RESINS - 4603 Annonces

Friday 03 November 2023

SiSiB® PC6122 1 2 Bis triethoxysilyl ethane SiSiB® PC6112 (BTMSE) and SiSiB® PC6122 (BTSE) are clear to straw bis-silanes. SiSiB® PC6112 and SiSiB® PC6122 both contain two silyl groups, this unique structure enable it to have better adhesion and weather resistance.Technical Data CAS No...

Friday 03 November 2023

SiSiB® PC6120, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms - copolymerization...

Friday 03 November 2023

SiSiB® PC5962 is an alkylalkoxysilane. Technical Data CAS No. 18166 37 5 EINECS No. N.A. Formula C12H28O3Si Molecular Weight 248.43 Boiling Point 202°C [760mmHg] Flash Point 85 °C Color and Appearance Colorless clear liquid Density 25/25°C 0.88 Refractive Index 1...

Friday 03 November 2023

SiSiB® PC5961 is an alkylalkoxysilane. Technical Data CAS No. 3069 19 0 EINECS No. 221-331-9 Formula C9H22O3Si Molecular Weight 206.35 Boiling Point 203 °C [760mmHg] Flash Point 62 °C Color and Appearance Colorless clear liquid Density 25/25°C 0.92 Refractive Index 1...

Thursday 02 November 2023

Block magnets can be called as magnet blocks, rectangle magnets, rectangular magnets and square magnets. Neodymium block magnets are made from bigger NdFeB magnets blocks by cutting processing. Rectangular neodymium magnets or neodymium square magnets are expressed by length, width, and height...

Thursday 02 November 2023

UV curing repair technology is the most effective and fast solution for pipe rehabilitation. Because of its high efficiency and low cost, UV curing repair technology is now widely used in the pipe rehabilitation industry. As one of the professional pipe rehabilitation companies in China...

Thursday 02 November 2023

HK36 and HK53 small plastic twin-screw extruders are very competitive equipment models for small batch production scale, especially for the Color Masterbatch industry. The production of masterbatch has strict requirements on equipment and process. The accurately measured powder and...

Wednesday 01 November 2023

Prix : USD 1.5-6.0 / kgs

Red transparent film is made from special raw materials and complex processing technology. In addition to good chemical properties. Red PET film refers to a type of polyester film that is colored red. This film is widely used in different industries due to its vibrant, bold color...

Wednesday 01 November 2023

Prix : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Technology Introduction of Devolatilizer Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, DODGEN has designed single-stage or...

Wednesday 01 November 2023

Prix : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Devolatilization Technology Introduction Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, Dodgen has designed single-stage or...

Friday 27 October 2023

Category： Linear Guide Rails High rigidity and high load Equal load in four directions Equipped with automatic centering ability Fully sealed dust prevention system High positioning accuracy and good reproducibility Low dust generation Excellent walking smoothness High speed and low...

Thursday 26 October 2023

Metal Wall Decor Wholesale Supplier Janmart door china metal wall decor is a complete transformation because metal art creates volume and lighting effects. Decorated in this way, this wall already has the status of a gallery wall. The advantage of metal wall decoration is that it...

Thursday 26 October 2023

Craft Decoration Items Wholesale Supplier Welcome to the JANMART DECOR craft world, here You can create Features! Find many wonderful ideas of craft decoration items. Handicrafts, each small detail is the craftsmanship of the master worker, exquisite and delicate Open home, choose...

Thursday 26 October 2023

Prix : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Thursday 26 October 2023

Prix : USD900-USD2000/MT

Lubricants improve the fluidity and demoulding of the resin. In processing, it reduces friction between resin and processing machinery, the friction between resin and resin, so that it reduces the torque to save the energy. Lubricants also increase the surface smoothness of the finished...

Thursday 26 October 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Thursday 26 October 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Wednesday 25 October 2023

Quantité : 30000 squa - Prix : 100-200RMB

custom industrial flooring is more resistant to the corrosion of dozens of chemical substances such as strong acids, alkalis, and oils than PVC flooring, while also being more wear-resistant, pressure resistant, and impact resistant. Industrial flooring is suitable for electronic...

Wednesday 25 October 2023

Quantité : 30000 squa - Prix : 100-200RMB

Epoxy coil floor products using the most advanced technology and automation equipment production, product quality is stable, diversified varieties, and low carbon environmental protection. Compared with PVC floor, epoxy floor, etc., it has excellent performance, such as super pressure resistance...

