STANDARD” - 20762 Annonces

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

Type1 Portable EV Charging Cable The cable conforms to the SAE Standard (USA) of EV Charging, which suits electric vehicles manufactured in America. As mostly customer had asked, it has a unique design that one button attached with a hole (reserved for the electronic lock to avoid...)

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

Our type 1 charging cable conforms to the SAE Standard (USA) of EV Charging, which suits electric vehicles manufactured in America. As most customers had asked, it has a unique design that one button is attached with a hole (reserved for the electronic lock to avoid stealing) on the...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

Electric Vehicle Charging Socket from JAYUAN EV charging connector needs to be attached to the wall-mounted EV charging socket types or fixed charging station EV socket types to charge the vehicle. There are different standards of the EV charger sockets between Europe, USA, China and Japan...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

JAYUAN Electric Vehicle Charging Adapter As a professional electric car charger adapter manufacturer, JAYUAN provides different types of ev charging adaptors for various chargers as GBT EV charger, type 1 commercial car chargers and so on. The main purpose of the EV charger adapters...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

EV/Electric Vehicle Charging Cables from JAYUAN There are normally two electric car cable types. One of the EV charging cable types is Mode 2, which means it is a portable single-connector with a controller board and plug; The other one of electric vehicle charging cable types is Mode 3...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

JAYUAN EV Charging Products Jayuan ev charging accessories is the main branch of Jayuan Solution. It is an organized lineup of marketing channel and technique service. Jayuan electric car charging solutions provides a series of ev charging products including: Portable, Mobile EV Charging Box...

Saturday 18 May 2024

The frequency converter is also called voltage and frequency converter. CCS has mastered the most advanced frequency conversion speed regulation technology. We can provide customers with solid state frequency converter, high ingress protection transformation converter, and explosion-proof...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

SAE EV Charging Socket SAE car charging socket is mainly used to connect the vehicle for charging during maintenance purpose. It's mostly used for the manufacturing industry and auto service providers. SAE socket adapts fast-charging system as well as normal charging system depending...

Saturday 18 May 2024

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

IEC Dummy Socket IEC Dummy Socket is designed by Jayuan Technology Department own. We learned some spirit from the existing Europe Standard EV Charging Socket, and make it easier to do every step that required. The core of Jayuan IEC Dummy Socket is SIMPLE. The iec 62196 socket can...

Saturday 18 May 2024

Vis pour panneaux de particules et vis autotaraudeuses (DIN, ANSI, ASME) Localisation : Vietnam Singapore industrial Park ll, Binh Duong Industrial - Service - Urban Complex, Hoa Phu Ward, Thu Dau Mot City, Binh Duong Province, 72000 Thu Dau Mot, Personne à contacter : Anna Du, 0086...

Saturday 18 May 2024

Vis pour panneaux de particules et vis autotaraudeuses (DIN, ANSI, ASME) Fabricants vietnamiens. info(at)wanfangwj.com Localisation : Vietnam Singapore industrial Park ll, Binh Duong Industrial - Service - Urban Complex, Hoa Phu Ward, Thu Dau Mot City, Binh Duong Province, 72000 Thu Dau Mot...

Saturday 18 May 2024

Vis pour panneaux de particules et vis autotaraudeuses (DIN, ANSI, ASME) Diamètres De m2.5 (#4) à m6.3 (#14) Longueur De 10mm (3 / 8 ") à 180mm (7") Couche de finition Galvanisé jaune / phosphate noir ou gris / galvanisé noir / laiton / nickelé / ruspert / dacro Norme DIN...

Wednesday 15 May 2024

Quantité : 20 million - Prix : 0.06-1 USD/set

Steel drum lid clamps also known as lever latches are essential components for drum lock ring , it provides a convenient operating solution for open head drum users. Customers simply need to pull or push the clamp handle to open or close the drum ring, no tool is needed while operating...

Wednesday 15 May 2024

Quantité : 20 million - Prix : 0.06-1 USD/set

Metal tab seal for drums, as know as tab seal, is generally made from tinplate material, sometimes specially aluminum material by request. The standard size is 2'' and 3/4'', sometimes by saying "70mm and 35mm" or "50mm and 20mm". The thickness and surface design of the metal drum...

