D′EXTRUSION - 1579 Annonces

Thursday 21 April 2022

Quantité : 2000sets/m - Prix : 200USD-800USD

Hygienic fire doors is also known as clean room door which is corrosion-resistant, easy to clean and easy to install. The door frame width is adjustable. The power beam is an aluminum extrusion with a service life of over 1 million times. This Door system is widely applied to hospitals...

Wednesday 20 April 2022

Quantité : more than - Prix : 3000-6500 euro per M

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Wednesday 20 April 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Brief introduction of isotropic rubber magnet(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic...

Tuesday 19 April 2022

Prix : 1000-6000USD

Honeycomb carton box, honeycomb boxes are made of honeycomb cardboard by stamping, cutting and pasting. Paper edge protector is pasted at the interface of cardboard to strengthen. According to the actual demand can be designed into the integral type, combined type (detachable), integrated...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

( WIDTH ) 700-2000MM ( THICKNESS ) 0.5-15MM Polyethylene foamed sheet ( film ), also named as pearl cotton. Performance & Advantages of EPE Foamed Sheet / Film Production Line With the features of dampproof, shock proofing, sound insulation, heat preservation and good plasticity...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Compared with the knife-up cutting machine, it has obvious advantages, no chips, no noise, low power, energy saving, no waste of raw materials, low cost and manual processing of burrs. It is the first choice for the upgrading of merchants' cutting equipment. The cut end of the pipe...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

The production equipment of mask melting and spraying cloth adopts special clothes rack type and gas equalizing spinning die head, and the melt is evenly distributed. Applications in the field of air purification: used in air purifiers, as air filter elements and for coarse and medium...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

What is the Meaning of Auxiliary Equipment？ Plastic auxiliary equipment covers a wide range, from batch raw material processing and storage to mixing and metering, to the drying, packaging, storage and transportation of finished products. It is related to the operating efficiency...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

1. Four rounds of vertical design, small size, easy to move; 2. With cycloid reducer motor; 3. Low noise and durablility; 4. A short time to complete the uniform mix; 5. Low energy consumption, high efficiency; 6. Bottom lid, barrel bottom-weight moulding, with precision, more durable; 7...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling. In the processing of raw materials...

Saturday 16 April 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Plastic extrusion is defined as a manufacturing process (high-volume), in which the raw plastic / raw plastic material is melted and then formed in a continuous profile. With this process, various products can be manufactured such as pipe/tubing, window frames, weather stripping, wire insulation...

Thursday 07 April 2022

ETCN is specialized in offering custom cnc machining services. As the technical cnc machining service supplier, we have various types of CNC processing equipment and testing equipment to help us control the quality of cnc machining metal. We can manufacture parts of various materials...

Tuesday 29 March 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Tuesday 29 March 2022

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and applied over 30 years world wide. The main principle of this technic is to perform a strong stir during the metal phase change from liquid to solid...

Saturday 26 March 2022

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight, to reduce energy...

Friday 25 March 2022

Description of cmc toothpaste grade The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional and healthy...

Friday 18 March 2022

Aircraft Atlas Aluminum Oven Rack Specifications Title： Atlas KSSU aluminum alloy airline oven insert galley oven rack Product Name： airline oven rack, oven insert Application: For airline flight attendants use, food carrier Material： Aluminum alloy Size： 387*225*414 mm Weight: 2...

Tuesday 15 March 2022

Quantité : 100000TON - Prix : 2300USD/TON-3000USD/

6063 Aluminum Sheet Aluminum 6063 sheet/6063 sheet is an aluminum alloy with magnesium and silicon as alloying elements. 6063 aluminum sheet usually has good mechanical properties and can be heat treated and welded. The comprehensive performance requirements of aluminum alloy are...

Saturday 12 March 2022

Are you in the market for a new moulding plastic machine but just not sure how or where to start? It is more complicated than ever before with what seems to be an endless variety of types and brands of machines to choose from; hydraulic, electric, hybrid, high or low clamp tonnage...

Saturday 12 March 2022

Plastic recycling crusher, also known as plastic granulators, plastic shredders, pulverizers, scrap machines, stripping machines. Plastic granulators can be used across a wide range of industries, including the fields of injection molding, blowing, and extruding production. It can...

Saturday 12 March 2022

As one of plastic mixer machine manufacturers, SOXI provides a wide range of plastic color mixer such as gravimetric blenders, volumetric dosers, horizontal mixers, and vertical color mixers. High speed mixer for pvc compounding is used for the precision proportioning of multi-types...

Saturday 12 March 2022

Mold temp controller, MTC, mold heater, In a broad sense, called temperature control equipment, oil/water mold heaters. Mold temp controller contains heating and freezing temperature control. it is used to heat up the mould and maintain temperature. Soxi provides a wide range of mold...

Saturday 12 March 2022

Prix : 100USD

Matching up with the requirements of our clients, PACE customizes 24v deep cycle lithium battery pack at different capacities for AGV, robot, and other applications. PACE offers custom-made lithium-ion battery packs according to your requirements. If you want to customize your 24v...

Thursday 10 March 2022

Similar to the application scope of the aluminum flat bar, the aluminium rod square can be widely applied in construction, machinery, electronics, sports equipment, advertising, transportation, consumer goods, furniture, aviation, military, and other applications. In Otalum, we offer...

Thursday 10 March 2022

Otalum stocks a wide range of extruded aluminium heat sinks and provide heatsink extruded aluminium profile to custom designs, available in a range of finishes. If the existing products are not suitable for your needs, our technical team can help you to design your products and realize them...

Thursday 10 March 2022

Aluminium formwork is a construction system for casting the concrete structure of a building. The lightweight aluminium panels and simple installation deliver greater efficiency on the site. Otalum's aluminium column and shuttering formworks are suited for many different types of structures...

Thursday 10 March 2022

The equal angle aluminum is an important type of aluminium L angle with legs of equal lengths and equal thickness. In Otalum, we offer a wide range of aluminium equal angle with a variety of alloys, sizes and finishes. It can be cut to aluminium equal angle sizes if the existing products...

Thursday 10 March 2022

Aluminium curtain wall profile is a thin and lightweight wall system used for high-rise buildings. It is normally composed of aluminium and glass. As a professional aluminum curtain wall suppliers, Otalum sells various high-quality curtain wall products, and our products have already...

Thursday 10 March 2022

Otalum produces a large number of architectural aluminium profiles also known as aluminum construction profiles, used for building and construction areas such as window and doors, curtain walls, fencing and handrail, louvre and walkway covers. These construction aluminium profiles...

Thursday 10 March 2022

Otalum is one of the leading aluminium window extrusions suppliers of customed aluminium profile products in Southeast-China, Australia, South America and Southeast-Asia, offering a wide range of production capacities in aluminium extrusions, finishing and fabrication. Aluminium is...