CORES - 5910 Annonces

Saturday 28 October 2023

2.5 MM Orange Flex Circular Cable 2 Core+ Earth 0.6-1kv Parameter Nomial. Area mm Strands/wire Dia No/mm Insulation Thickness mm Sheath Thickness mm Nom.O/D mm Appr weight Kg/Km 1.5 2x7/0.5+7/0.5E 0.8 1.8 10.3 152 2.5 2x7/0.67+7/0.67E 0.8 1.8 11.4 202 4 2x7/0...

Saturday 28 October 2023

Our acss wire, cable acss is mainly used in the overhead lines for electricity distribution . This conductor acss is composed of steel core reinforced core and annealed soft bare aluminum wire. Similar to but different from ACSR, the aluminum wire in ACSR is a hard drawn aluminum wire...

Saturday 28 October 2023

Aluminum clad steel core aluminum stranded wire is mainly used for overhead lines, compared with ordinary steel core aluminum stranded wire, with light weight, high load, low power loss and other advantages, and anti-corrosion performance, and maintenance is convenient, long service life...

Saturday 28 October 2023

Aluminum alloy stranded wire, aslo know as aaac sorbus conductor, is mainly used for long-distance overhead lines, but also can be used as overhead line bearing line or other cable core. Mainly ASTM B399 standard, BS EN50183 standard, BS3242 standard, IEC61089 standard, French standard...

Saturday 28 October 2023

The rubber trailing cable Connection for portable electrical equipment and machinery, including those used in hazardous areas, for reeling / nonreeling applications. It has six Cores: three individually screened phase cores, two unscreened pilot cores and one Earth continuity conductors...

Friday 27 October 2023

The main products of our new energy commercial vehicle electric motor control unit system are: main drive motor controller 3-in-1 drive motor controller (main drive + DC/DC + power distribution). We design electric commercial vehicle system solutions to meet the needs of different vehicle models...

Friday 27 October 2023

Category： Linear Roller Guideway The LMR series bearing roller guide adopts a cylindrical roller-type rolling element to replace the traditional steel ball rolling element. The change from point contact to line contact significantly enhances its load-carrying capacity. When bearing high loads...

Friday 27 October 2023

Prix : usd0.08-0.6/meter

What Is OSP in Networking? Introduction of OSP Fiber Optic Cable(Outside Plant Fiber Cable) Outside plant fiber optic cable is outside plant fiber cable, commonly used for outdoor applications. OSP fibre cables are divided into two types: central tube and layer stranded cable. Types...

Friday 27 October 2023

Prix : usd0.08-0.6/meter

Fiber optics, or optical fibers, are long, thin strands of carefully drawn glass about the diameter of a human hair. These strands are arranged in bundles called optical cables. We rely on them to transmit light signals over long distances. Contact UnitekFiber, a professional fiber...

Friday 27 October 2023

Prix : usd0.08-0.6/meter

MPO patch cable, MPO patch cord is a 12 fibers 0.9mm cable or a 12 cores breakout fiber cable, one end with a MPO connector and another end with 12pcs of SC connectors. MPO/MTP Fiber Cable|MPO to SC Fiber Optical Branch Patch Cord 12 cores 0.9mm SM MM MTP/MPO cords are used in Plug-and-Play...

Friday 27 October 2023

Prix : 100USD

Toilet seat casting mold quality points: cover mold cycle, cover mold life, Parting line whether there are sharp edges? Is the cover wall thickness even? How to make covers are light and strong? How to design a good exhaust ? How to make your toilet cover polish durable? How to judge...

Friday 27 October 2023

CNC Milling Application Provide high quality custom precision machining services and CNC machined parts with competitive prices as well as secondary processing and sub-assembly work for CNC prototyping and precision CNC machining parts with wide range of mateials for both metal and plastic...

