TINS - 864 Annonces

Wednesday 05 July 2023

C70600 tube/pipe using UNS C70600 copper nickel alloy is primarily used in seawater service as forged and machined valve and pump components, fittings, and hardware. The alloy UNS C70600 pipe is also used in applications where high corrosion resistance is required, and where chloride...

Tuesday 04 July 2023

For capsule pressure gauges, we have bottom connection, back connection, back with U-clamp connection vacuum gages, vacuum gauge etc series for your choice, also some capsule gauges is suitable for medical use. Specifications: Specifications: of 2.5 Inch Medical Capsule Low Pressure...

Tuesday 04 July 2023

2.5 inch diameter low u clamp pressure gauge, steel material, back connection with u-clamp, suitable for the low pressure equipment. Specifications: Specifications of 2.5 Inch Medical Capsule Low Black Steel Back Entry Low Pressure Indicator With U-Clamp Dial: 1.5"(40mm),2.5" (63mm)...

Friday 30 June 2023

Tinplate Tinplates are a light gauge, cold-reduced low-carbon steel sheet or strip, coated on both faces with commercially pure tin. Hot Dip Zn-AL-MG Alloy Coated Steel OVERVIEW OF ZAM ALLOY COATED STEELHot dip Zn-AL-MG alloy coated steel, also known as ZAM steel, is a new type of...

Thursday 29 June 2023

Prix : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Wednesday 28 June 2023

Product characteristics 1. PCB materials: FR-4 2. SMD: LEDs, resistors, connector, LCD, LED displays, sensor, speaker 3. Lower resistance and higher conductivity 4. Soldering many different kinds of components 5. Thru-Hole technology to utilize both sides of PCB 6. Plating Type: Gold...

Wednesday 28 June 2023

Description of Tinplate Sheet Tinplate sheet refers to the two sides coated with commercially pure tin cold rolled low carbon sheet or steel strip. Tinplate steel sheet is the low carbon steel rolled into steel plate, after pickling, cold rolling, electrolytic cleaning annealing, leveling...

Wednesday 28 June 2023

Description of tinplate steel coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion resistance to steel substrates and preservation of fast and canned foods. Also, the surface of tinplate is suitable for printing and screen printing...

Friday 16 June 2023

Quantité : 1-5000 set - Prix : $1,000~$50,000

Gas leak camera is an instrumentation tool for gas leakage detection. Below are two of our featured gas leak cameras. Optical Gas Imaging Cameras TI320+ ULIRVISION TI320+ is with cooled detector (QWIP, NETD<25mK) to detect gas leaks and pinpoint the gas leaks location accurately...

Thursday 08 June 2023

Quantité : 200 tons - Prix : 25usd-100usd

Ferroalloy is a general term for alloys composed of iron and silicon, manganese, chromium, titanium, tungsten, molybdenum, tantalum, niobium and other elements. It cannot be used to cast parts directly, but only as a reducing agent or additive in the casting or steelmaking process...

Saturday 03 June 2023

Prix : USD 1-5

Tin Can Strainer The strainer is built in long steel pipe. We can weld steel pipe to the strainer or assemble KC nipple to the strainer. The application of the strainer 1. Chemical products 2. Foodstuffs and spices (milk powder, coffee, tea, rice, grains) 3. Stones and powders (minerals...)

Friday 02 June 2023

Fixing agent for acid dyes will be deposited on the surface of the fiber, plugging the pores of acidic dyes dissolved again, thus reducing the possibility of fading, and generally improving the color fastness 1 ~ 1.5. Based on this, the solid color of the impregnation method is used...

Wednesday 31 May 2023

Prix : 100USD

Half Hole & Through Hole Pcb Through hole circuit board & half hole PCB, no copper burr residue or warpage in half hole, reduce connectors and save space, apply to Bluetooth module and Signal receiver products. HUIHE CIRCUITS PCB board with holes apply to Bluetooth module...

Friday 12 May 2023

Quantité : 1000，000pc - Prix : 1-1000USD

Thanks to its efficient AGM technology, EXOR provides 12V260AH Truck Batteries for trucks and commercial vehicles that are highly dependent on onboard equipment. This is a battery that can be used to unlock the most demanding applications and power-hungry features (including parking...)

