FLANGE - 1867 Annonces

Mercredi 20 avril 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small fluid resistance Completely Automatic Operation Pump Control Valve Working Principle When the pump is started, the solenoid pilot valve is fully opened...

Mercredi 20 avril 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of Pressure Relief Valve Accurate Pressure Control Fast Opening to Maintain Line Pressure Slow Closing to Prevents Surges Completely Automatic Operation Pressure Relief Valve Working Principle Inlet pressure water enters the lower cavity of the pilot valve diaphragm from...

Mercredi 20 avril 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of pressure reducing valves for fire protection service Sensitive and accurate pressure control Adjustable static pressure and dynamic pressure Outlet pressure does not fluctuate with inlet pressure Full port, small fluid resistance Fire Pressure Reducing Valve Working Principle...

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

UTST E-2 OTR Tire 14.00 r24|14.00R25|16.00R25 UTST is a crane tyres tread pattern and is designed to be suitable for both on-highway and off-highway uses. UTST is engineered with tough architecture and a versatile tread to meet the needs of cranes and to reach a balance of good traction...

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

UTPT IND-5 OTR Tire 12.00 r 24|14.00R24|18.00R25 UTPT is a telehandler tires pattern designed with reinforced architecture, improved heat dissipation and wear resistance for port handling equipment that requires the tires to go through thousands of round trips over abrasive surfaces each day...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Beading Machine for Sale Line 5/ line 7 pipe beading machines are used to make reinforced ribs in the duct area, and it can output 5 or 7 reinforced ribs at one time. Customer can customize multiple-line duct beader machine according to different requirements. Beading Machine Performance...

Mercredi 13 avril 2022

Prix : 1000-50000USD

It's mainly for uncoiling, leveling, beading, punching, locking, bilaterally angle steel or TDF flange forming. Because of its small space requirement and easy to install and operate, people also call it "small line 5". Auto Duct Production Line 4 Performance Features: The function...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Duct production line 3 can drive blanking for duct. Meantime, it's very suitable for diversified production like TDF/angle steel/inserted flange forming; the angle steel flange and inserted flange can be bent into square-shaped pipe automatically. Performance features of Auto Duct...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Air Duct Machine for Sale Duct production line 2 can drive blanking for duct and TDF flange forming machine at the same time.Combined with TDF flange forming machine, rolling reel machine, crimping machine and relevant comer code, duct production line 2 can produce high-quality products...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Description of auto line duct machine Cnc air duct line is a duct making line with the highest automation and highest efficiency in rectangular air duct production line machines. The air duct production line machine made by BLKMA company can help customers to finish all needed...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Angle Rolling Machine for Sale It's used for rounding angle steel flange and 40Cr steel with overall heat treatment which makes the machine more durable. Angle Steel Round Rolling Machine Performance Features: Model Lield limit(mm) Min diameter(mm) Max capacity(mm) Power(kw)...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Portable angle steel flange production line is mainly for punching and cutting duct angle steel flange(30-50 angle steel). Cutter and punching die are both made of Japan SKH51, which are fast and accurate. The new design mold can complete the angle steel switching within 5 seconds...

Mardi 12 avril 2022

Jinggong can produce various kinds of steel frame machine to match customer's requirements and develop the technology continuously. The main steel structure machine are as following: corrugated web H-beam welding line, cut to length line and slitting line, H-beam welding line, steel...

Mardi 12 avril 2022

H beam machine consists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can reach...

Mardi 12 avril 2022

H-Beam Straightening Machine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will have a strong straightening force and large straightening range and with high working efficiency and good quality. We can design and manufacture...

Mardi 12 avril 2022

The clamping and alignment of the web plate and flange plate will be done in H- beam assembly machine, there also have automatic tack-welding. Jinggong H beam assembly machine consists of an alignment system, conveyor rolls, hydraulic and electrical systems, etc. The upper pinch roller...

