ALUMINA - 422 Annonces

Jeudi 16 mai 2024

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.65mm Conducting layer: Cu Thickness of metal layer: 300um Surface preparation: OSP Metal single-sided / double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1.high precision...

Jeudi 16 mai 2024

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.65mm Conducting layer: Cu Thickness of metal layer: 300um Surface preparation: OSP Metal single-sided / double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1.high precision...

Jeudi 16 mai 2024

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.5mm Conducting layer: Cu Thickness of metal layer: 35mm/35mm Surface preparation: heavy silver Metal single-sided /double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1...

Jeudi 16 mai 2024

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.5mm Conducting layer: Cu Thickness of metal layer: 35mm/35mm Surface preparation: heavy silver Metal single-sided /double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1...

Jeudi 16 mai 2024

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.5mm Conducting layer: Cu Thickness of metal layer: 35mm/35mm Surface preparation: heavy silver Metal single-sided /double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1...

Jeudi 16 mai 2024

Quantité : 200set/mon - Prix : 1000 USD/set

Les vannes d'angle à fond de cuve pneumatique FREE-VALVE sont conçues pour évacuer facilement et rapidement le matériau ou les échantillons du fond du réacteur, du drain ou du récipient d'alimentation. La vanne peut être soudée ou installée sur le vase par le bas du Vanne, les vannes...

Jeudi 16 mai 2024

Quantité : Any quanti - Prix : $0.01-150

I am David Lee, working in the export department of Sinoma Advanced Nitride Ceramics Co., Ltd., a China based enterprise engaged in research and production of advanced ceramic products over 40 years, I find your information from your website, and find that you are using ceramic balls...

Jeudi 16 mai 2024

Quantité : 30000Ton - Prix : USD560/Ton

Localisation : No.518 Fengcheng Road,Jincheng City,Shanxi Province, 048000 Jincheng, Personne à contacter : Snow Feng, 8613834323500

Jeudi 16 mai 2024

I am David Lee, working in the export department of Sinoma Advanced Nitride Ceramics Co., Ltd., a China based enterprise engaged in research and production of advanced ceramic products over 40 years, I find your information from your website, and find that you are using ceramic balls...

Samedi 11 mai 2024

Quantité : 150 pcs/mo - Prix : 900 USD/pcs

Vanne d'angle de fond de réservoir de fonctionnement manuel Fonctionnement manuel de la soupape FREE Les soupapes d'angle du fond de cuve sont conçues pour décharger rapidement et facilement le matériel ou les échantillons du fond du réacteur, du drain ou du récipient d'alimentation...

Vendredi 10 mai 2024

Faible Fluage Brique Contenu De Haute Teneur En Alumine Les caractéristiques: 1. Le contenue de Al2O3 est ≥50%. 2. La haute pouvoir réfractarité sous charge, elle est supérieure à briques réfractaires comme la fo rte teneur en Al2O3, cependant, elle est plus faible que la brique...

Mercredi 08 mai 2024

Quantité : 150 pcs/mo - Prix : 900USD/pcs

Valve de boue de type Y La soupape à boue type Y de FREE-VALVE est idéale pour de nombreuses applications car les soupapes sont conçues pour être utilisées sur des matériaux abrasifs. La vanne à boues de type Y est divisée en deux parties, l'une à gauche et l'autre à droite. Le boulon...

Mardi 07 mai 2024

KEYING Miniature Unmounted flap wheel sander home depot are characterized by high elasticity, high performance, and strong grinding force. The Standard Unmounted Flap Wheel can meet the needs of most customers, mainly used in mechanical processing, hardware, casting, auto parts, aviation...

Dimanche 05 mai 2024

Quantité : 1000 - Prix : 1 000,00 €

Abrasion Resistant Bends, Abrasion Resistant elbows The Manufacturing Process of Wear Resistant Ceramic Lined Steel Pipe and Elbows: SHS-ceramic steel pipe and elbow create a new generation of abrasion and corrosion resistant engineering pipeline which are produced in a way of...

Samedi 04 mai 2024

alumina ceramic beads for PWHT is made by special way,the density is higher,made by special material of 95% alumina,in this way,the heat treatment is better. Precise Mold control so that the tolerance is strict Technical data Density 3.65-3.7g/cm3 Alumina content 95% Hardness(Mohs)...

