OVERMOLDING - 86 Annonces

Friday 31 May 2024

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Saturday 25 May 2024

Silicone Injection Molding Our silicone injection molding services offer durable, flexible, and heat-resistant products. Ideal for a variety of applications. YWX, the silicone injection molding manufacturers and silicone injection molding suppliers ensure high-quality results with every project...

Saturday 25 May 2024

Plastic Injection Molding YWX, the 2 shot injection molding companies specialize in Plastic Injection Molding, a cost-effective method for mass production of high-quality plastic parts. Our advanced technology ensures precision and consistency in every piece. Plastic Injection Molding...

Saturday 18 May 2024

Prix : 2.8-3.2USD

Plastic Injection Molding What is plastic small scale injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors...

Saturday 18 May 2024

Prix : 2.8-3.2USD

Insert Molding Service Insert molding is one category of custom injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below...

Saturday 18 May 2024

Prix : 2.8-3.2USD

Common Injection Molding Materials What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on...

Saturday 18 May 2024

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic injection molding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines dedicated to injection molding...

Tuesday 16 April 2024

Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable products to pass the flame retardant test requirements of VW-1 or IEC60332. Improve environmental resistance: According to the requirements...

Tuesday 12 March 2024

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Friday 01 March 2024

Prix : USD3000-200000

Plastic Household Mould The smart switches and smart sockets of the smart home systems have the same specifications as normal power switches and sockets. Therefore, there is unnecessary to damage the wall, rewire, or buy new electrical equipment. It can replace the original wall switches...

Friday 01 March 2024

Prix : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Friday 27 October 2023

Injection Molding Over 20 years in China prototype precision plastic injection mold design services covering wide range of plastic injection molding technology for electronic, cosmetic, food & medical, household and industrial products with engineering assistance and an intensive...

Thursday 26 October 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Drip Tip Mold 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect rate. As a mold manufacturer, we can offer sorts of overmolding...

Monday 09 October 2023

What Is the Difference between Insert Molding and Overmolding Plastic injection molding is one of the most widely used processes for manufacturing high-quality and extremely precise parts. The process is known for its multiple advantages. Consequently, a wide range of industries have...

Monday 09 October 2023

Two shot moulding, also calleddouble shot injection molding, double shot moulding , multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Monday 09 October 2023

Over molding of keyplast is a special plastic molding process. Overmolding custom injection molding is similar to the two-color molding or two-shot molding process. Over moulding can make the surface of the product full of softness and increase product functionality and added value...

Thursday 24 August 2023

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Insert molding service is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on. Feel free to check out the injection...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Saturday 29 July 2023

Overmolding mold is made of molding over molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can be used to...

Wednesday 26 July 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Wednesday 26 July 2023

For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection mold parts are designed to withstand high temperatures and chemical corrosion. In this way...

Tuesday 30 May 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner mould thermocouple has two types: standard type J and type K...

Tuesday 30 May 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Tuesday 30 May 2023

Quantité : carton/woo - Prix : USD3000-200000

2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect rate. As a reliable injection molding supplier, we can also offer kinds of overmolding...

Friday 19 May 2023

Over 20 years in China prototype precision plastic injection mold design services covering wide range of plastic injection molding technology for electronic, cosmetic, food & medical, household and industrial products with engineering assistance and an intensive list of secondary...

Tuesday 18 April 2023

One-stop Custom Molding Services For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources...

Thursday 13 April 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

This 16 cavity mold will use 4 pin-points hot nozzles for gating, and one nozzle will control 4 pieces of parts gating in order to achieve filling balance. Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: mold master Mold base...

Saturday 04 March 2023

Prix : 100USD

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Saturday 04 February 2023

Pipette Tip Mold USM as a medical plastic moulding supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical industry are...

Saturday 04 February 2023

Medical Moulded Products Different requirements will have different mold steel and products material, USM will choose the mold steel material according to the product requirements and function to achieve zero harm for users, that is the basic standard, including the anti-rust and...

Friday 16 December 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Water Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Friday 16 December 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Injection Moulding Automotive Parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Friday 16 December 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection molding（or 2k molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference...

Tuesday 13 December 2022

Assembly Parts Meaning 100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client...

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility...

Tuesday 08 November 2022

By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast. Technical Data of Injection Molding TPU Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 1182B-RSS-1531S...

Tuesday 08 November 2022

Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment TPE injection guidance 1. Previous drying of the product 2 hours at 80℃ 2...

