POLARITY - 293 Annonces

Mercredi 11 décembre 2019

Flow Process of HPLC column First, the solvent in the storage bottle is pumped into the chromatographic system by pump and then output, and then introduced into the sampler after flow and pressure measurement. Second, object to be tested is injected by the sampler, passes through...

Jeudi 10 octobre 2019

The essence of the chromatographic process is the process of distributing the equilibrium of the molecules of the substance to be separated between the stationary phase and the mobile phase. The distribution of the different substances between the two phases will be different, which...

Mercredi 09 octobre 2019

Solid phase extraction (SPE) is used to reduce sample matrix interference and improve detection sensitivity. The separation selectivity of the solid phase depends on the retention strength of the components that can be retained, so the selection of the solid phase will depend on the...

Mardi 08 octobre 2019

The essence of the chromatographic process is the process of distributing the equilibrium of the molecules of the substance to be separated between the stationary phase and the mobile phase. The distribution of the different substances between the two phases will be different, which...

Samedi 28 septembre 2019

Depending on the packing of the HPLC column. The following column types are available on the market: 1. Silica gel HPLC column: Silica gel is the earliest chromatographic column packing used in liquid chromatography. It has a wide range of applications. However, it can only be used...

Mercredi 25 septembre 2019

General requirements for adsorbents: large surface area and certain adsorption capacity. Does not chemically change with the developing agent, does not react with or catalyze, decompose or associate with the substance to be separated, and the particles are uniform. Silica gel and...

Lundi 23 septembre 2019

Let's take a look at two common adsorbents for adsorption chromatography. Polyamide The polyamide adsorbent can be divided into nylon 6 (polycaprolactam) and nylon 66 (polyhexamethylene adipamide), which are hydrogen bond adsorption and semi-chemical adsorption. There are many amide...

Vendredi 20 septembre 2019

Solid phase extraction is essentially a liquid chromatographic separation. The main separation mode is the same as that of liquid chromatography. It can be divided into normal phase (the polarity of the adsorbent is greater than the polarity of the eluent), and the reverse phase (the...)

Mardi 03 septembre 2019

The basic principle of SPE cartridges is that the liquid sample is made to pass through the adsorbent to retain the tested substance, and then the impurities are washed away with appropriate strength solvent, and then the tested substance is eluted with a small amount of good solvent...

Vendredi 16 août 2019

NH2 HPLC columns refer to the chromatographic columns that use silica gel as matrix carrier to bond amino groups. They are usually used for the analysis of carbohydrate compounds, and the mobile phase is usually methanol, acetonitrile and buffers salt solution. - The cleaning method...

Lundi 12 août 2019

The system of an HPLC column is composed of a liquid, a reservoir, a pump, a sampler, a column, a detector and a recorder. - The packing material of HPLC columns - The packing material has high carbon content, small surface polarity, very low chemical purity and high surface separation...

Jeudi 08 août 2019

Chromatography is a separation and analysis method and the separation is the core. Therefore, HPLC columns are the heart of the chromatographic system. The requirements for the column are high efficiency, good selectivity and fast analysis speed. Generally, the column length of about...

Jeudi 08 août 2019

Most common SPE cartridges are injection syringes made of polyethylene, in which there are two plugs made of polypropylene or fiberglass, with a certain amount of chromatographic adsorbent (filler) between the two plugs. SPE cartridges without sieve plate 1. Avoid “non-specific adsorption” 2...

Lundi 05 août 2019

One of the main factors affecting the life of the liquid chromatographic column is the mobile phase. There are three aspects of the mobile phase factors. The pH value of the Mobile Phase The fillers of different substrates apply to different pH value range. Under normal temperature...

Mercredi 31 juillet 2019

Solid phase extraction (SPE), developed in the 1970s, can replace the traditional liquid-liquid extraction in many fields and has been applied more and more widely in the laboratory. The common solvent of SPE Hexane, isooctane, tetrahalide carbon, trihalomethane, dihalomethane, tetrahydrofuran...

Vendredi 19 juillet 2019

Bonded-phase chromatography is a liquid-liquid chromatography method in which a stationary phase is covalently bound to a carrier particle, which overcomes the mechanical shock in the distribution chromatography, the constant loss of the stationary phase and the gradual change of...