Mardi 30 avril 2024

The life of hot shrinkage mould is closely related to the extruded material and extrusion ratio, and the life of the die and mandrel is greatly shortened when processing metal materials with large deformation tension or high extrusion ratio. The lubrication conditions and cooling...

Vendredi 19 avril 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

The wafer dicing blade without hub is a kind of ultra-thin and precision diamond dicing blades with excellent cutting ability, good rigidity, and high efficiency. It fits to be used for dicing and slitting of many materials, such as semiconductors, electronic components, ceramics, etc...

Mardi 16 avril 2024

Platinum Catalyst BTL Platinum catalyst is a chemical used for the production of many organic compounds, such as polymers, pharmaceuticals, and polyolefins. It is one of the most popular catalysts used in the chemical industry due to its superior selectivity and activity. The BTL...

Samedi 13 avril 2024

The strainer is built in long steel pipe. We can weld steel pipe to the strainer or assemble KC nipple to the strainer. The application of the tin can strainer 1. Chemical products 2. Foodstuffs and spices (milk powder, coffee, tea, rice, grains) 3. Stones and powders (minerals, diamond sizing...)

Vendredi 12 avril 2024

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements, available...

Vendredi 12 avril 2024

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Jeudi 11 avril 2024

Pink Fused Alumina is a specialized and unique type of fused alumina with a distinctive pink color. It offers exceptional toughness, high purity, and excellent thermal stability. This material finds its primary application in high-end grinding and polishing processes, delivering superior...

Jeudi 11 avril 2024

High temperature calcined brown fused alumina is formed by high temperature and medium temperature calcined abrasives in the production process of raw brown fused alumina, and then annealed. Description of High Temperature Treated BFA Bulk Density of Brown Fused Alumina Grit Bulk...

Jeudi 11 avril 2024

What Is Fused Alumina.Monocrystalline fused alumina is a range of abrasive materials and blasting media widely used in various industries. The product line includes brown fused alumina, white fused alumina, zirconia fused alumina, pink fused alumina, and black fused alumina. These...

Jeudi 11 avril 2024

Brown fused alumina is made of high-quality bauxite, anthracite, and iron filings. It is cooled and smelted at a high temperature by more than 2000 degrees in an electric arc. It is crushed and shaped by a jaw crusher and a ball mill. Description of Brown Fused Alumina for Refractory...

Lundi 08 avril 2024

According to the characteristics of copper material and high requirements of the 3C fabricate, Kona nano alumina water-based copper cmp slurry provides a good surface finish with no compromise on the polishing rate. Polishing Slurry for 3C Copper Accessories 1 Copper is a soft metal...

Lundi 08 avril 2024

Copper is a good conductor. Resin substrates, metal substrates and ceramic substrates all need to be coated with copper to be used in electrical appliances. Ceramic substrate itself has good high temperature and corrosion resistance characteristics, after copper covered will be...

Lundi 08 avril 2024

Kona series Sapphire Polishing Slurry developed for kinds of Sapphire products, such as sapphire lens and sapphire substrate. Our Colloidal silica provide a good surface finish with no compromise with polish rate, and alumina slurry especially suitable for C-plane sapphire with a...

Lundi 08 avril 2024

Kona Metal Mirror Finish Polishing Slurry is an advanced blend of abrasive particles and high-grade chemicals that are specifically designed to achieve an incredibly smooth and shiny surface finish on metal workpiece. Our metal polishing slurry including stainless steel polishing slurry...

Lundi 08 avril 2024

We are one of the glass polishing powder manufacturers in China. Our goal is to provide our customers with high quality glass polishing powder to meet the needs of factory user . Kona glass polishing powder factory chooses quality abrasive to produce water-based polishing slurry,...

Lundi 08 avril 2024

There are a variety of different applications for alumina powders according to different morphology and purity. Our alumina polishing powder, choose linear and flake aluminum oxide powder which is suitable for use as abrasive, stable performance, strong grinding force, long slurry life...

Jeudi 04 avril 2024

SINOFLOC red mud setting flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better separation performance and reducing suspended solids significantly. SINOFLOC products could improve the liquor filtration operations and...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The high temperature alumina cement obtained...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks like...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulfo-aluminate cement, also named rapid setting cement, high strength cement, fast hardening cement...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks like...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Mardi 12 mars 2024

Prix : USD1500 to USD3000

activated adsorbent is a material that has the ability to attract and hold molecules, ions, or particles on its surface. It is commonly used in a variety of applications, such as water purification, air filtration, and industrial waste treatment. calcium chloride adsorbent are available...