Mardi 12 avril 2022

The gantry welding machine can replace the cantilever submerged gantry weldingmachine, and can choose unipolar or multipolar welding, the landfill high efficiency. Also according to different customer requirements, specifically for the "H" or "T" type steel to design the replaceable...

Mardi 12 avril 2022

The corrugated web beam automatic welding machine adopts the welding robot originally from Italy which automatically controls the works such as the whole Line laser scanning, two positions welding, welding gun changing, crosssection cutting and so on. This machine has the features...

Jeudi 07 avril 2022

Overview of C & U Channel Roll Forming Machine Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It consists of a wide "web" and two "flanges". The flanges could be parallel or tapered. C/U channels are widely used in many applications,...

Jeudi 07 avril 2022

Skytech Rolling Mills is India, Mumbai based company, a leading manufacturer and supplier of round bars, hex bars, flat bars, bright bars, square bars, angles and flanges, check www.skytechrollingmill.com for more company and product details Localisation : Survey no.473,479,481 At...

Dimanche 03 avril 2022

With additional washing functions, vertical peeler centrifuge has a better cleaning effect. A pneumatically assisted scraper is adopted to remove the remnant filter cake and the CIP system is optional to secure clarity to be in accordance with GMP Norm. A frequency control system...

Dimanche 03 avril 2022

Industrial centrifugal filter is the pressurization rotary drum filter, integrating washing, extracting, evaporating, and drying is a piece of closed equipment that realizes solid-liquid separation after continuously and automatically retaining the solid granules in the liquid and...

Jeudi 31 mars 2022

110KV oil immersed power transformers strictly designed and produced with the IEC standard and most advanced technology have great reputation and the best sell performance all over the world. 110kv Power Transformer Description The oil immersed power transformer consists of core, coil...

Mercredi 30 mars 2022

Techno Pipe and Fittings is an ISO 9001: 2008 accredited company, manufacture and supplies industrial products in almost all ferrous and non-ferrous materials, some of the prominent products are pipe fittings, flanges & butt weld fittings. Visit technopipefittings.com for more...

Samedi 26 mars 2022

Quantité : 100SET/MON - Prix : USD1000-USD150000

Model No.: VWSC-1600 Style: Verical Thickness Range: 0.4-1.2mm Duct Length: 1200-1550mm Speed: 24m/min(78 FPM) Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Vertical duct seam closing machine Products Information...

Jeudi 24 mars 2022

Quantité : 100SET/MON - Prix : USD1000-USD150000

Model No.: T20,LT20 Max Thickness: 0.8mm/21ga "a"Size: 20±0.5 Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C TTF/LT Mate Flange Forming Machine Products Information TTF/LT mate flange has well seal,strong and...

Jeudi 24 mars 2022

Quantité : 100SET/MON - Prix : USD1000-USD150000

Model No.: T-12-34,T-15-34 Thickness Range: 0.5-1.2(18-25ga),1.0-1.5(16-19ga) Speed: 8m/min(26FPM) Roller stations: 15 Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C TDF Flange Forming Machine Products Information...

Mercredi 23 mars 2022

Bourdon tube pressure gauge are devices for measuring pressure that is widely used in various circumstances to measure the pressure of the gas and liquid medium with high precision and easy reading advantages. Diaphram devices can be added to assist the pressure measurement of the...

Mercredi 16 mars 2022

Prix : 10-30USD

ANSI 150 flange, the standard flange with pressure grade CLASS150 (150LB), is the most widely used pressure flange in practice, its relevant flange size requirements and technical parameters are stipulated in flange standards ASME B16.5 and ASME B16.47 and BS3293. ANSI 150 Flange...

Mercredi 16 mars 2022

Prix : 10-30USD

A foot valve is composed of the valve body, valve cover, valve disc, sealing ring, and gasket, etc. A foot valve is a type of check valve that is typically installed at the bottom of Pump suction line, used to prevent water emptying from suction lines after shut down to prevent water...