Thursday 26 October 2023

Prix : USD2-USD200

Wax type thermostat is the most widely used in combustion engines, and SDZ possesses and masters matured skills of wax thermostat's development and production. The wax pellet thermostat in the copper expands when it heats up and contracts when it cools. Characteristics of Wax Type...

Thursday 26 October 2023

As one of the leading electric power cable suppliers and electric power cable manufacturers in China, Holly Electronics offers electric cable from pole to house that is mainly used to connect the oem wiring harness of various instruments in the power transmission and distribution...

Thursday 26 October 2023

Holly Electronics can customize various specifications of ls swap computer and harness, such as graphics card power supply harnesses, motherboard power supply harnesses, computer fan harnesses, SATA cable harnesses, mining machine cable harnesses, USB HDMI cable harnesses, PC case...

Thursday 26 October 2023

This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 Mpa pressure feeding,42~45db noise level, adjustable pressure, Workflow 2.7~5Liter per minute, Max current 3.2~5.0A WHAT IS A BRUSHLESS RO BOOSTER PUMP? A brushless RO booster pump employs...

Thursday 26 October 2023

Material: Aluminum Process: Stamping Finish: Zinc Plating About HHC-0421 Stamped Aluminum Parts This is an electronic accessory used to fix and support components, usually using aluminum alloy as the material, which has low density and good strength, and also has excellent corrosion...

Thursday 26 October 2023

LEFOO LFT2800 pressure transmitter is widely used in the measurement of fluid medium pressure in test systems such as fire protection, water treatment, water supply systems, air compressors, pneumatic devices, and factory automation. It has excellent anti-corrosion and anti-wear performance...

Thursday 26 October 2023

Low differential pressure transmitters and low cost pressure sensor controller of LEFOO pressure control have a wide application for air-conditioning/ventilation, duct static pressure measurement, filter and flap control, airflow control, cleanroom control, Lab/Fume hood control, airflow control...

Thursday 26 October 2023

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

IEC Dummy Socket is designed by Jayuan Technology Department own. We learned some spirit from the existing Europe Standard EV Charging Socket, and make it easier to do every step that required. The core of Jayuan IEC Dummy Socket is SIMPLE. The iec 62196 socket can be well fit with...

Thursday 26 October 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Auto Parts Mould Automotive Parts Mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Thursday 26 October 2023

Benefits of Explosion Bonded Clad Plate a. The Explosion Bonded Clad Plate is the metal clad plate produced by the explosive bonding method. It owns core advanced benefits as followings: The Explosion Bonded Clad Plate does not change the chemical compositions and physical states...

Thursday 26 October 2023

Gallianz is a professional supplier of clad plates. We are proficient in all the production processes. Each details are our advantages. We also offer a range of metal processing services: Clad Plate Edge Peeling Service, Clad Plate Edge Beveling Service and Clad plate Coiling Service...

Thursday 26 October 2023

LC Uniboot LC Unibody is fully compatible with the original LC family of single-mode and multimode connectors, adapters, and associated components It is manufactured using a ruggedized material that results in a latch trigger up to four times stronger than average. The LC Unibody...

Thursday 26 October 2023

Fused Biconic Taper Wavelength Division Multiplexing (Fused WDM) refers to a wavelength division multiplexer based on the fusion taper process. When the cores of the two single-mode fibers are sufficiently close, the two machine modes in the single-mode fiber will be coupled to each...

Thursday 26 October 2023

Molybdenum wire is mainly refers to the wire cutting processing with high pressure electric field continuous movement to cut the workpiece made of molybdenum and other precious metal consumables, that is wire cutting machine tool processing workpiece continuous movement of fine metal...

Thursday 26 October 2023

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Thursday 26 October 2023

Packson provides our customers a various CNC machining services to our customers, including milling, turning, grinding, drilling and more. Our teams are able to manufacture custom aluminium parts via our precision manufacturing machine such as 3,4, and 5 axis CNC machining centers...

Thursday 26 October 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Thursday 26 October 2023

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...