HARDENING - 495 Annonces

Mardi 19 juillet 2022

Flange Slewing Bearing & Light Slewing Bearing Flange Slewing Bearing & Light Slewing Bearing, Compared with normal type slewing bearing, the slewing bearings with flange has less weight but the same flexible when rotate, so when the machines have space limit and weight limit...

Mardi 19 juillet 2022

In the process of swing bearing,slewing bearing use, it will endure 3 different direction force, including the axial force Fa, the radial force Fr and the overturning moment M. The combination of the three loads will change as a result of different working ways and different structural...

Jeudi 14 juillet 2022

The crane trolley wheels are important components used for the traveling of the bridge crane or gantry crane and the running of the trolley. The overhead crane wheel is made of ZG430-640 cast steel or the ZG-50SiMn low alley steel, hardening depth of the wheel tread part will not lower than 20mm...

Samedi 09 juillet 2022

3004 aluminium alloy is an alloy in the wrought aluminum-manganese family (3000 or 3xxx series). It is similar to the 3003 alloys, except for the addition of approximately 1% magnesium. Application of 3004 Aluminium Plate 3004 aluminum plate can be used for the processing and storage...

Samedi 02 juillet 2022

Quantité : 20MT

As a kind of mold steel used for plastic production, plastic mold steel is main material of plastic mold. The plastic mould steel has enhanced the development of industrial products to be advanced, diversified, individualized, and high value-added. All countries in the world count...

Samedi 02 juillet 2022

BOYA fine blanking production division, the products are good stability and reliability, high degree of automation, high production efficiency, simple operation and ergonomic. For localization of high-end intelligent fine blanking equipment, raise the capacity of fine blanking production...

Jeudi 30 juin 2022

Prix : 100USD

OVERVIEW OF COLD ROLLED STEEL COIL Cold rolled carbon steel coil is a type of steel that has been passed through a rolling mill below its recrystallization temperature from 400℃ to 700℃. Recrystallization of steel is a microstructural phenomenon that is achieved by heating on the...

Mercredi 29 juin 2022

Prix : 1-10usd

Metal Bellow seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. This seal type incorporates metal bellows as a spring-loading mechanism to maintain face contact when the seal is not pressurized and eliminates...

Vendredi 24 juin 2022

Quantité : 30pcs

Instruction for Use The disposable hemorrhoids stapler is a set of instruments that place a double staggered, circular row of titanium staples. Immediately after the formation of staples, the circular knife blade resects the excess of compressed mucosa or musculomucosa. The disposable...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Industrial mould is not a mold technology process, but a type of mold that is distinguished from the purpose of use. Generally speaking, products produced with industrial moulds are used for processing or business operations, such as industrial instruments, valves, fittings, , tools, etc...

Mardi 14 juin 2022

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Mardi 14 juin 2022

Quantité : 300 - Prix : 9000--20000(subject

FUWA Inboard Drum Series Axle is one of the most conventional American style design which is commonly used worldwide. Overview Overview of FUWA inboard drum trailer axle Integrated one-piece design axle beam with special heat treatment made by low carbon alloy steel 20Mn2. Spider...

Vendredi 27 mai 2022

Quantité : 1-200 Ton

We offer different kinds of pin type and medium voltage insulators for distribution system. Contact us get more details about pin type and medium voltage insulator, such as TDS, Application Method, OEM etc. We can supply different type of pin type insulator and medium voltage insulator...

Jeudi 26 mai 2022

Due to the less mismatched lattice and stable chemical and physical properties, sapphire(Al2O3) wafer is the popular substrates for III-V nitrides, superconductor and magnetic epi-film. They are widely used in GaN and thin-film epitaxial growth, silicon on sapphire, LED market and...

Mercredi 18 mai 2022

Quantité : 15000 piec - Prix : $5-100

It' s extracted from the linseed by SFE-CO2 Extraction. Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil bulk is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid, which has a unique response...

