CONICAL - 341 Annonces

Jeudi 21 juillet 2022

Flat Bed CNC Lathe can turn large axle parts and disc parts with various kinds of threads, arcs, cones, end faces and inner and outer surfaces of revolving bodies. It can meet the requirements of high-speed cutting. Features of Flat Bed CNC Lathe A series CNC lathe is controlled by...

Mardi 19 juillet 2022

Threaded button bit, a kind of rock drill bits for hammer drill and rock drill bit, is mainly used with hydraulic drill rods (pneumatic drill rods) and hydraulic rock drills (or pneumatic rock drills) in top hammer drilling. It uses different forms of threads to cooperate with the...

Vendredi 15 juillet 2022

This plastic profile extrusion line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption, and etc. The main plastic profile extruder speed controlled...

Samedi 02 juillet 2022

Cyclone Dust Separator Design Cyclone type dust collector is a type of dust removal device. The dedusting mechanism is to make the dust-containing air flow rotate, and the dust particles are separated from the air flow and trapped on the wall by means of centrifugal force, and then...

Samedi 02 juillet 2022

Now, we provide various types of extension sets, including iv extension set with injection port, iv extension set with luer lock, microbore extension set, small bore extension set, syringe extension set, y extension set, etc. Introduction Of Extension Sets The extension sets are assembled...

Jeudi 30 juin 2022

Quantité : 30set/Mont - Prix : 1000USD-40000USD

The CCTV detection sonar floating system adopts sonar imaging technology and CCTV video detection technology. The underwater scanning unit (sonar head) and the water detection unit (rotating lens) are placed on the water surface inside the pipeline (full pipe or half pipe). Using...

Jeudi 30 juin 2022

Quantité : Mould: 150 - Prix : 0.05-100USD

The following are some of the rubber parts we have made. They are only for displaying our products range and shape. but not for sale. Upload drawings right now to get a manual quotation within 24 hours. Product Show Vibration mount Rubber vibration mounts are generally made of rubber-coated...

Jeudi 30 juin 2022

Quantité : 30set/Mont - Prix : 1000USD-40000USD

The X5-HR all-terrain pipeline robot, a kind of sewer inspection crawler, consists of three parts: a spiral propeller crawler, a cable reel, and a display and control terminal. The pipe crawler camera of this type of robot is HD P&T camera. This sewer crawler camera is suitable...

Jeudi 30 juin 2022

Quantité : 30set/Mont - Prix : 1000USD-40000USD

X4 sonar pipe inspection System is mainly used for the detection of water-carrying (full water or above 2/3 of the water level), inspection wells or underground cavities. It automatically analyzes and extracts the inner wall contour, establishes a three-dimensional model, and performs...

Jeudi 30 juin 2022

Quantité : 3500+/year - Prix : USD25,000-USD1,100,0

INDUSTRIAL CENTRIFUGE SEPARATOR WORKING PRINCIPLE The centrifugal separator working principle is fed tangentially to the cylindrical top of the centrifugal separator to produce rotation. Through the slot in the air inlet chamber, the flow rate in industrial centrifuge is further accelerated...

Jeudi 23 juin 2022

Prix : 1000-6000USD

Advantages of Helical Antenna Helical rf antenna is a spiral-shaped antenna, which is composed of spirals with good conductivity and can transmit and receive polarized electromagnetic signals rotating in space.HBTE provides you with superior performance of backcavity helical antennas...

Mercredi 22 juin 2022

Prix : 100USD

Large Metal Spinning Spinning in sheet metal belongs to the processing of local continuity, the instantaneous deformation zone is small, and the total deformation force is small. Some parts with complex shapes or materials that are difficult to deform are difficult or even impossible...

Samedi 18 juin 2022

Self-aligning roller bearings can adapt to the severe environment and working condition, are mainly designed to bear very heavy radial loads and heavy axial loads, have extremely high impact load resistance, and can realize full-capacity load through self-aligning functions thereof...

Jeudi 16 juin 2022

This machine developed by Kailite company plastic pipe production line manufacturers is featured of unique structure, a high degree of automatic, easy operation and stable reliable continuous manufacture performance can meet all kinds of plastic pipe production needs. How to Extrude PVC Pipe? 1...

