PRESSURE - 12956 Annonces

Vendredi 13 avril 2007

Quantité : to be nego - Prix : to be negotiate

CP-5 Shotcrete Machine is a middle type with output 5m3/h, used in spraying concrete and mortar to do the supporting works in tunnel, mining, water-electricity projects, foundation engineering and soil-rock slope. The unit can be used for both dry and damp concrete mixes. Up to now...

Dimanche 08 avril 2007

The machine is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material...

Dimanche 08 avril 2007

Application: It is used to remove the dust in sand. It aims at improving the quality of sand. The materials include the requiring gravel in building-site, gravel factories, hydropower station and concrete dam site, post and electric pole factory, glass factory's quartz sand and refilling...

Dimanche 08 avril 2007

We are a developer & system solutions of automation technology and devices geared toward the manufacturers of Bulk Handling & Air pollution System products. Our latest development is a Fully Programmed, On Demand, Bag House Controller PLC. This device measures, and communicates (RS485...)

Jeudi 29 mars 2007

Quantité : 1

TW5000 Injection unit Cylinder head volume(cm3): 2000, 2260, 2540 Shot weight (g): 1800, 2030, 2280: Screw diameter (mm): 80, 85, 90 Injection pressure(Mpa): 168, 149, 133 Rate of injection(PS)(g/s): 430, 480, 540 Plastising rate (PS)(g/s): 70, 80, 90 Screw speed(rpm): 150 Screw length/...

Jeudi 29 mars 2007

Quantité : bulk - Prix : FOB shanghai

Detailed Product Description GW9-12 (W) series outdoor high pressure isolators, for the single-pole structure high-voltage switch equipment, in the outdoor 12 kilovolts lines networks have voltage in the non-load situation, divides, using of the closed circuit. It is equipped with fixedly pulls...

Samedi 17 mars 2007

Specification: 1.5-80mm X 500-2000mm Performance: With middle pressure, strong tense and small distortion; Usage: Punching seals and rings, which are applied to light conveying strap and work in the surroundings with high strength requirements. Specific Gravity: 1.4-1.6 Tensile Strength: 3...

Samedi 10 mars 2007

General Description: Specification Overall Length: Minimum 180mm (without teat) Width when Flat Laid: 49 + / -2mm, 53 + / -2mm, 57 + / -2mm Wall thickness: 0. 03-0. 09mm Elongation at Break: Minimum 65% Tensile strength: Minimum 17MPA Bursting Volume: Minimum 18 liter Bursting Pressure...

Vendredi 09 mars 2007

Quantité : a 40' HQ - Prix : USD 170.00 per set

Voltage: 230v/1ph Power: 2.2kw/3Hp copper winding Cylinder(mm): ф65*2 Capacity: 336l/min Pressure: 10bar/145psi Speed: 1100rpm N.W: 71kg Dimension: 114*44*77cm aluminum air pump, 50L tank(color as per your order, we usually print red or green), with two rubber wheels and a "W" style stand...

Vendredi 09 mars 2007

Quantité : a 40' HQ - Prix : USD 52.00 per set

Voltage: 230v/1ph Power: 1.5kw/2Hp Cylinder(mm): ф48*2 Capacity: 206l/min Pressure: 8bar/115psi Speed: 2850rpm N.W: 44kg Dimension: 81*32.73.5 50L tank, color as per your order, with two rubber wheels and a "W" style stand. For more information, pls feel free to contact us.Localisation ...

Samedi 03 mars 2007

Quantité : 100000pcs

Air pressure eyes Massager 1.With 20 massage points,simulating Chinese traditional massage modes like rotation, shaking, for treatment of prevention of near-sightedness: 2.Fatigue elimination and sound sleep:Use it before you sleep and make your nerves completely relaxed,eliminate...

Mardi 27 février 2007

Quantité : 50000

ASA ATV500 / quad ATV500 Clutch Type: Single disc, diaphragm spring and dry. Displacement: 493 cc. Gradient Capacity: < 40? Max Power and Rev kw/(r/min): 24/6500kw(r/min). Manufacture’s power and Rev: 16/4500kw(r/min). Max Torque and Rev.: 39/5500N.m(r/min). Track(mm): 1250mm. Vehicle base...

Samedi 17 février 2007

Forged Steel Ball valves: Size: 2"-36" Pressure ratings: ANSI Class 150-2500Lbs Body: A105(N), LF2, A182 F304(L), F316(L), special alloy steel etc. End conn.: RF, RTJ, BW Operation: lever, worm gear, electric 2-PC, 3-PC, RB, FB, Floating & Trunion Ball, Fire safety, Anti-static, Anti-blowout...

Dimanche 11 février 2007

Glass Beads for Blasting are suitable for high pressure sandblasting and preening processes. Glass Beads for Grinding are generally used as disperser,grinding media and filler materials in dye,paint, Coatings,rubber and paper manufacturing. Coated glass beads are treated with high...