Mercredi 18 mai 2022

To realize the better performance of SWS-25A, JKZ has designed a fully digital control induction heating generator at the frequency range of 15~30KHz. It is designed with a maximum single machine power of 250KW and can be integrated with a state monitoring system. After a long time...

Mercredi 18 mai 2022

SWP series are JKZ's newly designed and manufactured induction heating power supplies. The MT version of SWP series equipment uses IGBT as the core component, and its frequency range is from 15KHZ to 30KHz. The maximum single machine power of this ultra high frequency induction heating...

Mercredi 18 mai 2022

SWP series are JKZ's newly designed and manufactured induction heating power supplies. The HT version of SWP series equipment uses IGBT as the core component. The equipment frequency covers the range of 30~60KHz. The maximum single machine power up to 500KW. The latest full digital...

Mercredi 18 mai 2022

The frequency range of the MFS-500A 500KW IGBT type medium frequency generator is from 1KHZ to 10KHZ. Designed based on customers' actual billets size dimensions, MFS-500A adopts the standard voltage 3 phase 380V/50HZ; whereas, the equipment can also be customized according to customers'...

Mercredi 18 mai 2022

RFL-A10000D High powered fiber delivered direct diode laser mainly used in hardening and cladding. In hardening applications lasers are excellent heat source for hardening of metal parts for preventing surface wear while preserving the metallurgical properties of the base material...

Mardi 10 mai 2022

The allowable range of geometric shape deviation of stainless steel angle bar is also stipulated in the standard, which generally includes items such as curvature, edge width, edge thickness, top angle, theoretical weight, etc., and stipulates that stainless steel angle steel must...

Jeudi 28 avril 2022

Prix : 100USD

There are steel equivalents of different materials in the market, including s136 steel equivalent,2738 steel equivalent and 2311 steel equivalent. As modified 2311 plastic mould steel, through special composition design and heat treatment process after forging, HS 2311 achieves the...

Mercredi 20 avril 2022

Quantité : 1000000 - Prix : $0.2-0.9

As an acrylic custom keychain factories and personalized keychains manufacturer, we offer a wide variety of colors, shapes and styles. Consult with our team of creative designers to bring your logo or design into life. Features of Customized Acrylic Keychain These acrylic key chains...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Jeudi 07 avril 2022

Ningbo Maolin Plastic Technology Co., Ltd was found in 2003 at Ningbo City, Zhejiang Province. As one of acrylic manufacturers in china, we have gained plenty of production experiences in acrylic/plexiglass products, like various kinds of shapes for holders and displays, office supplyments...

Vendredi 25 mars 2022

Quantité : 500kg

we are one of silicone coating suppliers of affordable range of Anti-Blasting & Anti-Spatter Coatings world-over. Our range comprising of Anti-Blasting (FB-PRTV), Weld Spatter Resistant Coating (FB-PRTV) etc. is reckoned for its peerless anti explosion splash effect, necessary...

Mercredi 16 mars 2022

Good thickening and thixotropy. Good anti-sagging properties and excellent stability in epoxy resin. Excellent reinforcing properties in silicone rubber especially at high filler loading levels and no crepe hardening on aging. Well suited for transparent systems. High water resistance...

Mercredi 16 mars 2022

Prix : 100USD

Press forging is the general name of forging and stamping. It is a forming process to obtain the required shape and size of the workpiece by using the hammer, anvil block, punch of the forging machine, or by applying pressure on the blank through the die to produce plastic deformation...

Mardi 15 mars 2022

Quantité : 10w - Prix : 1~100usd

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray gun foam needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...

Jeudi 10 mars 2022

Prix : 1000-6000USD

Engine Bottom Shell Partial Aluminum Mold Casting of Engine Bottom Shell As one of the professional aluminum stamping companies, we guarantee aluminum stamping press are of high quality with outstanding terminal stamping service Advantages of Aluminum Stamping to Engine Bottom Shell...