Wednesday 25 October 2023

PP white masterbatch is a polymer additive that is specially designed for polypropylene resins. It is used to enhance the properties of polypropylene-based plastic products, such as color, UV resistance, flame retardance, and antimicrobial properties. pp color masterbatch is added...

Wednesday 25 October 2023

Polyethylene hdpe masterbatch is a type of polymer additive that is used to enhance the properties of polyethylene-based plastic products. It is added to the base polymer during processing to improve properties such as color, UV resistance, flame retardance, and antimicrobial properties...

Wednesday 25 October 2023

Fluorescent Whitening Masterbatch is a type of additive used in the plastic industry to improve the whiteness and brightness of plastic products. It is also known as Optical Brightening Agents (OBAs). Fluorescent whitening agents are designed to absorb light in the ultraviolet range...

Wednesday 25 October 2023

Nucleating Masterbatch usingα-type nucleating agents can accelerate the crystallization rate of polypropylene (PP) and significantly enhance the rigidity and heat resistance of the resulting thermoplastic products. This prevents softening during boiling water heating and ensures...

Wednesday 25 October 2023

Non-woven masterbatch is a type of additive used in the production of non-woven fabrics. It is designed to improve the overall functionality, durability, and aesthetic appeal of non-woven materials. pp non woven masterbatch are typically made from a variety of thermoplastic polymers...

Wednesday 25 October 2023

Modified polyolefins are a group of materials with improved properties compared to regular polyolefins. These polymers are created by modifying the polymer structure through the addition of functional groups. acid modified polyolefin offer enhanced mechanical, thermal, and chemical...

Wednesday 25 October 2023

YG Tape's Hot Melt Adhesive series is a popular adhesive choice for a variety of applications. It's a prevalent choice for its easy application and fast drying time. Our hot melt adhesive is suitable for a large number of substrates and can be used for bonding a variety of materials...

Saturday 21 October 2023

Quantité : 10mg-10t - Prix : 50-15000

Our arbomer 940 for sale is a white loose powder. carbomer cas number 9007-20-9 is widely used for its strong thickening properties, high transparency, high viscosity, strong suspension ability, short rheology and thixotropy, and low resistance to ionic shear force. Swelling and slightly acidic...

Saturday 21 October 2023

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherketone...

Saturday 21 October 2023

With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. FAQs of Grade G PEEK Resin Pellets G Series-770G PEEK Pure Resin...

Saturday 21 October 2023

PEEK-GL series, is a glass fiber composite modified PEEK materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. FAQs of Grade GL...

Saturday 21 October 2023

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. FAQs of Grade FC Super Wear Resistant PEEK PEEK wear resistance of Grade FC Super Wear Resistant PEEK PEEK (polyetheretherketone) materials...

Saturday 14 October 2023

Microporous Coveralls provide solid protection against nonhazardous liquids and some particles. The material is constructed from 100% virgin spunbonded polypropylene inner , and in addittion the substrate with a microporous middle layer. They are breathable and comfortable in hot or wet climates...

Saturday 14 October 2023

Narrow Sanding Belts for Wood Compared with the existing market products, we have applied calcined grains for longer life and long-lasting sharpness. The sand cloth not only have good performance on hardwood grinding, but also have a good grinding effect on oily and cork wood that...

Thursday 12 October 2023

Fuji star Aluminum Oxide Sandpaper is made of selected abrasive, using special electrostatic sand planting process, made of high quality paper as the base material, through special process on its surface with synthetic resin and anti-static, anti-adhesion advanced coating. By special treatment...

Thursday 12 October 2023

Henan E-Grind Abrasives Co., Ltd is a professional manufacturer of different types of abrasive wheels and Cubic Boron Nitride (CBN) grinding wheels, which are widely used in the woodworking industry, tool making, bearing, gear, mold and die, automobile, aerospace, Semiconductor industry...

Thursday 12 October 2023

E Grind supply Dressing sticks to help you achieve maximum performance from your grinding wheel. For saving customers costs and time, we put 1 pc cbn dressing stick for each grinding wheel in the box as our standard packing. By regular use of properly selected dressing sticks, the...