Jeudi 22 février 2024

Zirconia fused alumina is made of alumina and zirconia as raw materials and is smelted at a high temperature above 2200 ℃ in an electric arc furnace. Fused zirconia alumina is a kind of fused alumina containing 10% to 40% of zirconium dioxide (ZrO2). What is zirconia alumina abrasive...

Jeudi 22 février 2024

White fused alumina powder is made of industrial alumina powder, which is smelted in an arc at a high temperature of over 2000 degrees and then cooled. It is suitable for the manufacture of ceramics, resin-bonded abrasive tools, grinding, polishing, sandblasting, precision casting etc...

Jeudi 22 février 2024

china tabular alumina powder for sale is a pure sintered α-alumina material. It is also known as white sintered alumina. Normally, the wholesale tabular alumina will be fully densified by rapid sintering at temperatures exceeding 1900°C without the use of sintering aids. Wholesale...

Mercredi 21 février 2024

Fujistar ceramic abrasive containing selected materials has a better service life and grinding efficiency than traditional sandpaper, excellent dust removal and fast cutting performance, achieving higher production efficiency and fast break cycle time. Ceramic alumina sandpaper is...

Mardi 06 février 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mardi 06 février 2024

Our single cartridge type seal is manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability. Cartridge Mechanical Seal Types Cartridge type mechanical seal is assembled by the rotary ring, stationary ring, spring, secondary seal( o rings...)

Jeudi 18 janvier 2024

Prix : 1-10usd

Fine powdered alumina polishing powder made into slurry used in the chemical mechanical polishing (CMP) process with a fast removal rate and controlled surface finish. The micron grade aluminum oxide powder has good dispersion, high cutting force, and can be used as water-based suspension...

Jeudi 18 janvier 2024

Prix : 1-10usd

Nano alumina powder polishing provides quality polished surfaces with a high removal rate, can be used for the final polishing of a lot kinds of materials. Nano-alumina powder has good chemical stability and adsorption ability, and can be good suspended in aqueous solution to prepare...

Jeudi 18 janvier 2024

Prix : 1-10usd

Our alumina polishing slurry and colloidal silica used for aluminum alloy lapping and polishing, provide a fast removal rate and good flatness and finish. Final polishing slurry provides a mirror-like finish. Colloidal silica used for aluminum alloy polishing, helps workpiece to achieve...

Jeudi 18 janvier 2024

Prix : 1-10usd

Aluminum nitride has high hardness, high thermal conductivity, good heat resistance, strong corrosion resistance and good mechanical properties. It can not only make various structural ceramics sintering additives or reinforcing agents, but also make aluminum nitride ceramic substrate...

Jeudi 11 janvier 2024

Prix : 1-10usd

Fie oumina polsing powder delivers a goodpolishedsufoce with fot enovdlrote. Aumina Polising Powder 1nicon con be usedfor rough and frd poisting f a lot knds of mateiols. a-ounina powcer hos stong chenica stobilt and high Mots ordhes Thepoising sury nodeof tis partile sre ctmino...

Jeudi 11 janvier 2024

Prix : 1-10usd

Micro alumina polish powders provide superior quality polished surfaces with a high removal rate and long slurry life. Nano alumina powder not only has the characteristics of stable wear resistance of α-alumina powder, but also has nano effect. The surface tension of abrasive powder is large...

Jeudi 11 janvier 2024

Prix : 1-10usd

Alumina ceramics have high Mohs hardness, strong compressive capacity, high resistivity and good insulation, which are widely used in the manufacture of various precision tools, and also made into alumina ceramic substrates, which are widely used in the field of electronic consumption...

Jeudi 30 novembre 2023

Diamond cup brush is a very special type of cup brush. It's suitable for relatively fine grinding. With a soft cutting ability, a diamond wire cup brush can deal with small burrs on the surface of the workpiece, as well as clean the rusts without damaging the workpiece itself. At the same time...

Vendredi 10 novembre 2023

Perforated Sheet Metal Panels Cutting seam : the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface : the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation : laser processing laser slits are fine, fast...

Mercredi 08 novembre 2023

Description of Calcium Aluminate Cement Calcium high temperature alumina cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained...

Mercredi 08 novembre 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Mercredi 08 novembre 2023

CSA (Calcium Aluminate MSDS Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Mercredi 08 novembre 2023

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Mercredi 08 novembre 2023

What is CSA Cement? CSA (Calcium Sulphoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. Cement CSA is short for calcium sulfoaluminate cement, also named rapid setting cement, high strength cement...

