（PTFE - 1079 Annonces

Saturday 03 February 2018

Pot bearing is designed for bearing the combinations of vertical loads, horizontal loads, longitudinal and transverse movements and rotations. According to the bearing performance, it can be divided into fixed pot bearing, free sliding pot bearing and guide sliding pot bearing (edge...)

Saturday 03 February 2018

PTFE bearing pad is the dimpled PTFE sheet bonded to the laminated bearing pad for structure friction coefficient reduction and displacement capacity improvement. It provides a sliding surface for expansion accommodation, the elasticity of the bearing pad is high enough to suit the...

Thursday 04 January 2018

Performance Descriptions: - Wide pleat spacing, easy-cleaning design - High filtration efficiency - Top and bottom caps have plastic covers, iron covers, EPDM and other materials - Galvanized anti-rust caps and metal frame - Rubber seal - Installation methods: Round flange, three lugs...

Thursday 04 January 2018

Performance Descriptions: - Wide pleat spacing, easy-cleaning design - Unique plastic rotation, effectively separate the pleats, protect the filter media from abrasion by inner mesh - Top open, bottom close, bottom close with deflating bolt hole - Galvanized metal - Rubber seal Applications...

Thursday 04 January 2018

Performance Descriptions： - Wide pleat spacing, easy-cleaning design - Top open,bottom open/bottom close with deflating bolt hole - Unique plastic rotation, effectively separate the pleats, protect the filter media from abrasion by inner mesh - Special flame retardant property...

Thursday 04 January 2018

Overview： Gas Turbine Air Intake Filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally the filters are made of mixture of polyester & cellulose...

Friday 08 December 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer,Rubber joint Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture...

Friday 08 December 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352...

Thursday 30 November 2017

Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352, BS5163,BS5150, ANSI B16.34, API600, API6D,API609...

Tuesday 14 November 2017

Prix : 10,00 €

Localisation : NO.6 Chuangxin 4th Road Economic Development Zone Fushun Liaoning China, 113122 Fushun, Personne à contacter : Jia Ling, 86 24 56608630

Wednesday 18 October 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Wednesday 18 October 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Wednesday 18 October 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Wednesday 18 October 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Wednesday 18 October 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Wednesday 18 October 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Wednesday 18 October 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Wednesday 18 October 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Wednesday 18 October 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Wednesday 18 October 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Wednesday 18 October 2017

Electric Three Way(3-way) Diverting Control Valve (GZDLX) Characteristics: Electric Three Way Control Valve includes Electric Three Way Mixing Control Valve (GZDLQ) and Electric Three Way Diverting Control Valve (GZDLX). Mixing Control Valve is mainly used to mix the medium from...

Wednesday 18 October 2017

Brief Introduction ZDLM Electric Actuated Sleeve Type Pressure Balanced Control Valve adopt Pressure Balanced Sleeve-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value...

Wednesday 18 October 2017

Brief Introduction ZDLP Electric Actuated Single Seat Globe Control Valve adopt top-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value. The Dis-guiding area is big....

Tuesday 05 September 2017

Features of PTFE vertical injection extruder machine 1. Produce ptfe/Teflon tube dia from 150mm to 300mm. 2. Vertical Extruder. 3. Ram vertical extruding machine. 4. Using for Pre-sintering PTFE material. 5. Suit for new PTFE material or Recycle PTFE material. Technical process Step 1...

Tuesday 05 September 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...

Thursday 29 June 2017

Mirror polishing PVC Oxygen Mask Mould Best Hope Mold & Plastic (Shanghai) Co., Ltd (BHM)is a factory in Shanghai which focus on high precision plastic Injection molds design and developing, as well as custom injection molding. BHM Services: 1. We provide mould, OEM is available...

Thursday 29 June 2017

medical connector drip chamber Urine Bag parts Mould Our factory is a leading plastic parts molds manufacturer in China. We have a lot of experiences in making excellent plastic molds. Depending on skilled workers, experienced designers, our molds are of high quality and reasonable price...

Thursday 29 June 2017

Custom Laboratory Disposable Petri Dish Product Plastic Injection Mould BHM is a leading plastic parts molds manufacturer in China. We have a lot of experiences in making excellent plastic molds. Depending on skilled workers, experienced designers, our molds are of high quality and...

Friday 16 June 2017

Principle of input hydraulic pressure level transmitter / sensor with LCD: Input type (Hydraulic pressure) liquid level transmitter adopt high performance diffused sili con piezoresistive pressure sensor as measuring element, after the high reliability of amplification circuit and...

Saturday 25 March 2017

Quantité : 100 pcs/ b - Prix : 15-50 USD/ BAG

ANPEL offers unsurpassed quality, consistency and reliablility of result to increase sample throughput while reducing thumb pressure. under designed state-of-art injection technology, syringe filter is produced for 13mm and 25mm. HPLC certification is owned for each batch. the syringe...