Wednesday 15 May 2024

Quantité : 20 million - Prix : 0.06-1 USD/set

Drum lock ring is a reliable sealing component for open head steel drum, open head plastic drum and fibre drum. The plastic drum locking ring and steel drum locking ring seal the drum lid and drum body by hooping them together. Drum locking rings usually vary in diameter, thickness...

Wednesday 15 May 2024

The threaded sealing cap prevents liquid from leaking and can store high-purity reagents and standard samples in a sealed manner for a long time. It is widely used for digestion of new semiconductor material experimental samples and sample dissolution at medium and low pressures,...

Wednesday 15 May 2024

Bismaleimide CAS No 13676 54 5 Wholesale & Bulk It can be used to produce electrical insulation materials, wear-resistant materials, reinforced plastic additives, rubber cross-linking agents, aviation structural materials, aerospace structural materials, functional materials, etc...

Wednesday 15 May 2024

Betaine CAS No. 107-43-7 Wholesale & Bulk Feed grade anhydrous betaine can be used as a feed additive. It is a natural and efficient methyl donor, which can partially replace methionine and choline chloride, reduce feed cost, reduce back fat of pigs, and improve lean meat rate...

Wednesday 15 May 2024

Benzoic Acid CAS 65-85-0 Wholesale & Bulk It is a commonly used antiseptic and fresh-keeping agent, which can be used in food essence, as well as as a mordant for dyeing and printing. Benzoic Acid CAS No 65 85 0 Basic Information Multiple Names: Benzoic Acid; Melting Point Standard...

Wednesday 15 May 2024

Benzisothiazolinone CAS No. 2634-33-5 Wholesale & Bulk BIT is a simple isothiazolinone derivative. Because of its good thermal stability (thermal decomposition temperature up to 300℃), is conducive to anti-corrosion. Benzisothiazolinone CAS Number 2634 33 5 Basic Information Product...

Friday 10 May 2024

Prix : 100USD

Wall Liner Paper For Wallpaper Factory Our paintable wall liner offers unparalleled functionality and organization for wallpaper factories and building materials distributors. Made from high-quality materials, the wallpaper's minimalist and sleek design elevates both the practicality...

Friday 10 May 2024

Quantité : 1 - Prix : $42.00

The most advanced disposable IGET Legends device, with 4000+ puffs, is the most advanced yet. With its ergonomic mouthpiece and metal body, it is a flawlessly classy device. The entire body is made of premium aluminum, keeping the flavours fresh to a high standard. Product Features...

Friday 10 May 2024

A 1/4-inch conduit can be connected to the lid to connect other reaction devices. PFA reaction bottles can store standard reagents for a long time, and large-capacity reaction bottles can be used for cleaning containers. #reactionbottle #Vialscleaningvessel #samplepreparation #teflonlabware...

Friday 10 May 2024

Life Science Translation Willingjet provides premium translation services for pharmaceutical, biotech, and medical device companies and CROs with high-quality. We have provided language solutions to the life science industry for more than two decades, our professional experts and...

Friday 10 May 2024

RFAW20 High-Speed Assembly Cone Winding Machine This product is a new assembly winder machine with a grooved drum that is based on the original model and optimizes the yarn guiding path. The product can be used to combine 2~3 strands of cotton, hemp, wool, and partial blending yarns...

Friday 10 May 2024

RF310 Filament Fiber Two-For-One Twister Since the launch of the first set two for one twister in 1993, we have sold more than 3.5 million spindles. Strict requirements for quality allow RIFA two-for-one twister with "high stability", "high efficiency" and "high quality" to have...

Friday 10 May 2024

Needle Punched Non Woven Needle Punching Machine The Needle Punched Non-woven Fabrics Production Line from RIFA is an advanced system designed for the production of high-quality non-woven fabrics. This line uses a needle punching process, which mechanically entangles fibers to create...

Friday 10 May 2024

RFAD10 Full-Automatic Drawing-In Machine RFAD10 full-automatic drawing-in machine is a kind of drawing-in equipment based on seed yarn mode. Drawing-in is not related to the loom beam, so pre-drawing can be conducted in advance, pre-drawing is parallel to the previous preparation procedure...

Friday 10 May 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Thursday 09 May 2024

The mouth is 24mm and can be inserted into a PFA condenser tube with a standard mouth for experiments. It is often used in experiments with hydrofluoric acid or hydrogen fluoride, and can be used as a receiving bottle. Compared with the round bottom flask, it can be placed directly...