Jeudi 26 octobre 2023

The surface texture treatment requirements of special industries are extremely stringent, such as parts and products in extreme climatic environment having a level of product surface cleanliness, types of primers, topcoats, and protective coatings. Richconn, as a professional surface...

Mardi 24 octobre 2023

zirconia abrasive 40 is made of high-purity alumina and fused zirconia as raw materials. It is smelted at a high temperature of 2250 ° C and formed by special processing technology and Barmac ball milling. It is of high quality, extremely hard, compact in structure and special crystal...

Mardi 24 octobre 2023

Zirconia alumina abrasive 25 is made of high-purity alumina and fused zirconia as raw materials. It is smelted at a high temperature of 2250 ° C and formed by special processing technology and Barmac ball milling. It is of high quality, extremely hard, compact in structure and special crystal...

Mardi 24 octobre 2023

Special treated white fused aluminium oxide is made of high-quality fused alumina as the raw material. After high temperature and high heating, a layer of metal iridium composite material is plated on the surface of the material, and the special treated abrasive is made after calcination...

Vendredi 13 octobre 2023

Quantité : 200 tons - Prix : 25usd-100usd

As one of the most professional tungsten wire suppliers and tungsten wire manufacturers in China, HSG provides pure tungsten wire wholesale. Tungsten wire, a thin wire made by forging and drawing tungsten strips. Our tungsten wire is crafted from high-quality materials and meticulously...

Mardi 12 septembre 2023

Cooled and smelted under an electric arc at a high temperature above 2000 degrees, brown fused alumina for abrasive is composed of quality bauxite, anthracite and iron filings. Normally, the brown fused alumina for abrasive will be crushed into shape by jaw crusher and ball mill....

Mardi 12 septembre 2023

What Is Brown Fused Alumina? Brown fused alumina chemical composition is a versatile product available in various forms. It includes brown fused alumina for abrasive, brown fused alumina for refractory, and high temperature treated BFA. Known for its high hardness and toughness,...

Mardi 12 septembre 2023

Black Silicon Carbide Black silicon carbide 220 is made of quartz sand and petroleum coke as the main raw materials, and is smelted at high temperature in a resistance furnace. It is black crystal, brittle and sharp, and has certain thermal and electrical conductivity. Black Silicon...

Mardi 12 septembre 2023

Black Fused Alumina is a specialized type of fused alumina with a distinct black color. It is made by high-temperature smelting of selected bauxite ores and coal as reducing agents. This material exhibits high hardness, excellent thermal stability, and good electrical conductivity...

Mardi 12 septembre 2023

What Is an Abrasive Material? Being one of the largest abrasive material suppliers, we focus on the quality size distributions for different applications. Brown Fused Alumina: Two production lines of one Barmac crusher and one roller crusher can guarantee a stable supply for our customers...

Jeudi 07 septembre 2023

Quantité : 20GP

Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after...

Jeudi 07 septembre 2023

Quantité : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jeudi 07 septembre 2023

Quantité : 20GP

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite....

Jeudi 07 septembre 2023

Quantité : 20GP

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Jeudi 07 septembre 2023

Quantité : 20GP

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Jeudi 07 septembre 2023

Quantité : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jeudi 07 septembre 2023

Quantité : 20GP

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Mardi 05 septembre 2023

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Mardi 05 septembre 2023

Aluminum Ingot Uses Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous metal whose output...

Vendredi 04 août 2023

Fujistar waterproof aluminum oxide wet dry sandpaper are designed for sanding and finishing all coats of all paints, plastics components, etc., without deep scratching. The resin bond results in good grain adhesion, and the flexible paper backing remains strong even when wet. Use...

Jeudi 27 juillet 2023

According to the characteristics of copper material and high requirements of the 3C fabricate, Kona nano alumina water-based polishing slurry provides a good surface finish with no compromise on the polishing rate. POLISHING SLURRY FOR 3C COPPER ACCESSORIES Polishing Slurry for 3C...

Jeudi 27 juillet 2023

Copper is a good conductor. Resin substrates, metal substrates and ceramic substrates all need to be coated with copper to be used in electrical appliances. Ceramic substrate itself has good high temperature and corrosion resistance characteristics, after copper covered will be widely...