Thursday 12 October 2023

Our disco diamond blade with hub is with a stronger edge, which makes the disco blade more rigid and keeps the edge not to be broken, so the cutting with the blade is in high efficiency and of excellent quality. This wheel is mainly used for the cutting and dicing wafers of silicon...

Wednesday 11 October 2023

Quantité : 1000000pcs - Prix : 0.1USD-60USD

This non-standard custom Mounted Flap Wheel is M14 Screw Hole Type, the middle hole is 14mm screw hole, and the middle of the page wheel adopts imported high-quality special glue. Due to the different use and particularity of the workpiece in industrial processing, the conventional...

Wednesday 11 October 2023

Quantité : 1000000pcs - Prix : 1000000pcs

KEYING 1000 grit flap wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust...

Wednesday 11 October 2023

Quantité : 1000000pcs - Prix : 0.1USD-60USD

KEYING 40mm flap wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust,...

Wednesday 11 October 2023

Quantité : 1000000pcs - Prix : 1000000pcs

KEYING Flap Wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust, beautiful appearance...

Tuesday 10 October 2023

Strong ndfeb disc magnet , also called Disc Neodymium Magnet, like our othersuper magnets, are made of a special NdFeB alloy, which allows ring neodymium magnet to achieve an extreme adhesive force of up to 200 kg. Their high magnetic strength, resistance to demagnetization, low cost...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

Glass Filled PTFE Gaskets PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product not only maintains the original characteristics of pure PTFE plastic, but also improves the hardness, creep resistance, abrasion resistance...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE O Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features. PTFE molded parts have corrosive medium fluid piping...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Tuesday 10 October 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Monday 09 October 2023

Two shot moulding, also calleddouble shot injection molding, double shot moulding , multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Monday 09 October 2023

Prix : USD1-1000

Kaiping healthwise's wholesale Plant extract is a natural botanical extracts formed by the natural plant as the raw material. In a bulk plant extract factory, according to the use of the extracted final product, through the physical and chemical extraction and separation process,...

Monday 09 October 2023

SLA 3D printing technology is mainly used for product prototyping at the stage of product development. As one of the 3d printing companies, uniontech 3d provide dlp material, 3d materials resin, 3d printing instant quote, materials used in 3d printing, 3d printing material, large 3d printer, etc...

Monday 09 October 2023

Multi-Purpose Resin with Optimum Toughness and Processing Speed Ultracur3D ST 45 B by Forward AM are reactive urethane photopolymers for Tough applications that delivers an excellent combination of high strength, plus long-term toughness and impact resistance. It is very well suited...

Monday 09 October 2023

Stereo lithography Appearance (SLA) is a member of the vat photopolymerization family of processes for additive manufacturing. In Stereo lithography Appearance (SLA), UV lasers are used as the light source to selectively cure a polymer resin. RSPro Series The RSPro range of stereolithography...

Monday 09 October 2023

industrial sla 3d printer A New Dimension in SLA 3D Printing RSPro600 is an industrial-grade large-format Stereolithography SLA 3D printer, compatible with a variety of 3D printing materials for small-batch printing. Provide a one-stop solution for small-batch printing with high efficiency...

Monday 09 October 2023

Large SLA 3D Printer RSPro2100 is our largest format SLA 3D machine printer. There are three laser scanning, this innovative scanning additive manufacturing system is perfectly suited for the industrial production of large, high quality finished parts as well as mass part production...

Monday 09 October 2023

Prepainted Steel coil is hot galvanized plate, hot galvanized aluminum zinc plate, galvanized plate and other substrates, the surface pretreatment (chemical degreasing and chemical conversion treatment), on the surface coated with a layer or several layers of organic coating and then...

Sunday 08 October 2023

Self-Adhesive LSR is a type of liquid silicone rubber specifically designed for applications where a permanent bond is required between two surfaces. It has a unique ability to bond to many different substrates, making it a popular choice for a variety of industries. Self-Adhesive...

Sunday 08 October 2023

BTL Silane Coupling Agent is a specialty chemical used to improve the performance of polymers composites by increasing the bond strength between the resin and the filler. It is a chemical compound made up of Si-O-Si bonds, which act as a bridge between two materials, allowing them...

Friday 29 September 2023

With the help of a technology development team for professional printed circuit board manufacturers, HUIHE Circuits has mastered advanced technology in the PCB industry, our PCB company own reliable production equipment, test machine and fully functional P&C lab. Our printing...

