainly electronic molds we make are electronic housing mold, electronic components mold, electronic dashboard cover mold, computer keyboard mould, computer mouse mould, bluetooth earphone plastic mold, power bank enclosure mold, air purifier mold, plug plastic mold, gamepad mold etc...

Lundi 29 avril 2024

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Lundi 29 avril 2024

To increase the production efficiency, we need optimize the mold cooling system to shorten the cycle time. As a result, machining cost and time will be saved and the production efficiency increased. Green Vitality concerns a lot on mold cooling system and production stability. Our...

Lundi 29 avril 2024

The family mold is used to produce injection parts for liquid filtration and flow monitoring and control systems. These accessories are customized made for Rotational Filter and Flow Limiting equipment and devices. There are two parts which are assembled together, one is hat shape...

Lundi 29 avril 2024

If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rotation, which not only seriously affects product performance, but also The lifetime will also be greatly reduced. Therefore, fan products...

Lundi 29 avril 2024

Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal parts. To produce the plastic components of consumer electronics, we need manufacture the plastic injection molds first. Consumer electronics...

Lundi 29 avril 2024

Prix : 1000usd

As consumer demands for personalization and customization continue to rise, production modes are shifting towards smaller batches with multiple varieties, making production lines more flexible. However, this shift places higher demands on the supply chain, including fine management...

Lundi 29 avril 2024

Prix : 1000usd

The diversification of order-driven production and rising labor costs are posing significant challenges to the traditional mode of warehousing logistics. In response, a robotics-based automotive warehousing solution has emerged at the case handling level. Hai Robotics has disrupted...

Lundi 29 avril 2024

sous-couverture chauffante avec systeme de regulation de temperature manuelle ou automatique suivant les besoin de l'utilisateur. faite de matiere tres douce pour le toucher et tres comfortable. specification du produit: dimension: 150x70cm Style: sous-couverture. Material: Polyester...

Lundi 29 avril 2024

Marine spark plugs are a critical component in the ignition system of marine engines, providing the spark necessary to ignite the fuel-air mixture and power the engine. As the marine industry continues to grow, the application prospects for marine spark plugs are also expanding. Here...

Lundi 29 avril 2024

PTFE polytetrafluoroethylene barrel PTFE is also known as: tetrafluoroethylene, polytetrafluoroethylene, Teflon, F4, Teflon; the tetrafluoroethylene products produced by our unit do not add recycled materials and can be used for trace analysis, isotope detection, ICP-MS/OES/AAS Analysis...

Lundi 29 avril 2024

The irrigation disposable syringe is used to clean wounds (removing dirt and debris without touching the wound), get them ready for treatment or bandaging and sped up the resume of the hurt place. Now, there exist many kings of irrigation syringes, such as curved tip irrigation syringes...

Lundi 29 avril 2024

Kohope Medical insulin injection syringes are well-engineered in technology which makes insulin injection syringes easy to handle. The integrated needle of the disposable insulin syringe is specially sealed to achieve the lowest dead space, which ensures the best performance of insulin syringes...

Lundi 29 avril 2024

Kohope medical produces different types of insulin pen needles, including retractable insulin pen needles. Our price of insulin pen needles is also competitive in the market. If you want to buy insulin pen needles in various sizes, please contact us! Introduction Of Insulin Pen Needles...

Lundi 29 avril 2024

We, as an infusion set supplier, have an excellent R&D team. For customers with R&D intentions and needs, we provide professional R&D services to cooperate with customers to overcome technical problems of emerging products. Introduction Of Infusion Sets Both infusion and...

Lundi 29 avril 2024

Hypodermic Needle for Sale The sterile disposable hypodermic syringes or disposable hypodermic needles are assembled by the barrel, plunger, piston, with/without hypodermic needle, which can be classified into central nozzle type and side type according to the prick connector. Sterile...

Lundi 29 avril 2024

Kohope is a hypodermic needle factory, which has gained great progress in themarket of the sterile hypodermic needle in China. As a professional hypodermic needle company, we produce various hypodermic needle sizes for sale, including blunt hypodermic needles. If you want to buy hypodermic...

Lundi 29 avril 2024

What Is A Huber Needle? The huber needles are made up of a protective cap, needle hub, needle tube, tubing, injection site, robert clamp and so on. The huber needles for sale aim to be used to feed medicine to the device implanted in the patient's hypoderm. Kohope offers different...

Lundi 29 avril 2024

F520 Amine-Functional Aspartic Ester Resin F-520 an amine-functional aspartic ester resin, is a solvent-free coating materials and a reactive partner for polyisocyanates. It's the same model as NH1520, formulate high-solids, two-component polyurethane topcoats and solvent-free coating...