Jeudi 27 juillet 2023

Kona series Sapphire Polishing Slurry developed for kinds of Sapphire products, such as sapphire lens and sapphire substrate. Our colloidal silica polishing provide a good surface finish with no compromise with polish rate, and alumina slurry especially suitable for C-plane sapphire...

Jeudi 27 juillet 2023

We are the premier glass polishing powder factory in the industry. Our goal is to provide our customers with the highest quality product available to ensure their glass polishing needs are met. We choose quality abrasive to produce water-based polishing slurry, ensuring it is non-toxic...

Jeudi 27 juillet 2023

There are a variety of different applications for alpha alumina powders according to different morphology and purity. Our alumina polishing powder, choose linear and flake aluminum oxide powder which is suitable for use as abrasive, stable performance, strong grinding force, long slurry life...

Vendredi 21 juillet 2023

Quantité : 10000pcs - Prix : ¥8--¥1000

The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors when...

Mercredi 05 juillet 2023

Zircona fused alumina is made of fused alumina zirconia as raw materials and is smelted at a high temperature above 2200 ℃ in an electric arc furnace. Fused zirconia alumina is a kind of fused alumina containing 10% to 40% of zirconium dioxide (ZrO2). Zirconia Fused Alumina Features...

Mercredi 05 juillet 2023

As a kind of refractory materials, white fused alumina grit is generally used for aggregate and fine powder, because it has the characteristics of high refractoriness, wear resistance, corrosion resistance, etc., and it also has the characteristics of high load temperature and high-temperature...

Mercredi 05 juillet 2023

White fused alumina powder for abrasive is suitable for surface beautification of various high-end products, crafts or hardware. After sandblasting, the surface is white without any impurities, eliminating the trouble of cleaning. White fused alumina fine powder can be used as the...

Mercredi 05 juillet 2023

Tabular alumina for sale is a pure sintered α-alumina material. It is also known as white sintered alumina. Normally, the wholesale tabular alumina will be fully densified by rapid sintering at temperatures exceeding 1900°C without the use of sintering aids. Wholesale Tabular Alumina...

Vendredi 30 juin 2023

Tinplate Tinplates are a light gauge, cold-reduced low-carbon steel sheet or strip, coated on both faces with commercially pure tin. Hot Dip Zn-AL-MG Alloy Coated Steel OVERVIEW OF ZAM ALLOY COATED STEELHot dip Zn-AL-MG alloy coated steel, also known as ZAM steel, is a new type of...

Samedi 03 juin 2023

Prix : USD 1-5

Tin Can Strainer The strainer is built in long steel pipe. We can weld steel pipe to the strainer or assemble KC nipple to the strainer. The application of the strainer 1. Chemical products 2. Foodstuffs and spices (milk powder, coffee, tea, rice, grains) 3. Stones and powders (minerals...)

Mardi 30 mai 2023

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Crimped wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements...

Mardi 30 mai 2023

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Samedi 06 mai 2023

Prix : $700-1100/MT

Being one of the largest abrasive material suppliers in China, we focus on the quality size distributions for different applications. Brown Fused Alumina: Two production lines of one Barmac crusher and one roller crusher can guarantee a stable supply for our customers. Ten melting...

Samedi 06 mai 2023

Prix : $700-1100/MT

How to Make Boron Carbide Boron carbide is a kind of black crystal with a metallic luster, also known as black diamond, which belongs to inorganic nonmetallic material. At present, everyone is familiar with boron carbide material may be because of the application of bullet-proof armor...

Samedi 06 mai 2023

Prix : $700-1100/MT

Whether in the past or in the future, we should know that abrasive materials play an important role in industrial development. The land and the ocean together constitute the space for human activities, and the ocean occupies most of the space. The development of the shipbuilding industry...

Mardi 11 avril 2023

Prix : 10-30USD

Silicon Carbide Disc Brush The silicon carbide brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mercredi 01 mars 2023

Quantité : 5000-10000 - Prix : $700-1100/MT

Tabular alumina for sale is a pure sintered α-alumina material. It is also known as white sintered alumina. Normally, the wholesale tabular alumina will be fully densified by rapid sintering at temperatures exceeding 1900°C without the use of sintering aids. Wholesale Tabular Alumina...

Mercredi 01 mars 2023

Quantité : 5000-10000 - Prix : $700-1100/MT

Brown Fused Alumina For Abrasive Cooled and smelted under an electric arc at a high temperature above 2000 degrees, brown fused alumina for abrasive is composed of quality bauxite, anthracite and iron filings. Normally, the brown fused alumina for abrasive will be crushed into shape...