Thursday 28 September 2023

CBB60 motor run capacitor utilize low-loss metalized polypropylene film for dielectric. The CBB60 motor run capacitors are encapsulated with resin and housed in a self-extinguishing plastic case which allows for superior reliability and a high mechanical shock and vibration strength...

Thursday 28 September 2023

cbb 16 Welding Inverter DC Filter Capacitor's Application： 1. Used in filter, absorption, blocking, and resonance circuits of high-frequency switching power supply. 2. Widely applied to EMI, such as high-frequency welding inverters, UPS, electric vehicles, etc. Features of IGBT snubber...

Thursday 28 September 2023

BB15 Welding Inverter DC Filter Capacitor's Application: 1. Used in filter, absorption, blocking, and resonance circuits of high-frequency switching power supply. 2. Widely applied to EMI, such as high-frequency welding inverters, UPS, electric vehicles, etc. Features of cbb 15 Welding...

Thursday 28 September 2023

Prix : 200USD-800USD

HPL Doors are also known as hospital patient room door or high-pressure laminate room door with simple structure and installation systems. The patient room door is being widely used in many places such as hospital rooms, medical centers, healthcare centers, or electronic factories...

Thursday 28 September 2023

It is one of the hot glue sticks types that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a hot melt glue gun. The glue is squeezed out of the heated nozzle and remains sticky, and solidifies in a few seconds to one minute. There are...

Wednesday 27 September 2023

Suitable for fabric soft smooth finish [General properties] Appearance: white with blue emulsion Ionicity: cation Solubility: dilute with water at any ratio centrifugal stability（3000r/min）：≥15min。 [Product features] This product is mainly used for polyester thread after dyed soft finishing...

Wednesday 27 September 2023

Our plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins. As a precision...

Wednesday 27 September 2023

Prix : 200,000 USD~1,500,00

Tool Steel Additive Manufacturing Maraging Steel is an ideal material for many industries, like tooling industries. Eplus3D's maraging steel powders include 18Ni300/1.2709 and 13Ni400. These powders have been tested for use on Eplus3D's 3d metal printer. Eplus3D also offers a wide...

Wednesday 27 September 2023

Prix : 200,000 USD~1,500,00

Eplus3D Polymer 3D SLS Aluminium Printing Machines and Materials For Your Needs Eplus3D SLS polymer 3D printers are flexible machines for industrial grade production and research. We also provide advanced processes for industrial SLS 3D printing with the most various polymer materials optional...

Wednesday 27 September 2023

Prix : 200,000 USD~1,500,00

EP-A650 3D Metal Printer Stereo Lithography is developed by Eplus3D, which is professional in 3D EP printing technology. The system is user-friendly with high stability, care-free maintenance, and perfect printing results. Feel free to reach out to us to learn more details about the...

Tuesday 26 September 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Tuesday 26 September 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Tuesday 26 September 2023

Why Nylon Has High Tensile Strength Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering PlasticsUsing Polyamide 66 as the basic resin, the nylon 66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength...

Tuesday 26 September 2023

Nylon66 PA66FR Halogen-free FR (A2005X01) for Engineering Plastics Flame-retardant PA66 is a halogen-free flame retardant engineering plastic made of nylon 66 resin as a base material (other fibers can also be added), mixed and extruded. Typical Application of Nylon66 PA66 Halogen-free...

Saturday 16 September 2023

Quantité : 1SET - Prix : 0-50k USD

RayCure SPE series provides high-quality SPE cartridges for various types of solid phase extraction, including manifold, vacuum as well as automated solid phase extraction equipment, well compatible with RayKol automated solid-phase extraction systems. RayCure SPE cartridges utilize...

Saturday 16 September 2023

Quantité : 1SET - Prix : 0-50k USD

RayCure SPE series provide pre-packed SPE columns with a variety of sorbents, resins and cartridge size for various methods and target analytes. There are four types of RayCure SPE categorized by its polarity and ion exchange capacity, normal phase SPE columns, solid phase extraction column...

Saturday 16 September 2023

Prix : USD 1.00~USD50.00

Transparent Plastic Pipe Tube PVC, Clear Transparent Rigid PVC Pipe Tube Price Clear PVC pipes, commonly referred to as transparent plastic , are offered in a variety of standards, including ASTM, DIN, and ANSI. The 1 inch transparent pipe is used for the chemical pipeline protection...

