POLYAMIDE - 367 Annonces

Friday 18 July 2025

Quantité : 1kg; 25kg;

Adiponitrile is a transparent colorless to light yellow liquid, which is mainly used for the production of polyamide fiber intermediate diamine, rubber accelerator and antirust agent, also used as detergent additives, acrylonitrile, methacrylonitrile and methyl methacrylate terpolymer...

Tuesday 15 July 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Thursday 10 July 2025

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning of...

Tuesday 08 July 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Tuesday 08 July 2025

It is mainly used as a raw material for sebacic acid ester plasticizers and nylon molding resins, and can also be used as a raw material for high-temperature resistant lubricants. Its main ester products are methyl ester, isopropyl ester, butyl ester, octyl ester, nonyl ester and benzyl ester...

Tuesday 08 July 2025

Cyclohexane is mainly used to make cyclohexanol and cyclohexanone (accounting for about 90%), and further to produce adipic acid and caprolactam. They are monomers for the production of polyamide. A small amount is used as industrial and coating solvents, and is an excellent solvent for resins...

Thursday 03 July 2025

Quantité : 1kg; 25kg;

2,2-Bis[4-(4-aminophenoxy)phenyl] propane (BAPP) can be used for: (1) Preparation of polyimides. The glass transition temperature of this new polyimide is about 225-230°C. It has the typical yield of thermoplastic polymers. It has a typical thermoplastic polymer yield behaviour,...

Wednesday 02 July 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Saturday 28 June 2025

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning of...

Friday 27 June 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Wednesday 25 June 2025

Quantité : 1kg; 25kg;

It is mainly used as a raw material for sebacic acid ester plasticizers and nylon molding resins, and can also be used as a raw material for high-temperature resistant lubricants. Its main ester products are methyl ester, isopropyl ester, butyl ester, octyl ester, nonyl ester and benzyl ester...

Wednesday 25 June 2025

Quantité : 1kg; 25kg;

Cyclohexane is mainly used to make cyclohexanol and cyclohexanone (accounting for about 90%), and further to produce adipic acid and caprolactam. They are monomers for the production of polyamide. A small amount is used as industrial and coating solvents, and is an excellent solvent for resins...

Tuesday 24 June 2025

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning of...

Friday 13 June 2025

2,2-Bis[4-(4-aminophenoxy)phenyl] propane (BAPP) can be used for: (1) Preparation of polyimides. The glass transition temperature of this new polyimide is about 225-230°C. It has the typical yield of thermoplastic polymers. It has a typical thermoplastic polymer yield behaviour,...

Tuesday 10 June 2025

Quantité : 1kg; 25kg;

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning of...

Tuesday 10 June 2025

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning of...

Saturday 07 June 2025

Adiponitrile is a transparent colorless to light yellow liquid, which is mainly used for the production of polyamide fiber intermediate diamine, rubber accelerator and antirust agent, also used as detergent additives, acrylonitrile, methacrylonitrile and methyl methacrylate terpolymer...

Saturday 07 June 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Friday 06 June 2025

Quantité : 1kg; 25kg;

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, ether. It is obtained by bromination and condensation of phenylacetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in treatment of respiratory...

Thursday 05 June 2025

Adiponitrile is a transparent colorless to light yellow liquid, which is mainly used for the production of polyamide fiber intermediate diamine, rubber accelerator and antirust agent, also used as detergent additives, acrylonitrile, methacrylonitrile and methyl methacrylate terpolymer...

Tuesday 20 May 2025

N,N-Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning...

Thursday 15 May 2025

Diphenylacetonitrile is a white to creamy or faint yellow crystalline powder, Soluble in ethanol, and ether. It is obtained by bromination and condensation of phenyl acetonitrile. Diphenylacetonitrile is mainly used as an intermediate to manufacture API which deals in the treatment...

Wednesday 14 May 2025

2,2-Bis[4-(4-aminophenoxy)phenyl] propane (BAPP) can be used for: (1) Preparation of polyimides. The glass transition temperature of this new polyimide is about 225-230°C. It has the typical yield of thermoplastic polymers. It has a typical thermoplastic polymer yield behaviour, which...

Tuesday 29 April 2025

Quantité : 9999 - Prix : 1,00 €

2,2-Bis[4-(4-aminophenoxy)phenyl] propane (BAPP) can be used for: (1) Preparation of polyimides. The glass transition temperature of this new polyimide is about 225-230°C. It has the typical yield of thermoplastic polymers. It has a typical thermoplastic polymer yield behaviour,...

Thursday 24 April 2025

Adiponitrile is a transparent colorless to light yellow liquid, which is mainly used for the production of polyamide fiber intermediate diamine, rubber accelerator and antirust agent, also used as detergent additives, acrylonitrile, methacrylonitrile and methyl methacrylate terpolymer...

Thursday 24 April 2025

It is mainly used as a raw material for sebacic acid ester plasticizers and nylon molding resins, and can also be used as a raw material for high-temperature resistant lubricants. Its main ester products are methyl ester, isopropyl ester, butyl ester, octyl ester, nonyl ester and benzyl ester...

Thursday 24 April 2025

Cyclohexane is mainly used to make cyclohexanol and cyclohexanone (accounting for about 90%), and further to produce adipic acid and caprolactam. They are monomers for the production of polyamide. A small amount is used as industrial and coating solvents, and is an excellent solvent for resins...

Tuesday 22 April 2025

It is mainly used as a raw material for sebacic acid ester plasticizers and nylon molding resins, and can also be used as a raw material for high-temperature resistant lubricants. Its main ester products are methyl ester, isopropyl ester, butyl ester, octyl ester, nonyl ester and benzyl ester...

Tuesday 22 April 2025

Cyclohexane is mainly used to make cyclohexanol and cyclohexanone (accounting for about 90%), and further to produce adipic acid and caprolactam. They are monomers for the production of polyamide. A small amount is used as industrial and coating solvents, and is an excellent solvent for resins...

Thursday 17 April 2025

Dimethylformamide is referred to as DMF. It is a compound formed by replacing the hydroxyl group of formic acid with dimethylamine. It is a good solvent for many polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide, etc. It can be used for wet spinning...