Dimanche 11 février 2007

High pressure foam folding doors for efficient temperature preservation. Internal single-layer sliding glass door Deep and quick freezing. Handle with recessed Door lock for safety storage Freezer and refrigerator are both independent Complete with a basket for convenience of allocationLocalisati...

Dimanche 11 février 2007

High pressure foam folding doors for efficient temperature preservation. Internal single-layer sliding glass door Deep and quick freezing. Handle with recessed Door lock for safety storage Freezer and refrigeration switch freely Complete with a basket for convenience of allocationLocalisation ...

Dimanche 11 février 2007

High pressure foam cover for efficient temperature preservation. Deep and quick freezing. With gripped handle Door lock for safety storage Universal castors for easy moving Freezer and refrigerator are both independent Complete with a basket for convenience of allocationLocalisation : NO...

Dimanche 11 février 2007

High pressure foam cover for efficient temperature preservation. Deep and quick freezing. With gripped handle. Door lock for safety storage. Freezer and refrigeration switch freely. Universal castors for easy moving. Complete with a basket for convenience of allocationLocalisation : NO...

Samedi 10 février 2007

Quantité : 1000 - Prix : with reason

RU (DU，SF-1) the non- oil lubrication bearing is take the high qualitylow-carbon steel plate as a substrate, middle agglutinates the spherebronze powder, the superficial rolling teflon (PTFE) and the leadmixture, is sliding bearing which the volume system becomes. And hasthe...

Mercredi 24 janvier 2007

We are specialized in production of a wide range of cauldron-using and pump-using machinery seals, Design & manufacture all kinds professional mechanical seals, according to the high temperature, high pressure, high speed requirement. We were awarded the quality system certificate of ISO9001...

Lundi 15 janvier 2007

three wires electronic ignitor adopts high pressure trigger tube,suitable for HS70W-400W and MH 70-400W AT 220V-240V,50/60HZ ESPECIALLY AVAIALBE FOR DOUBLE ENDED METAL HALIDE LAMP70-150W.Localisation : INDUSTRIAL ZONE,XIKOU,FENGHUA,NINGBO,CHINA, 315502 FENGHUA, Personne à contacter ...

Lundi 15 janvier 2007

characateristic:high effective energy saving,long service life,good photochromism and light source,high luminous effciency. Application:Avaialbe for the facade,billboard,shop window,sports event,indoor and outdoor deco lighting.Localisation : INDUSTRIAL ZONE,XIKOU,FENGHUA,NINGBO,CHINA...

Lundi 15 janvier 2007

we can offer Single ended High pressure sodium lamp,Double ended High pressure sodium lamp,inner ignition high pressure sodium lamp,double tube high pressure sodium lamp. can supply different wattage as customer required,the average service life can reach about 24000hours.Localisation ...

Dimanche 14 janvier 2007

Quantité : MOQ - Prix : 1,00 €

Engine model: 2V49FMM Dimension ((L×B×H)mm): 2215×780×1140 Steering angel (°): 45 Min.Ground clearance (mm): 150 Steering dia.(mm): 5600 Wheel base (mm): 1495 Fork advancing angel (°): 32 Kg N.W.: 137 Kg G.W.: 142 Idle(r/min): 1300 Brake performance: ≤7m/30km/h Max. Voice (dB(A)): ...

Dimanche 07 janvier 2007

Triplex single action horizontal mud pumps, made suitable for high pressure jet drilling. Long strokes and relatively low pump speed. Essential parts of the pump are made of quality alloy steel. The shell of the pump is made of welded steel, with high rigidity. The lubrication system...

Dimanche 07 janvier 2007

Quantité : ANY

Our ISO 9001:2000 Certified company, is a professional Sheet Metal Small & Medium Pressed Components manufacturing company located at Kirti Nagar, New Delhi. We are actively engaged in manufacturing Press tools, Aluminum Casting Dies, Gasket Cutting Dies & processing sheet metal components...

Mardi 19 décembre 2006

Quantité : many - Prix : negotiation

Application NSH GER series engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxide, acid, pitch, particles...

Samedi 16 décembre 2006

Our company is a comprehensive corporation that specialized in manufacturing and trading of refrigeration devices and parts.Our company has passed ISO 9001 and CQC certification and the main products of the company include the solenoid valve,pressure controller.Variety of expansion valve...

Samedi 16 décembre 2006

Quantité : 500units/p - Prix : 1000.00USD

Cooling capacity:10kw-400kw Quiet operation Single packaged unit, easy and low cost to install. Easy to Easily accessible system components. Heavy duty mounting chassis for the whole unit with lifting lugs Anti-vibration mounting compressor rubber type A rubber isolator-mounted compressor...

Samedi 09 décembre 2006

Characteristics of the product: Belonging to open structure airproof tie-in system of machine pressure ,it is widely used for communication , network system, cabled T.V. of CATV, the fiber optic cable by network , the direct and branch connect-ion, the body adopts the high and strong...