Wednesday 13 September 2023

Quantité : Monthly pr - Prix : Ranging from 200,000

A fully Automatic solar laminator machine is the most important process in the whole solar panel production line. Solar module lamination is used to bond multiple layers of materials (Glass, EVA, Solar cell, Backsheet) together by heating &vacuum process in chambers of the laminator...

Tuesday 12 September 2023

Quantité : 10000T/yea - Prix : US$0.1-US$1

The plastic hot and cold drink lids from plastic lids factory Honokage is made from PP material, which is food grade and 100% recyclable, not only includes 90mm lid and 80mm lid, milk tea drink lid and coffee cup matched lid, also including manual cover lid and Self Service Machine...

Tuesday 12 September 2023

Quantité : 10000T/yea - Prix : US$0.1-US$1

IML container for packing yogurt made from 100% polypropylene (PP) by yogurt cup supplier Honokage, therefore is 100% recyclable, IML decoration allows optimal branding and photographic quality printing. IML Yogurt Cup For Sale Plastic IML yogurt cup from Honokage is lightweight 20%...

Tuesday 12 September 2023

What Is Brown Fused Alumina? Brown fused alumina chemical composition is a versatile product available in various forms. It includes brown fused alumina for abrasive, brown fused alumina for refractory, and high temperature treated BFA. Known for its high hardness and toughness,...

Tuesday 12 September 2023

Black Fused Alumina is a specialized type of fused alumina with a distinct black color. It is made by high-temperature smelting of selected bauxite ores and coal as reducing agents. This material exhibits high hardness, excellent thermal stability, and good electrical conductivity...

Tuesday 12 September 2023

Quantité : 30000pcs/m - Prix : $10-$1500

Compact, Portable, and Accessible, all these features have been indicated in each design for Duoyes Wicker Outdoor Folding Chairs Collection, whether it's a vintage foldout chaise lounge or a wicker folding dining chair, or even just a wicker folding stool, it can always be a smart...

Friday 08 September 2023

TTA-15 is an specialty resin chemical epoxy acrylate with an unsaturated alicyclic structure, mainly used after modification, and can be cured both by UV and thermal, therefore more options for users in the synthesis of resin applications. Specifications of Tetrachem TTA15 (cas 82428...)

Friday 08 September 2023

TTA16 has the feature of low viscosity, heat resistance, weather resistance, and electrically insulating. Due to the unsaturated bonds of specialtyresins and acrylates, TTA16 has the characteristics of epoxy resins and acrylic resins and can be cured with a variety of curing methods...

Friday 08 September 2023

As the typical cycloaliphatic epoxy resin, TTA21 (3 4 epoxycyclohexylmethyl formic acid-3 ', 4' - epoxycyclohexyl methyl ester)has strong dilution ability, high Tg, good adhesion on a variety of substrates, low shrinkage and oxygen free polymerization inhibition. Contact Tetra for...

Friday 08 September 2023

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Friday 08 September 2023

Tetra special epoxy resin offers two product categories with cycloaliphatic epoxy resin and glycidyl amine epoxy resin. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely...

Thursday 07 September 2023

Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, special coatings...

Thursday 07 September 2023

Huge dental flexible block is made from strong and biocompatible nylon resin. This product is a new material to fabricate the partial denture framework, which is more natural and comfortable choice for customer. Parameter of Flexible Blocks Value/Unit Flexural strength >30Mpa...

Thursday 07 September 2023

For making denture bases, Hugedental offers a series of Denture Base Polymers with different curing types and shades to fulfill the needs of lab technicians. The product is featured with various benefits like natural beauty, drop resistance, no bubbles, etc. The product is composed...

Thursday 07 September 2023

HUGE offers a vast range of restorative materials, including pre-treatment products, dental resin cement, composite restorative materials, which could be matched to complete the restoration procedure including adhesive resin cement solution, composite restorative solution, aesthetic...

Thursday 07 September 2023

Centering on Synthetic Polymer Teeth, HUGE Dental has been a top dental lab material supplier and provides a set of comprehensive dental laboratory supply solutions for our customers, which is supplemented by Light Curing Tray Material, Silicone Duplicating Materials in dentistry...

Thursday 07 September 2023

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Thursday 07 September 2023

E-Grind's metal bond micron products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder: for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond for Sale Micron Diamond Powder...