Jeudi 16 juin 2022

This line is the manufacture facilities of PVC plastic profile materials, including window and door series profile, plate, sheet, tiny bubble profile and tiny bubble ornament plate. The big shape plastic door and window profile plastic pipe production line are developed by our corporation...

Mercredi 25 mai 2022

Features of Conventional Double ColumConventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move up and down to achieve better cutting accuracy. We have several models to be selected for the...

Jeudi 21 avril 2022

Quantité : 1000 sets - Prix : USD 1-1000

Seal Spare Parts Sleeve In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It acts as a shield...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Plastic extrusion is defined as a manufacturing process (high-volume), in which the raw plastic / raw plastic material is melted and then formed in a continuous profile. With this process, various products can be manufactured such as pipe/tubing, window frames, weather stripping, wire insulation...

Samedi 09 avril 2022

HBTE conical horn antenna with a careful design and produce process is widely used in EMI detection, directional detection, antenna measurement, darkroom test and other fields. Its working frequency from 18Ghz to 40Ghz and its standard gain from 12 dB to 25dB. Conical horn antenna...

Samedi 09 avril 2022

HBTE's conical helix antenna is designed to transmit and receive signals in the frequency band of 0.15 to 6 GHz. It is a medium gain, medium VSWR helical antenna. The left-handed circular polarization enables it to locate the radiation source quickly, and the logarithmic helix enables...

Samedi 09 avril 2022

Prix : 10-30USD

Kohope is a professional av fistula needle manufacturers and offers many types of av fistula needles at affordable price, including fistula needles for dialysis. What is a Fistula Needle？ The AV Fistula Needles are assembled by a protective cap, needle tube,double-wing plate, lock fitting...

Jeudi 07 avril 2022

Quantité : 1000 units - Prix : 50~1000 USD

With compact size, high accuracy, digital push force meter is easy to operate and handy to carry out. The digital pull force gauge, also called digital push pull force meter, can be widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts...

Jeudi 07 avril 2022

Quantité : 1000 units - Prix : 50~1000 USD

The handheld digital force gauge is a small, simple, multi-function, and high precision push and pull test instrument, which is widely used in electronic appliances, construction hardware, fire equipment, power machinery, scientific research institutions, and other industries. The...

Jeudi 07 avril 2022

Quantité : 1000 units - Prix : 50~1000 USD

The DHG-050 digital height master is a compact digital micrometer offering flawless contact measurements of dimensions, thickness and depth. This digital height master features a measuring length equal to 50 mm and accuracy of 1 µm at 20° C. Stands are available in ceramic, granite...

Mercredi 23 mars 2022

In some optical application, lens, reflector and other micro-optics components are normally needed to be assembled on optical fibers' end face. We can also process the fiber tip into a kind of lens. At present, MEISU has the first-class optical fiber lens processing technology, and...

Samedi 19 mars 2022

Quantité : 10000 Piec - Prix : 150-10000USD

Overview of TCI Bit TCI drill bit is an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact the bottom of the well, the rock breaking torque is small, the contact area between the cutting teeth and the bottom of the well is small...

Samedi 19 mars 2022

Quantité : 10000 Piec - Prix : 150-10000USD

pdc cutters for sale Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and...

Mardi 15 mars 2022

The air filter is an important part of a vehicle. It can effectively remove and filter particles such as dust and impurities in the air during engine intake to ensure clean air and protect the engine from wear and tear. Filton's air filters have many advantages such as moisture-proof...

Mardi 08 mars 2022

Prix : 1000-6000USD

PVC Twin Screw Extruder PVC is a non-crystalline polymer of polyvinyl chloride. Its glass transition temperature is 105℃-75℃ depending on the molecular weight. It has flame retardancy, high rigidity, excellent chemical resistance, and electrical insulation, but it is a heat-sensitive resin...

Mardi 08 mars 2022

Prix : 1000-6000USD

PVC Profile Extrusion Line This PVC profile extrusion line features stable plasticization, high output, low sheering force, long life service, and other advantages during PVC profile extrusion process. The production line consists of control system, conical twin-screw extruder or...