Friday 12 May 2023

Quantité : 1000，000pc - Prix : 1-1000USD

12V230AH extra heavy duty car battery, using the latest plate stamping technology, higher strength, and higher density, makes this battery three times longer than the regular starter battery. The high tin alloy plate has smaller internal conduction loss, and the internal resistance...

Thursday 11 May 2023

Maximum electrical rating of insulated terminal lugs: 600volts Maximum temperature of insulated ring: 75℃ Terminal Body of insulated ring lugs: The terminal body of insulated ring type lugs is made of Brass or Copper Plating of ring terminal insulated： Tin plated Insulation material...

Thursday 11 May 2023

The optical isolation terminal has the advantages of low signal loss at the control end, high switching frequency, no mechanical contact jitter, no wear switching, high insulation voltage, no vibration, no positional influence, and long life. Therefore, male disconnect terminal is...

Thursday 11 May 2023

Utilize the existing track-type terminal RTB connection technology, and install a circuit composed of electronic components to realize the transmission coupling of the photoelectric process. The core of automatic control is that the control unit must be reliably isolated from the...

Sunday 07 May 2023

Quantité : 100k - Prix : $0.005-$3.4

Card edge connectors are one of the original devices used to provide an easy, high-speed transmission of data and communication. These edge card connectors provide low resistance, robust interconnect solutions at a low price. Card edge connectors are available in an extensive array...

Sunday 07 May 2023

Quantité : 100k - Prix : $0.005-$3.4

PCB board to board connectors and SMD board to board connectors are used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility...

Saturday 06 May 2023

Magnetic eddy current separator machine is also known as non-ferrous separators, which uses the induction principle (eddy current) of a high-frequency magnetic field to separate non-ferrous metals. High-capacity permanent magnet drum traveling at a high speed inside an eddy current...

Saturday 29 April 2023

Quantité : 0 PCS-1000 - Prix : 1 USD/set ~ 300 USD/

PCB surface finish include: PCB surface finish is a coating between a component and a bare board PCB. It is applied for two basic reasons: to ensure solderability, and to protect exposed copper circuitry. As there are many types of surface finishes, selecting the right one is no easy task...

Saturday 29 April 2023

Quantité : 0 PCS-1000 - Prix : 1 USD/set ~ 300 USD/

PCB Capability GreensTone has successfully served customers with PCB manufacturing service in communication, industial devices, new engrgy, power supply, sensors, smart home applications control, smart industial control , medical devices and security control device and so on. GreensTone...

Saturday 29 April 2023

Quantité : 0 PCS-1000 - Prix : 1 USD/set ~ 300 USD/

GreensTone specializes in the PCB assemblies, including: Circuit board pcba assembly Surface mount technologies (SMT) Pin Through Hole Complex secondary operations Automated conformal coating Inspection Automated optical inspection (AOI) GreensTone conducts upfront evaluations of all components...

Saturday 29 April 2023

Steel Wire Forms We also offer a wide range of finishing options on most fabrications including meeting OEM specifications or industry standards. Finishing options frequently include e-coating, powder coatings, passivation, heat treatment, hardening, neutral treatments, and a variety...

Friday 28 April 2023

Quantité : USP 3000 - Prix : USD 1-5

Material: brass Threads: BSP, NPT, NPSM, NST, NPSH and so on Size: 1/4" -1" Finish And Coating: Brass Natural, Nickel Plated, Tin Plated or any coating as per customer specification. Any type of Brass Hose Barb Fittings, Brass Hose Nuts, Brass Hose Line Connectors can be produced...

Friday 28 April 2023

BOYA metal cut to length machine is often used in steel rolling production line. In the continuous rolling billet workshop or small section workshop, it is placed at the end of the rolling line to cut the rolled pieces into fixed length or only the head or end of cutting part. In...

Thursday 27 April 2023

Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper content of 56%~68% is 934~967 degrees. Brass has excellent mechanical properties and abrasion resistance. So brass is a good material for manufacturing custom brass cnc machining parts...

Thursday 27 April 2023

Prix : 30--45 dollars

While floating through the molten tin, the combination of gravity and surface tension results in smooth and flat surfaces on both sides. a) Smooth and flat surface and good vision. b) Excellent optical performance. c) Stable chemical properties. d) Resistant to acid, alkaline, and corrosion...

Saturday 22 April 2023

Quantité : 1-100,000 - Prix : $1-$10

This is the cnc machining metal parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 67mm*49mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Surface Treatments of machining metal parts Aluminum Powder Coating, Brushing...