Mercredi 01 mars 2023

Quantité : 5000-10000 - Prix : $700-1100/MT

Provide the ideal completely abrasives solution. As one of the pro abrasive material suppliers in China, HAOYUN provides high-performance Brown Fused Alumina, White Fused Alumina, Zirconia Fused Alumina, Pink Fused Alumina, Black Fused Alumina, Sili Hot-selling Abrasive Material List...

Vendredi 24 février 2023

Diamond Stainless Steel Wire Cup Brush Diamond wire cup brush is a very special type of cup brush, suitable for relatively fine grinding, with a soft cutting ability, can deal with small burrs on the surface of the workpiece, as well as cleaning rust without damaging the workpiece itself...

Jeudi 23 février 2023

Types, Uses and Properties of Abrasives There are many kinds of china abrasives, which are generally classified according to their hardness. The material of the highest hardness is diamond, including natural diamond pellets and synthetic diamond grits; the second material is carbides...

Mardi 21 février 2023

Quantité : 23000000 - Prix : 0.5-3RMB

What Are the Advantages of Waterproof Abrasive Paper? Water sandpaper, also known as waterproof abrasive paper, is named because it can be sanded in water when used. Let's share some of the advantages of waterproof sandpaper this time. Waterproof abrasive paper is a kind of coated abrasive tool...

Mercredi 08 février 2023

It is a derivative of white corundum. Its appearance is rosy, its hardness is similar to that of white corundum, its toughness is slightly higher than that of white corundum, and its strength is high, its grinding performance is good, and its grinding precision is high. The abrasive...

Lundi 30 janvier 2023

Cutting seam: the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface: the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation: laser processing laser slits are fine, fast, energy concentrated, so the heat...

Dimanche 29 janvier 2023

The 5052 aluminum coil is an Al-Mg alloy and also contains a small number of elements such as manganese, chromium, and zinc. With the exception of a small part of the manganese component in the alloy, most of the manganese will form MnAl6, which can improve the stress resistance and...

Jeudi 19 janvier 2023

Quantité : 1million t - Prix : USD400-USD2000

A color steel coil refers to a finished steel product such as sheet or strip which has been wound or coiled after rolling. Steel coils can be classified into hot and cold-rolled types, or stainless coil of steel, carbon coil, and galvanized steel in accordance with current products...

Mercredi 11 janvier 2023

Zirconia fused alumina 40 is made of high-purity alumina and fused zirconia as raw materials. It is smelted at a high temperature of 2250 ° C and formed by special processing technology and Barmac ball milling. It is of high quality, extremely hard, compact in structure and special crystal...

Mercredi 11 janvier 2023

Zirconia alumina abrasive 25 is made of high-purity alumina and fused zirconia as raw materials. It is smelted at a high temperature of 2250 ° C and formed by special processing technology and Barmac ball milling. It is of high quality, extremely hard, compact in structure and special crystal...

Samedi 17 décembre 2022

Quantité : 1000000pcs - Prix : 0.1USD-60USD

It is a derivative of brown corundum, and its appearance is black. It is characterized by low alumina content and a certain amount of iron oxide (about 10%), so it has low hardness but good toughness. It is mostly used for free grinding, such as grinding or rough grinding before electroplating...

Samedi 17 décembre 2022

Quantité : 1000000pcs - Prix : 0.1USD-60USD

KEYING Miniature Unmounted Flap Wheels are characterized by high elasticity, high performance, strong grinding force. This kind of Unmounted Flap Wheel is made of Aluminium Oxide. Numerous types of aluminum oxide are used as abrasives. These may be present in molten or sintered form...

Samedi 10 décembre 2022

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Crimped wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements...

Samedi 10 décembre 2022

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Vendredi 25 novembre 2022

Quantité : 120sets/ye - Prix : USD1000-500000

LPG Annealing Furnace Metal tech Oil Annealing furnace is one of the heat treatment equipment in the mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them...

Samedi 22 octobre 2022

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mercredi 12 octobre 2022

Quantité : 1000000pcs - Prix : 0.1USD-60USD

It is used for aggressive grinding on hard materials with poor thermal conductivity, and the removal rate is the highest. Due to the self-sharpening of ceramic oxide particles, the performance has been very high. Aluminium Oxide Ceramic Flap Wheel with Shank (CAO) Grit Size Table...