Thursday 07 September 2023

E-Grind's metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone Metal Mesh Bond Diamond for Sale Metal Bond Mesh Diamond: EA-M19...

Thursday 07 September 2023

TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping...

Wednesday 06 September 2023

Moisture curing epoxy asphalt paint is composed of special epoxy resin, coal tar pitch, anti-corrosion pigments and fillers, water-increasing additives, accelerators, emulsifiers, and solvents. It adopts a moisture-reactive cross-linking curing agent. Two-component packaging. It can...

Wednesday 06 September 2023

Quantité : 1000000 - Prix : $0.2-0.9

Bulk custom sports medals from Pinstar, one of the leading high-quality sports medals suppliers in China. As one of the leading sports medal suppliers in China, Pinstar specializes in providing top-notch customized sports medals at affordable prices. Whether you need medals for a...

Wednesday 06 September 2023

Prix : USD 150- 600

Titanium Membrane Module JIU WU company designs the module with Titanium material. The main application of titanium module is brine filtration. The module is a complete unit composed of the ceramic membranes, housing, feed inlet, concentrate outlet, and permeate outlet. The ceramic...

Wednesday 06 September 2023

Prix : USD 150- 600

The stainless steel membrane module is designed by different applications. Stainless steel could be used as the material of module/housing, that is, ss membrane housing. Jiuwu hi tech company could produce the extra large stainless steel membrane housing as customer demand, such as...

Tuesday 05 September 2023

Quantité : 1 kg - Prix : 5 EURO

Le parfum bois de Oud possède une complexité, une richesse et une envoutante odeur. La qualité boisée profonde et résineuse est la principale caractéristique du bois de Oud. Cette odeur évoque la richesse des forêts, la complexité des essences de bois, ainsi que des nuances terreuses et sombres...

Tuesday 05 September 2023

Quantité : 1 kg - Prix : 5 EURO

Le Bakhour, ou Bakhoor, est un mélange traditionnel d'abord de bois de oud (agarwood), puis de résines, d'épices et d'huiles essentielles. La note de Bakhour d'Arabie est marquée par un riche arôme boisé, principalement en raison de la présence du bois de oud. Provenant des traditions...

Tuesday 05 September 2023

Quantité : 1 kg - Prix : 5 EURO

La principale caractéristique de la note d'ambre est sa chaleur enveloppante. Elle évoque des sensations de réconfort et de douceur, en créant une ambiance chaleureuse et réconfortante. La note d'ambre possède une qualité balsamique et résineuse, provenant de l'utilisation de résines...

Tuesday 05 September 2023

Prix : 7,50 €

Multiple Dolls, Little Girls, Plastic Princess Dolls A 30cm doll with many types There are white, black, and yellow dolls Human shaped toys for children to play with Choose your favorite doll here If you can't find the desired doll, you can also find the webmaster to customize the doll Dolls...

Friday 01 September 2023

What Is SMC Plastic? SMC, BMC thermosetting plastic products are produced by BMC SMC plastic molding process. BMC/SMC Motor Plastic SMC/BMC edging motor change the traditional material of iron and aluminum to reduces the process but seals more. High-Voltage Electrical Products Mainly...

Friday 01 September 2023

BMC/SMC Electric Motors Description Motor BMC replaces traditional iron and aluminum, reduces the process, seals more, and has higher safety factor. It mainly refers to white goods and public motors. High insulation, chemical resistance, high fire resistance, good water resistance...

Thursday 31 August 2023

Mosaic Tiles Factory Janmart mosaic offers different materials mosaic. All small chips combine with a variety of patterns and styles.Mosaic shape can be a sheet can be a picture, as one of mosaic tile wholesale suppliers, we have our design team do every season new, and also can do...

Thursday 31 August 2023

Wall Mirror Factory,Wall Mirror Company When doing home decoration, it is no longer limited to traditional decoration materials. More and more people are beginning to use new materials, among which mirror materials are one of the new materials that people like. Find beautiful and...

Thursday 31 August 2023

Metal Wall Decor Supplier,Metal Wall Decor Factory, Metal Wall Decor Manufacturer Janmart china metal wall decor decoration is a complete transformation because metal art creates volume and lighting effects. Decorated in this way, this wall already has the status of a gallery wall...