Vendredi 05 juillet 2019

When the polarity of the stationary phase is greater than the polarity of the mobile phase, it can be called normal phase partition chromatography or simply normal phase chromatography. If the polarity of the stationary phase is less than the polarity of the mobile phase, it can be...

Jeudi 04 juillet 2019

C8 HPLC columns are used to isolate many organic compounds, which are one of the reversed phase silica gel columns. The maintenance of C8 HPLC columns requires organic solvents. Chromatographic grade methanol is recommended and different brands of chromatographic columns should be...

Vendredi 28 juin 2019

Stationary Phase & Mobile Phase The stationary phase is used to separate the substances, which is packed into HPLC Column directly; Mobile phase is the carrier, which carries the substances into the stationary phase and goes through the stationary phase. It is gas in the vapor phase...

Lundi 24 juin 2019

Low-power Liquid Level Sensor With 3.3-5V Output Low power Liquid Level Gauge, it was design for internet of thing specially, its low power consumption is suitable to power by battery and Periodic supply,can be used to measure liquid level for fire protection water net, heating system...

Lundi 24 juin 2019

Lightning Protection Hydraulic Liquid Level Transmitter & Gauge Lightning protection liquid level Sensor,can be used to measure liquid level for Reservoirs, river, sewage treatment, urban water supply, water tank, ocean level and others field need liquid level measurement. Typical...

Lundi 24 juin 2019

Flush Diaphragm Pressure Measurement; Meets 3-A Sanitary Standards Excellent Reverse polarity, instantaneous Overcurrent and Overvoltage protection, Applied to High stability and sensitivity for high temperature, high viscosity and the medium are prone to clogging, or Food, Pharmaceuticals...

Vendredi 14 juin 2019

Hawach introduced the properties and application range of HPLC column stationary phase in the silica gel matrix. Silica gel matrix: Silica gel, weakly acidic, has a strong memory, used to separate non-polar, weakly acidic compounds, oils, etc.; C18, a silica-based uncapped reversed-phase...

Lundi 20 mai 2019

Low-power Digital Liquid Level Sensor With 0.5-2.5V Output Low power Liquid Level Gauge is design for internet of thing specially. Its low power consumption is suitable to power by battery and Periodic supply. It can be used to measure liquid level for fire protection water net, heating system...

Lundi 20 mai 2019

Corrosive Hydraulic Liquid Level Transmitter & Gauge The anti-corrosion liquid level transmitter is based on the principle of hydrostatics to measure the level or water depth,high corrosion resistance for Sulfuric Acid(H2SO4), Hydrochloric Acid(HCI), Sodium Hydroxide(NaOH). Corrosive...

Samedi 18 août 2018

What are the most common problems with automatic coil winding machine and what are the using techniques? There are four common problems with the coil winding machine: flatness -- winding number -- polarity ---- wounding coil - 1. The factors affecting the flatness: - 1). Equipment problems: A...

Jeudi 19 juillet 2018

Quantité : 10000 /Uni - Prix : $9.00USD/

Description Specifications Brand Name: MINGXIN Model Number: 33.6v 5a Use: Standard Battery Type: Electric Place of Origin: China (Mainland) Socket Standard: EU/AU/UK/US Color: Black Output: 33.6V Product name: 33.6V5A Application: E-bicycle, UAV art-tech, garden tools, power tools ...

Samedi 16 juin 2018

Quantité : 1000

Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744 Email: helen@industrial-part.com skype: helen Ye QQ: 2667575446 web: industrial-part.com Address: No.127-9 Shengzhou Road,Qinhuai District, Nanjing, Jiangsu Province, China features...

Samedi 16 juin 2018

Quantité : 100

Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744 Email: helen@industrial-part.com skype: helen Ye QQ: 2667575446 web: industrial-part.com Address: No.127-9 Shengzhou Road,Qinhuai District, Nanjing, Jiangsu Province, China Nanjing Meily...

Mercredi 09 mai 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/fuel-pressure-sensor-switch-499000-7711-4990007711 / - Description - Fuel Pressure Sensor Switch 499000-7711 4990007711 1. Self-monitoring offset and sensitivity 2. Excellent media resistance as the medium only comes into contact...