PROPORTION - 637 Annonces

Jeudi 26 octobre 2023

Prix : USD900-USD2000/MT

Polyethylene emulsion are used in the textile industry and are mainly used as softeners and sizing aids. Polyethylene wax emulsion produced by KING HONOR is an odorless, non-corrosive non-ionic emulsion, resistant to acid, alkali, hard water and water. The emulsion is stable, the...

Mardi 24 octobre 2023

Quantité : 65000PCS/m - Prix : $8.00-$300.00/pc

A hydraulic priority flow divider/combiner is a specialized valve used in hydraulic systems to divide or combine hydraulic fluid flow. It is designed as a compact cartridge-style valve that can be easily installed within a hydraulic manifold or valve block. The flow divider function...

Samedi 21 octobre 2023

Peeled steel bar The peeling process refers to the process of removing the outer "skin" of the steel bar by rotating the tool. After peeling, the surface defects can be removed by peeling at the cut to give it a shiny and smooth finish. The peeling process is carried out to maintain...

Mercredi 11 octobre 2023

Wet ball mill is a kind of energy-saving industrial grinding mill which adopts rolling bearings and has high efficiency. Wet grid mining ball mill processing capacity can reach 160 tons per hour. It usually grinds coarser ores. Instruction of Wet Ball Mill The operating environment...

Mercredi 11 octobre 2023

CIC's sludge drying machine process was originally developed for the development of high viscosity media in the concentrating chemical industry and has long been used for the heavy equipment machinery separation of liquid/liquid and liquid/solid media that are difficult to separate...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Extruded Tube Polytetrafluoroethylene extrusion tube process. mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix. storage: storage at 25℃ for 24 hours. extrusion molding: extrusion molding through the extruder. sintering: the product into the...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features. PTFE molded parts have corrosive medium fluid piping...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Lundi 09 octobre 2023

Description of Compostable To Go Containers These lunch boxes are made of sustainable, renewable, and biodegradable materials.These compostable to go boxes can be used to hold hot and cold food. It has reliable strength and does not contain any plastic or wax lining. It has the following...

Lundi 09 octobre 2023

BLACK SOY MILK VS SOY MILK Both Chinese soy milk powder and black soybean powder belong to soybeans powder, and their nutritional values are similar. The differences mainly lie in calories, vitamin E content, protein content, and efficacy. 1. Heat: The heat in soybeans is slightly...

Mardi 12 septembre 2023

Quantité : 1 million - Prix : USD400-USD2000

Hot rolling refers to the process in which the steel is rolled above the recrystallization temperature. After cooling at room temperature, the steel is normalized and cooled to become a hot rolled round finished steel product. If the application is not strict on diameter tolerance...

Mardi 12 septembre 2023

Quantité : 1 million - Prix : USD400-USD2000

Forging refers to a process that involves forming a metal using localized compressive forces, and it can be further divided into cold forging, warm forging, or hot forging based on temperature at which it is performed. Compared with cast alloy steel forged bars, hot forged bars are harder...

Jeudi 07 septembre 2023

Quantité : 20GP

Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after...

Jeudi 07 septembre 2023

Quantité : 20GP

CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with...

Jeudi 07 septembre 2023

Quantité : 20GP

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Mercredi 06 septembre 2023

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Vendredi 01 septembre 2023

Quantité : 5000Ton - Prix : $1-$50/KG

Phytase is a feed enzyme fermented with an excellent genetic engineering strain and produced by advanced post treatment. Phytase can break down phytic acid in feed and liberate phosphorus. Specification of Phytase Name Phytase Product Series Name PhosGen Carrier Starch Activity...

Mercredi 30 août 2023

Projection lens and photographic lens is a pair of opposite lenses, the camera lens is used to image the outside world to the CCD or COMS in the digital format, on the other hand the projection lens design to digital format images projected onto the screen.From the optical design...

Mercredi 30 août 2023

Kitchen weight machine is a good weapon for people who want to keep healthy eating and know the proportion of nutrients in each meal. Without any exaggeration, Transtek weight machine for kitchen use is the best one for you. After years of research and development, Transtek produces...

Mardi 29 août 2023

Soxi is one of the safe and reliable plastic mixer machine manufacturers. Pastic mixer machine is used for the precision proportioning of multi-types of plastic materials in the injection and extrusion industry. The gravimetric batch plastic blending machine can reach an accuracy of ±0...

Vendredi 25 août 2023

Quantité : 1000t/m - Prix : 25kg/bag

Color Masterbatch for Engineering Plastics As an engineering plastic company, Anmei serves customers with tailored-making solutions from standard colors to customized colors and functions. There are different types of colour master batch such as white masterbatch, black masterbatch...

Jeudi 24 août 2023

Quantité : 1000t/m - Prix : 25kg/bag

We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material...

Mardi 22 août 2023

TCI322 is a binocular iris image capture biometric device that meets the technical requirements of public security criminal investigation. It adopts the structural design of binoculars, which perfectly shields the influence of external light, and can be used in both indoors and outdoors...

Mardi 08 août 2023

Organic Blue Algae Materials Microalgae are a typical type of photoautotrophic microorganisms that are widely distributed in freshwater and marine environments. Microalgal biomass is a renewable resource that contains a variety of biologically active substances, such as protein, polyunsaturated...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Vendredi 04 août 2023

Prix : USD 2500/T to USD 35

Industrial Aluminum Profile Otalum's served markets also include a variety of industrial and consumer-based markets known as "Industrial Markets". These are comprised of consumer durables, machinery and equipment, electrical and distribution. Otalum supply many prominent manufacturing...

Mercredi 02 août 2023

A solenoid operated diaphragm valve is one of the crucial control units of any fluid control system to control the media of liquid or gas. When the power is on or off, the media (liquid or gas) can pass through the valve or not, to achieve the purpose of shutting off or allowing fluid flow...