FLOWING - 520 Annonces

Saturday 04 February 2023

Gas & Water Assisted Injection Mold Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas injection moulding; The product wall thickness of water-assisted...

Monday 30 January 2023

A Few Words about Wellhead Equipment A wellhead is a component located on the surface of oil or gas well, which provides structure and pressure bearing interface for drilling and production equipment. The main purpose of using the wellhead is to provide a peadant point and pressure...

Saturday 21 January 2023

Description of Oil Drilling Grade CMC & PAC CMC & PAC can be used as fluid loss reducer or viscosifier in drilling fluids. The function of CMC is to reduce the fluid loss as much as possible through forming low permeability, flexible, thin and compact filtration cake on borehole wall...

Thursday 12 January 2023

Spray gun paint cup Spray gun paint cup is a metal cup with sharp edges and can rotate at high speed. Spray China spray paint cups is connected to the negative DC high-voltage, and the workpiece being sprayed is connected to the positive pole, so a high-voltage electrostatic field...

Tuesday 13 December 2022

Quantité : 1000000 pc - Prix : USD0.5-USD3000.0

The single-disc check valve is also called a single plate check valve, a wafer check valve: it is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side...

Tuesday 13 December 2022

Quantité : 1000000 pc - Prix : USD0.5-USD3000.0

Check Valves Flanged End are used mostly to prevent the medium from flowing back in the piping system. Check valves only allow the medium to flow in one direction, and when the medium flows in, the disc of check valves swings off the seat to allow forward flow and when the flow stops...

Friday 18 November 2022

Base on your requirement, HOLIKE would like to offer the most suitable solution of kitchen cabinets china made in China with different colors, styles, shapes, sizes, materials. Except for the Kitchen cabinets, HOLIKE are matching with the necessary hardware and other accessories....

Thursday 10 November 2022

What is an air hopper spray gun? An air hopper spray gun is used for facilitating textured finishes for drywall-covered surfaces. With an air compressor equipped, the air compressor hopper gun can push the material through its nozzle and spray it on the wall or ceiling. So with hopper...

Wednesday 02 November 2022

Barbed Check Valve are designed for connecting flexible peristaltic tubing in low pressure systems less than 0.3Mpa to control the flow directions to make fluids flowing in one specific direction, so it makes fluids inlet-only or outlet-only to pumps or valves. If you want to know...

Thursday 27 October 2022

Precision injection lsr molding is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm...

Saturday 22 October 2022

Mikrometry Coating Thickness Detector will measure all coatings on metallic substrates using the magnetic induction or eddy-current principles, ensuring the correct measuring paint thickness on metal has been applied, such as paint, lacquers, sealants, or plating. The metal thickness...

Friday 21 October 2022

Painting line refers to metal and non-metal surface covering protective layer or decoration layer special assembly line tool product advantages painting assembly line equipment is suitable for workpiece surface painting, plastic spray treatment. Inquiry uv coating machine for sale...

Thursday 20 October 2022

BAC cooling tower filling is one of the most important parts of the heat exchange process of the cooling tower. It is also the main part to improve the efficiency of cooling tower and ensure the economy and safe operation. The surface of specially designed packing is an S-shaped ladder-shaped...

Tuesday 18 October 2022

Prix : $0.1-$200

A bronze high temperature check valve is a type of automatic valve. The valve disc is pushed by the pressure of the flowing media in the pipeline to close and open the valve. The check valve disc closes when the medium stops flowing, and it can be effective. Preventing the medium...

Tuesday 27 September 2022

The PTFE flask usually has the appearance of a round belly and a thin neck, which is obviously different from the beaker. Its narrow mouth is used to prevent the solution from splashing out or reduce the evaporation of the solution, and can be used together with the rubber stopper...

Tuesday 20 September 2022

Prix : 10-30USD

Advantages of eccentric nipples Relevant experiments and studies show that the eccentric nipple restores the breastfeeding angle to a certain extent, and it is flat and unnecessary to look up when drinking milk, which can effectively protect the baby's cervical spine; it won't hit...

Tuesday 20 September 2022

In the drilling process, in order to prevent the collapse of the hole wall, sand (water), water leakage, or to separate the water layer, the metal or non-metal pipe is used to drill into the borehole to maintain the drilling and ensure the normal drilling technology. Measures, called...

Saturday 17 September 2022

Quantité : 2-10 units - Prix : 2 million-50 million

Regenerative Thermal Oxidizer (RTO) produced by RUIYUAN uses ceramic media to recover upwards of 97% of the available energy and is widely considered to be the most energy-efficient oxidizer. Its ability to repurpose the thermal energy generated during operation to reduce operating...

Friday 02 September 2022

Via In Pad fr4 pcb board, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into the via in pad, avoid solder ball getting into via or solder mask cover on pad and cause false soldering. HUIHE CIRCUITS Via In Pad PCB has...

Thursday 25 August 2022

Prix : 1-10usd

PLASTIC PIPETTE DROPPER Pipette plastic droppers are used with dropper caps. Compared with glass pipette droppers, plastic pipette droppers are more flexible in materials, easy to transport and store, less fragile than glass pipette droppers, so they are safer. Mainstream packaging...

Thursday 25 August 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, the valve shuts fully to prevent backflow. Swing check valves belong to the group of automatic valves, which are used mostly in pipelines...

Friday 12 August 2022

Quantité : 1000

Soxi is one of the top plastic material dryer manufacturers, our plastic drying machine will avoid the following questions. In the plastic auxiliary machinery, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage...

Tuesday 09 August 2022

Painting line refers to metal and non-metal surface covering protective layer or decoration layer special assembly line tool product advantages painting assembly line equipment is suitable for workpiece surface painting, plastic spray treatment. Inquiry uv coating machine for sale...

Friday 05 August 2022

Quantité : 300K units - Prix : 133-250USD

This stainless steel dish washing machine with a width of 60 centimeters and a stainless steel tub. You can put up to 16 place settings in the dishwasher. It is touch control, and you can delay the cycle up to 24 hours to run the stainless steel dishwasher at a later time. With the...

Tuesday 02 August 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Tuesday 02 August 2022

Quantité : 9000 - Prix : USD10-USD1000000

The nihon spindle drift eliminator is composed of sine wave blades. Its function is to separate the droplets in the air flow. It can not only reduce the drift rate, but also be regarded as an effective dust screen. It can protect the spray system from sunlight and dust pollution....

Friday 15 July 2022

Quantité : Per Order - Prix : $0.1-$200

Backflow preventer for sale is a hydraulic control combination device that strictly limits the water flow in the pipeline to only one-way flow according to the situation that the backflow pollution of the tap water supply equipment, especially the drinking water pipeline is serious...

Friday 15 July 2022

Quantité : Per Order - Prix : $0.1-$200

The working principle of valve is not exactly the same, and different valves have different working principles. The working principle of the brass ball valves for water is to make the valve unblocked or blocked by rotating the valve. The working principle of the plug valve is to rely...

Wednesday 13 July 2022

Spray gun paint cup Spray gun paint cup is a metal cup with sharp edges and can rotate at high speed. Spray China industrial paint gun cup is connected to the negative DC high-voltage, and the workpiece being sprayed is connected to the positive pole, so a high-voltage electrostatic...

Saturday 09 July 2022

Sopure's new-designed puppy-period pee pads have a super absorbent fluff filling layer: the mattress is designed with a high-quality polymer layer, which helps to absorb liquid, urine, or excrement faster and is locked to help control odor and humidity. Multi-purpose support: Our...