Mardi 11 octobre 2022

Prix : $700-1100/MT

Pink fused alumina is based on alumina powder as the main raw material, adding some quantity of chromium oxide, then melted at high temperature. It is pink in color, the hardness is similar to that of white fused alumina, and its toughness is higher than that of white fused alumina...

Mardi 11 octobre 2022

Prix : $700-1100/MT

High temperature calcined brown fused alumina is formed by high temperature and medium temperature calcined abrasives in the production process of raw brown fused alumina, and then annealed. Typical Physical Properties of High Temperature Treated BFA 01. Eliminate Abnormal Expansion...

Mardi 11 octobre 2022

Prix : $700-1100/MT

According to the different alumina content, our fused alumina can be divided into brown fused alumina, white fused alumina, pink fused alumina, black fused alumina, zirconia fused alumina etc. Different Types of Fused Alumina Brown Fused Alumina High bulk density, low iron, good crystallization...

Mardi 11 octobre 2022

Prix : $700-1100/MT

Brown Fused Alumina For Refractory is made of high-quality bauxite, anthracite, and iron filings. It is cooled and smelted at a high temperature by more than 2000 degrees in an electric arc. It is crushed and shaped by a jaw crusher and a ball mill. Applications of Brown Fused Alumina...

Mercredi 28 septembre 2022

Quantité : 100000TON - Prix : 2300USD/TON-3000USD/

The 5052 aluminum coil is an Al-Mg alloy and also contains a small number of elements such as manganese, chromium, and zinc. With the exception of a small part of the manganese component in the alloy, most of the manganese will form MnAl6, which can improve the stress resistance and...

Mercredi 10 août 2022

Diamond cup brush is a very special type of cup brush, suitable for relatively fine grinding, with a soft cutting ability, can deal with small burrs on the surface of the workpiece, as well as cleaning rust without damaging the workpiece itself. At the same time, compared with the...

Vendredi 15 juillet 2022

Aluminum Coil for Sale The 5052 aluminum coil is an Al-Mg alloy and also contains a small number of elements such as manganese, chromium, and zinc. With the exception of a small part of the manganese component in the alloy, most of the manganese will form MnAl6, which can improve...

Vendredi 15 juillet 2022

3105 aluminum sheet is a typical deep-drawing material with an Al content of up to 98%, good rust resistance, and good electrical conductivity up to 41%. Similarly, the 3105 aluminum alloy sheet is a non-heat-treated alloy, which is slightly stronger than the 1 series industrial pure aluminum...

Vendredi 01 juillet 2022

Quantité : 50000pcs+ - Prix : $0.2-3

CHRISTMAS LIPSTICK& LIP TINT GIFT SET The Advantage of Christmas Lipstick& Lip Tint Gift Set 【AMAZING COLORS】Color doesn't fade when you touch it with your hands, drink water or wear a face mask. Kiss-proof, non-sticky, different lip colors every day. Customize your lip makeup...

Jeudi 30 juin 2022

Prix : 100USD

Flat carbon steel is a type of steel that is fabricated by the roll or in sheets with a range of dimensions and thickness. Flat steel products consist of plates, sheets, coils, and strips and they can be further categorized into three groups based on their manufacturing process: hot-rolled steel...

Mercredi 15 juin 2022

The ceramic microfiltration membrane element ( MF membrane) is made from alumina and zirconia which is an asymmetric membrane structure with multi-channel tubular shape. The pore is on the channel. Driven by operation pressure, the liquid is running in the membrane. The part less...

Mercredi 15 juin 2022

The flat plate membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Compared with the organic film, ceramic flat sheet membrane has the advantages of good chemical stability...

Vendredi 03 juin 2022

Metal tech Oil Annealing furnace is one of the heat treatment equipment in the mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them at an appropriate speed...

Mercredi 27 avril 2022

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Crimped wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements...

Jeudi 21 avril 2022

Quantité : 1 million - Prix : USD400-USD2000

Powder coated carbon steel is a type of steel that was applied with an additional layer of organic or metallic materials on its surface to protect from rusting and reduce wear/tear. Usually, the coating layer is applied to flat steel when it is in a coil form. By coating the steel...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Aluminum Ingot Product Details and Application Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous...

Samedi 16 avril 2022

Metal tech electric annealing furnace is one of the heat treatment equipment in mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them at an appropriate speed...

