ANTIRUST - 111 Annonces

Friday 15 July 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

Can I Paint Asphalt Coal tar pitch is obtained by fractional distillation of coal tar. It has better water resistance and chemical resistance. It can be made into shielding paints without using pigments. By adding aluminum powder, its anti-rust performance can be enhanced. The main...

Friday 15 July 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

Asphalt aluminum ship bottom antirust paint is made of asphalt, aluminum powder, extender pigment, solvent. It has good water resistance, rust and rust resistance, and has good adhesion to the surface of the steel. It is used as anti-rust paint for ship bottom, and in good match...

Friday 15 July 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

What Is Alkyd Paint Used for? Alkyd resin paint is mainly composed of alkyd resin. It is currently the most used type of paint. It has the advantages of low price, simple application, low requirements for the applying environment, full and hard coating film, good durability and weather...

Wednesday 11 May 2022

China 3003 aluminum sheet is a typical Al-Mn antirust alloy. The addition of the alloy component Mn increases the strength slightly while maintaining the excellent workability and corrosion resistance of pure aluminum. The 3003 aluminum sheet is a non-heat-treated alloy and cannot...

Wednesday 11 May 2022

Aluminum coil 3003 is a commonly used Al-Mn antirust alloy. Similarly, the 3003 aluminum coil is also a non-heat-treated alloy, and its mechanical properties can be improved by conventional cold processing. In addition, because 3003 aluminum coil has good corrosion resistance, plus...

Thursday 07 April 2022

How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile china cold roll forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine...

Sunday 20 February 2022

Quantité : 5000-10000 - Prix : USD 1.00 to USD 500.

Brass lighting has tremendous appeal in home interiors. Embrace the unique look of brass lighting by designing brass fixtures in a traditional home for an antique interior look or a modern home for a sleek industrial atmosphere. In our collection of brass lighting fixtures, you'll...

Thursday 16 December 2021

Sorbitan esters and Polysorbates as nonionic offer many advantages over ionic surfactants including increase stability, enhance flexibility and provide wider compatibility. They are stable in mild acids, alkalis and electrolytes and do not react with ionic ingredients or actives....

Tuesday 23 November 2021

Quantité : 100000 - Prix : 800-1200$

Galvalume steel sheet is an important alloy material often used in daily life. Galvalume steel plate is composed of Al Zn alloy structure, which consists of 55% Al, 43% Zn, and 2% Si solidified at 600 ℃. The whole structure is composed of Al Fe Si Zn, forming a dense quaternary crystal...

Saturday 25 September 2021

Thick build epoxy zinc epoxy primer is an epoxy zinc-rich primer with thick coating properties. The thickness of 70μm～80μm can be reached by airless spraying at one time. The ordinary epoxy zinc-rich primer does not have the performance of the thick coating, and one spray is about 40μm...

Saturday 25 September 2021

Modified epoxy non-ferrous metal primer is formulated with a surface-tolerant agent, which will react with the rust on the substrates and form a passive film that has excellent protection to the iron and steel surfaces, with excellent physical and mechanical performances. It is used...

Saturday 25 September 2021

High-build Epoxy Coal Tar Primer is formulated with special epoxy resin, coal tar pitch paint, antirust pigment, solvents and additives. It has fast drying time, good anti-rust property, high mechanical strength, acid and alkali corrosion resistance, and is mainly used as primer...

Saturday 14 August 2021

Galvalume steel sheet is an important alloy material often used in daily life. Galvalume steel plate is composed of Al Zn alloy structure, which consists of 55% Al, 43% Zn, and 2% Si solidified at 600 ℃. The whole structure is composed of Al Fe Si Zn, forming a dense quaternary crystal...

Friday 13 August 2021

The 5754 aluminum plate is a non-heat treated Al-Mg alloy and is also an antirust aluminum sheet. 5754 aluminum properties show excellent corrosion resistance, good welding, and good machining formability. Most notably, anodizing and other surface treatments of 5754 aluminum alloy...

Saturday 31 July 2021

L'huile de bois de tung est un type de produit de finition du bois qui est dérivé de la noix pressée de l'arbre de tung. L'huile de tung est une huile siccative semblable à l'huile de lin, de carthame, de pavot et de soja. Les huiles siccatives sont parfaites pour les objets en bois...

Tuesday 20 July 2021

The RH-AUDIO Public Address Projector Speakers are made out of all metal extruded aluminum alloy enclosure with cast aluminium top and bottom plates are fully antirust, dustproof and weatherproof IP65 rated and the speaker driver units inside also are waterproof featured. Built-in...

Saturday 17 October 2020

sound column speakers The RH-AUDIO Column Speakers are slimline loudspeakers which use several vertically mounted speaker drivers to produce clear sound reproduction over a long distance with little vertical spread of sound. The indoor column speakers employ 4" full range speakers (models...)

Tuesday 22 September 2020

Quantité : 30 sets - Prix : USD10,000-USD100,000

How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile cold forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine must...

Friday 10 August 2018

Quantité : 15000 Squa - Prix : ¥25 ~ 120 / Square M

- What Is The Thickness Requirement Of Sign board Aluminum Composite Panel - The upper and lower aluminum plastic composite panel shall have a thickness of antirust aluminum not less than 0.20mm, and the total thickness shall be not less than 4mm. Fluorocarbon coating or polyester...

Monday 18 December 2017

Types: all-round shafts with hole or not, with key or not, and so on. Materials: plain carbon steel, free-cutting steel, aluminium alloy and other custom materials. Precision: Grade 6-8(Generally), Specially follow the drawing. Detail: Remove burrs, antirust oil, carton packing. Custom or not...

Wednesday 08 November 2017

Quantité : 4500 tons - Prix : 2 500,00 €

3003 aluminum coil is commonly product in the 3000 series of Al-Mn alloy. Because of the addition of manganese in the alloy, it has excellent rust resistance. Therefore, the 3003 aluminum coil is the most widely called antirust aluminum. As one of the representative products of Mingtai Aluminum...

Thursday 06 July 2017

Prix : 3,07 €

Formation du produit: La peinture à deux composants, le groupe A, est constitué par des résines acryliques supérieures, des pigments, des additifs et des solvants, et l'isocyanate comme groupe B. Caractéristiques du produit: . Le film est résistant et résistant, brillant, bonne performance...

Saturday 06 May 2017

HDPE Strength film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that the...

Saturday 06 May 2017

HDPE STrength film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that the...

Saturday 06 May 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Saturday 06 May 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Saturday 06 May 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Wednesday 29 March 2017

Quantité : 9999 - Prix : 1,89 €

Features: Finish: brass plated→nickel plated→antirust oil Have stronge anti-rusty force Longer using life High-level material adopped Type: 35-40mm cup Opening angle: 95 degrees Depth of hinge cup: 11.3MM Diameter of hinge cup: 40MM Face panel (K)measurement: 3-7MM SGS...

Tuesday 15 November 2016

Quantité : 1SET - Prix : USD4000

applicable industries: RT-302 Desktop constant temperature and humidity test chamber applied to test the products quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care .....

Tuesday 30 August 2016

Prix : 10,00 €

product attribute: specification：customer's drawingmaterial: carbon steel apply：machinery partsbrand：XinyuanCountry of Origin: China(Mainland)Casting process: precision castingstandard: ISO9001: 2008surface treatment: antirust oilweight: 0.2-0.5kgsservice: OEM ODM Website: http://www...