COEFFICIENT - 999 Annonces

Mercredi 27 mars 2024

The micro-oil screw compressor has the characteristics of reliable operation, few wearing parts, low vibration, low noise, and high efficiency. The screw oil air compressor working principle is to use the power pump or by virtue of the pressure difference generated by itself. In the...

Vendredi 22 mars 2024

Prix : $2-$150

High Accuracy Pressure Transmitter LFT2010 High accuracy pressure transmitter applies a silicon strain diaphragm embedded in an oil-filled steel housing and the repeatable & low hysteresis properties of silicon are exploited by the difference normalization digital amplifier to...

Jeudi 21 mars 2024

Prix : RMB20-100/kg

ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of polybutadiene....

Samedi 16 mars 2024

Graphite products of vacuum furnace are increasingly widely used in high temperature graphite furnace. They are not only used to manufacture heating graphite rods element and heat insulation screen of vacuum furnace, but also used to manufacture structural parts such as bracket, material tray...

Samedi 16 mars 2024

WH conductive graphite rod uses graphite block as raw material. After the processing of professional lathe equipment, it is made of different diameters and lengths. The graphite rod current graphite rod current density is a very important parameter, and you can contact us for more information...

Samedi 16 mars 2024

Prix : 1-100

SMC Auto Parts Description Auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Auto Parts Car Bumper Battery Box Enclosure...

Samedi 16 mars 2024

Quantité : 1-5000 set - Prix : USD 1,000~USD 50,000

Cooled core and uncooled core are different in many aspects, including the descriptions below. TC320MW/TC640MW TC320MW|TC640MW are mid-wave cooled thermal imaging cores with high-quality detectors which can be easily integrated into infrared systems that require extremely long distance...

Jeudi 14 mars 2024

Prix : 1000usd

TUBE & SHELL HEAT EXCHANGER China shell and tube heat exchanger. The partition wall heat exchanger is a heat transfer surface which is closed on the wall surface of the tube bundle in the casing. The heat exchanger has the advantages of simple structure, low cost, wide flow cross...

Mardi 12 mars 2024

Prix : USD1500 to USD3000

Amides, Coco, N-[3-(Dimethylamino)Propyl] CAS No. 68140-01-2 Wholesale & Bulk Cocamidopropyl Dimethylamine is a surfactant,mainly used as an antistatic agent in cosmetics and skin care products. Amides, Coco, N-[3-(Dimethylamino)Propyl ] CAS No. 68140-01-2 Basic Information Multiple Names...

Mardi 12 mars 2024

PEEK Non-standard Parts PEEK material is a new type of semi-crystalline aromatic plastic engineering plastics, with extremely good physical and mechanical properties, in many special areas can replace metals, ceramics and other traditional materials, in reducing the quality, improving...

Mardi 12 mars 2024

Nylon Non-standard Parts Nylon is a tough angular translucent or milky white crystalline resin, as engineering plastics nylon molecular weight is generally 15-30,000. Nylon has high mechanical strength, high softening point, heat resistance, low coefficient of friction, abrasion resistance...

Mardi 12 mars 2024

Teflon coated magnets are known for their excellent chemical stability, corrosion resistance, friction resistance, and heat resistance, and have developed into world-class industrial coatings. Teflon materials have also been used in the surface treatment of magnetic materials, using...

Jeudi 07 mars 2024

Quantité : 9999 - Prix : 1,00 €

Le testeur de friction et de pelage FPT-01 est un appareil polyvalent adapté à une variété d'applications. Il mesure avec précision les coefficients de frottement statiques et cinétiques sur une large gamme de matériaux, notamment les films plastiques, le caoutchouc, le papier et les tissus...

Jeudi 07 mars 2024

Quantité : 9999 - Prix : 1,00 €

Le testeur de coefficient de frottement du plan incliné évalue le coefficient de frottement statique sur divers matériaux, à l'aide d'un plan incliné réglable et d'un bloc coulissant. Il évalue le COF statique des films plastiques, des feuilles, du caoutchouc, du papier, du carton...

Jeudi 07 mars 2024

Quantité : 9999 - Prix : 1,00 €

Présentation du testeur d'efficacité de nettoyage CLEAN-EFF01, un outil polyvalent conçu pour évaluer les performances de nettoyage sur diverses surfaces et matériaux. Des environnements domestiques aux environnements industriels, ce testeur garantit des évaluations précises de produits...

Mercredi 06 mars 2024

AlNiCo Block Magnets Magget Material: AlNiCo Permanent Magnet Magnet Shape: rectangular/block Expression: L (length) x W (width) x H(height) Production Process: Casting and Sintering The Maximum Operating Temperature: 525-550 ° C Advantages: good temperature stability and anti demagnetization...

Mercredi 06 mars 2024

Quantité : 10000pcs/p - Prix : 20USD--

CNC Machining POM POM (also known as polyoxymethylene) is a synthetic thermoplastic polymer. It has a good balance between mechanical properties and cost, and is widely used in the manufacture of gears and bearings. POM has excellent wear resistance, low friction coefficient, and...

Mercredi 06 mars 2024

Quantité : 10000pcs/p - Prix : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Mercredi 06 mars 2024

Quantité : 10000pcs/p - Prix : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Mardi 05 mars 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

C44300 Copper Alloy Pipe ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY...

Mardi 05 mars 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Mardi 05 mars 2024

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H...

Mardi 05 mars 2024

Precision Titanium Machining Why is Titanium So Hard to Machine? Titanium, as a challenging material, has a unique combination of properties in terms of high strength, high temperature, chemical reactivity, and elasticity. Due to its strength and tendency to harden during processing...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

Polytetrafluoroethylene sheets are made from polytetrafluoroethylene, a synthetic fluoropolymer of tetrafluoroethylene that has remarkable chemical resistance. PTFE sheet/ plate is known for its low coefficient of friction, high impact resistance, and high-temperature resistance....

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE sealing products are made of polytetrafluoroethylene (PTFE) material that is known for its unique combination of properties, such as high chemical resistance, low coefficient of friction, and temperature resistance. PTFE sealers are widely used to create leak-proof seals with...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions. None...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene products, including tubes, sheets, rods, gaskets, and film. These PTFE products have excellent chemical and heat resistance, low friction...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Vendredi 01 mars 2024

Stone Plastic Composite (SPC) Floor Stone plastic spc composite flooring is a type of engineered luxury vinyl that combines limestone and stabilizers to create an extremely durable core. It is a popular choice for both residential and commercial applications due to its durability...

Jeudi 22 février 2024

china garnet abrasive sand is made of garnet raw materials after crushing and screening. It is an island-like structure of aluminum (calcium) silicate, which has the characteristics of high hardness, strong grinding force, acid and alkali resistance, and high-temperature resistance...