Samedi 16 avril 2022

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Samedi 12 mars 2022

Quantité : 150000 - Prix : Between 0.2---0.8 US

Yansen Refillable Aluminum Bottle Yansen provides good-quality and modern style aluminum bottles. Although the aluminum bottle will also be corroded, alumina will adhere to the corrosion surface and form a protective film to prevent further corrosion. We have aluminum spray bottles...

Mardi 08 mars 2022

Prix : 10-30USD

Exfoliating Scrub Cleanser Exfoliating Scrub Cleanser Features This gentle face cleanser and exfoliator helps polish away dead skin cells for healthy, glowing-looking skin. Infused with purified water and vitamin E, its rich hydration leaves skin feeling smooth and looking more luminous...

Mercredi 23 février 2022

Prix : 10-30USD

Diamond cup brush is a very special type of cup brush, suitable for relatively fine grinding, with a soft cutting ability, can deal with small burrs on the surface of the workpiece, as well as cleaning rust without damaging the workpiece itself. At the same time, compared with the...

Mardi 14 décembre 2021

The name of a circuit control board is as below: Ceramic circuit board, alumina ceramic circuit board, aluminium nitride ceramic circuit board, circuit board, PCB, aluminium substrate, high-frequency board, thick copper board, impedance board, PCB, ultra-thin circuit board, ultra-thin...

Samedi 11 décembre 2021

Quantité : 20000 pcs/ - Prix : USD0.9-2.5

[Anti-Spy Privacy Protection] keeps your personal and sensitive information safe from strangers whether you hold your phone horizontally or vertically. The anti-glare screen for cell phones is much clearer than other privacy screen protectors. Don't worry your device's screen brightness...

Samedi 11 décembre 2021

Quantité : 20000 pcs/ - Prix : USD0.9-2.5

Keep your eyes healthy and not tired after staring at the screens for a long time. Perfect for a short-sighted person, baby mother, school student, office worker, social media addict, online gamer, fashion lover, etc. This is highly recommended for children who are most vulnerable...

Samedi 11 décembre 2021

Quantité : 20000 pcs/ - Prix : USD0.9-2.5

With 3D rounded edge, it prevents cracking and chipping. It covers the entire screen and provides the best protection. The precision cutting still allows you to put the case on. An added oleophobic coating repels oils, fingerprints and smudges. Highly responsive, sensitive with clarity...

Samedi 11 décembre 2021

Quantité : 20000 pcs/ - Prix : USD0.9-2.5

3D curved full glue tempered glass for Samsung note 10 plus screen guard. This note 10 plus tempered glass screen protector is made of tempered glass in 9H hardness, making it resistant to impact and scratches. Full Glue technology allows a perfect fit between the glass and screen...

Samedi 11 décembre 2021

Quantité : 20000 pcs/ - Prix : USD0.9-2.5

This 3D iPhone 11 pro max tempered glass screen protector is rigid but ultra-thin that makes you feel nothing on the iPhone screen, meanwhile, it is really anti-scratch, anti-oil, bubble-free, and anti-fingerprints, so bring you the most natural iPhone viewing and 3D sensitive touch...

Mardi 30 novembre 2021

The Disc Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors when we assemble these...

Jeudi 25 novembre 2021

Quantité : 8000 tons/ - Prix : USD1800/MT

As a professional titanium dioxide powder supplier, the company originated from a family business of tio2 titanium dioxide in the 1980s, has become the strategic partner and authorized agent of many well-known titanium dioxide manufacturers at home and abroad. Characteristics of Titanium...

Jeudi 25 novembre 2021

Quantité : 8000 tons/ - Prix : USD1800/MT

As a professional titanium dioxide powder supplier, the company originated from a family business of tio2 titanium dioxide in the 1980s, has become the strategic partner and authorized agent of many well-known titanium dioxide manufacturers at home and abroad. Characteristics of Titanium...

Mardi 23 novembre 2021

Quantité : 100000 - Prix : 800-1200$

Galvalume steel sheet is an important alloy material often used in daily life. Galvalume steel plate is composed of Al Zn alloy structure, which consists of 55% Al, 43% Zn, and 2% Si solidified at 600 ℃. The whole structure is composed of Al Fe Si Zn, forming a dense quaternary crystal...

Mardi 09 novembre 2021

Metal tech Hydraulic Cover Annealing furnace is one of the heat treatment equipment in mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them at an appropriate...