Tuesday 29 August 2023

Quantité : 80000000 c - Prix : US$0.5-US$2

7CF® non toxic black spray paint, non toxic acrylic spray paint is a quick-drying benzene-free thermoplastic acrylic resin aerosol paint. It is made of special acrylic resin, pigment additives and solvents free of benzene and toluene, combined with advanced production technology...

Tuesday 29 August 2023

Prix : USD0.5-15000

Now more and more people pay attention to oral and dental health. Go back to do oral care and health care when there are problems with human teeth. The problem of tooth irregularity has also become the focus of attention. Now for the problem of people's irregular teeth, more and more...

Tuesday 29 August 2023

Plastic machinery parts, to put it more precisely, are parts for plastic auxiliary equipment and central loading system. The machinery and system need to be used and maintained properly just like all other products. As time goes on, some parts may be susceptible to abrasion. These...

Friday 25 August 2023

PSPL Series Avoid pollution and external mechanical force, flexible contact Suitable for fast handling in small space Resistant to environment, corrosion, and abrasion Reduce metal dust, special for dust-free working condition During the operation, the hose is static and without...

Friday 25 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

Color Masterbatch for Engineering Plastics As an engineering plastic company, Anmei serves customers with tailored-making solutions from standard colors to customized colors and functions. There are different types of colour master batch such as white masterbatch, black masterbatch...

Friday 25 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

Antiblock masterbatch for Engineering Plastics Anmei, one of the professional plastic master batch manufacturers, has a range of customized masterbatches available which incorporate antistatic masterbatch, for use in different polymers and applications. It is to prevent unbearable...

Friday 25 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

Antibacterial Masterbatch for Engineering Plastics Polymer anti-bacterial masterbatch is a kind of masterbatch material that adds antibacterial agents into the carrier resin, which is offering antimicrobial protection for plastic products and reduces the growth of harmful organisms such as molds...

Thursday 24 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of polybutadiene....

Thursday 24 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

ANMEI, YOUR PROFESSIONAL PLASTIC SUPPLIER! Contact US TODAY ANMEI focuses on supplying the 5G New energy and intelligence appliance market with engineering plastics and color masterbatch china. We develop and keep innovations to provide customized services on supplying modified plastics PA6GF...

Thursday 24 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material...

Thursday 24 August 2023

Quantité : 1000t/m - Prix : 25kg/bag

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables...

Thursday 24 August 2023

Quantité : 1000kg - Prix : 400-800CNY

PEEK-CA series reinforced plastics filled with carbon fiber, high elastic modulus, mechanical strength, creep resistance, wear resistance and dynamic fatigue resistance. Types of Grade CA Carbon Fibre PEEK ZYPEEK Supplier CA Series-770CA30 PEEK Carbon Fiber Reinforcement CA Series-550CA30...

Thursday 24 August 2023

Quantité : 1000kg - Prix : 400-800CNY

CA Series-550CA30 PEEK carbon fiber reinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly increased the material's wear resistance and high temperature mechanical strength, thermal conductivity is pure resin G series 3 times...

Thursday 24 August 2023

Quantité : Carton - Prix : 400-800CNY

PEEK polymer raw material is a kind of semicrystalline aromatic polvmer and its main chain of macromole is consist of arvl. ketone, and ether. PEEK plastic raw material has the properties of heat resistance, chemical stability as thermosetting plastics, and good processability as thermoplastics...

Wednesday 23 August 2023

For parts with complex structure, stainless steel 3d printing service can realize integral printing forming, avoiding mass increase and potential quality defects caused by welding forming a complex part after disassembling and manufacturing, and even canceling the assembly of complex parts...

Wednesday 23 August 2023

SLA printing is focused on the surface of a light cured material, which is solidified from point to line and line to surface. SLA printing of SLA 3d printing companies Proto Mold enables a wide selection of materials, extremely high feature resolution and high quality surface treatment...

Wednesday 23 August 2023

EDI is a pure water manufacturing technology that combines ion exchange technology, ion exchange membrane technology and ion electromigration technology. It skillfully combines electrodialysis and ion exchange technology, uses high voltage of electrodes at both ends to move charged ions in water...

Wednesday 23 August 2023

EDI module is usually placed behind the reverse osmosis system, which not only overcomes the lack of deep desalination of reverse osmosis effluent, but also further removes trace carbon dioxide, residual salt, silicon dioxide, boron and total organic carbon plasma in RO water, greatly...

Tuesday 22 August 2023

What is FR4? FR4 is the name of a type of epoxy glazing material. fr stands for flame retardant. 4 refers to the factors that differentiate it from other materials. FR4 means two things. The material. As a construction material, it refers to epoxy laminates reinforced with glass fibers...

Tuesday 22 August 2023

Prix : USD1500 to USD3000

It is mainly used as plasticizer for producing unsaturated polyester resin, additive for high-grade lubricating oil, and also as polymerization inhibitor, stabilizer and insecticide. Neopentyl Glycol CAS No 126 30 7 Basic Information Product Name Neopentyl Glycol Multiple Names 2...

Tuesday 22 August 2023

Prix : USD1500 to USD3000

This product is non-toxic plasticizer, which can be used as plasticizer of PVC, cellulose resin and synthetic rubber. For non-toxic PVC granulation, food packaging containers, children's toys, medical products, films, plates, cellulose coatings and other products. Acetyl Tributyl...

Tuesday 22 August 2023

Prix : USD1500 to USD3000

Propylene glycol can be used in the manufacture of unsaturated polyester, liquid saturated polyester, thermoplastic polyester resin (PET and PBT modification), alkyd resin, polyurethane resin, double ester type plasticizer, lubricant, also used in cosmetics, pharmaceuticals, etc...

Tuesday 22 August 2023

Shijin watch has devoted itself to wooden watches for years. As the leading wood watch factory in China, we have implemented an innovation that we combine the wood with stainless steel as the original material of watches by rich experiences in horology and professional in-house wood...

Tuesday 22 August 2023

As a leading printing consumables manufacturer with over 42 years of experience, Print-Rite is dedicated to delivering innovative, patent-safe, high-quality, and eco-friendly products. Our consumables are designed to meet the most rigorous safety standards, ensuring that you can print...

Tuesday 22 August 2023

Looking for a high-quality, affordable printing solution direct from printer ribbon supplier and printer ribbon manufacturer? Print Rite printer ribbon delivers crisp, clear prints with every use. We have wax resin ribbon, thermal printer ribbon, label printer ribbon, printer tape...

Thursday 10 August 2023

Quantité : 100pcs - Prix : USD0.10 -USD2.5/PCS

An oil filter is a filter designed to remove particals and contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Their primary use is in internal-combustion engines for motor vehicles (both on- and off-road ), powered aircraft, railway locomotives, ships and boats...

Tuesday 08 August 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret vinyl tape is made of soft polyvinyl chloride (PVC) film as the base material, coated with rubber pressure sensitive adhesive, with good insulation, flame resistance, voltage resistance, cold resistance and other characteristics, suitable for automobile wiring, wire winding...

Tuesday 08 August 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret so-called vinyl electrical tape is used a lot for wrapping the wire harness, so it is also called PVC wire harness tape. Important to realize, the main difference with non-adhesive pvc tape is about the glue. The base material is pure PVC resin and coated with aggressive synthetic...

Tuesday 08 August 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Polyethylene fiber mesh laminated with foil is very popular in HVAC industry. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It can be either easy tear or hard tear as per customers requirements...

Tuesday 08 August 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret so-called pvc pipe wrap tape is used a lot for wrapping air ducts, so it is also called PVC pipe wrap tape. Important to realize, the main difference with non adhesive pvc tape is about the glue. The base material is pure PVC resin, and coated with aggressive synthetic rubber adhesive...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Insert molding service is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on. Feel free to check out the injection...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Tuesday 08 August 2023

We can provide you with up to 64 layers, 12oz copper, HDI, high frequency, high TG, flex, MC pcb from prototype to mass production. As a rigid pcb manufacturer, Fastlink Electronics offers the highest quality printed circuit boards at the most competitive pricing. Whether you need...

Tuesday 08 August 2023

On the mounted flap wheel for drill, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth...

Tuesday 08 August 2023

The flexibility of 8 inch flap wheel enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material through a resin adhesive. Flap Wheel 3/8inch Specification: Diameter: 3/8 inch=10mm Max. RPM: 25000 RPM Raw Materials...

Tuesday 08 August 2023

On the mounted abrasive flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Tuesday 08 August 2023

On the Mounted Small Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Tuesday 08 August 2023

On the Mounted Emery Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...