Thursday 20 October 2022

Quantité : USD3000-20 - Prix : 30-40sets/per month

Most of the smart home appliance products are electrical products and need to be connected with strong and weak electricity, most of the inner and outer shells are made by PC+ABS, ABS, and PC materials in V0 class because fireproof materials are highly corrosive, and the mold steel...

Saturday 17 September 2022

Assembly Parts Definition 100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Tuesday 02 August 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Wednesday 22 June 2022

Prix : 5000USD-30000USD

Custom Mold & Design The overmolded parts is a process that can bond different materials by the injection moulding. Plastic injection overmolding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot...

Tuesday 21 June 2022

Electronic parts 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; - Good product consistency and low defect rate. If you need high quality plastic moulding services, please...

Tuesday 21 June 2022

16 Cavity Mold This mold will use 4 pin-points hot nozzles for gating, and one nozzle will control 4 pieces of parts gating in order to achieve filling balance. Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: mold master Mold base...

Tuesday 14 June 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Wednesday 11 May 2022

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Tuesday 19 April 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Pipette Tip Mold USM as a medical plastic injection moulding supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Insert Mold USM molds focus on structural insert molding service, gas-assisted water-assisted molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding processing...

Wednesday 09 March 2022

Prix : 100USD

Two shot molding, also called double shot moulding, dual shot injection molding，multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Wednesday 09 March 2022

Prix : 100USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can be from simple to complex...

Wednesday 09 March 2022

Prix : 100USD

Over molding is a special plastic molding process. Overmolding insert molding is similar to the two-color molding or two-shot molding process. Metal overmolding can make the surface of the product full of softness and increase product functionality and added value. With this technology...

Wednesday 09 March 2022

Prix : 100USD

Insert molding is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Wednesday 09 March 2022

Prix : 100USD

What material is used in injection moulding？Materials used in injection moulding generally include pla molding, nylon injection molding, polypropylene plastic injection molding, pp injection moulding, pvc injection molding, hdpe injection molding and so on. Injection moulding raw...

Sunday 20 February 2022

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Tuesday 30 November 2021

COSMOPlat is wholly owned by Haier Group which is a world-leading provider of solutions to better life. As the world's first and only IoT ecosystem brand, Haier COSMOPlat has been included on the list of BrandZ™ Top 100 Most Valuable Global Brands for two consecutive years. Haier...

Wednesday 18 August 2021

LC Rapid is an expert of best injection molding companies in advanced technology when it comes to plastic injection mold manufacturing. With advanced technology, high quality plastic material, good quality control process, decades of manufacturing experience and a team of experienced...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Tuesday 20 July 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Thursday 03 June 2021

As a reliable machined components manufacturers, Premium has more than 21 years' experience of precision machining service. We are good at providing customers with a cost-effective price, qualified precision machined parts, short lead time with better services. We've gained much more...

Saturday 09 January 2021

Quantité : 1set - Prix : 5000USD-30000USD

The plastic injection overmolding part is a process that can bond different materials by the injection molding. Over-molding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot. Knowledge of plastic...

Saturday 20 June 2020

Quantité : 100-1,000, - Prix : customized

We mainly make plastic molds of automotive,medical device,home appliances, cosmetics, electronics and mechinal such as the refregirator fruit dishes, air-conditioner shells, printers accessories, coffee pots, micro-waves, fans, cellphone shells, notebook shells, cosmetics packaging boxes...

Friday 16 December 2016

Quantité : 1 - Prix : USD0.1

Name: plastic injection overmold and overmolding. Material: the white part material is PA66 The blue part material is TPU(soft material) Lead time: overmould one month Mass production: 15days Color: white and blue. Any colors are available. Packing and delivery: pp bags and...

Sunday 19 April 2015

Quantité : 100 units - Prix : Negotiable

Hitop est un ISO 9001: 2000 certifié fabricant de moules, privée avec une usine ultra-of-the-art production en Chine. Hitop vous donne les avantages de la baisse des coûts couplés aux normes d'ingénierie et de production élevées attendues dans la européen et nord-américain. La...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Wednesday 15 April 2015

Quantité : 100 molds - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Tuesday 14 April 2015

Quantité : 100 units - Prix : negotiable

Hitop is an ISO 9001: 2000 certified, privately owned mold manufacturer with a state-of-the-art production plant in China. Hitop gives you the benefits of lower costs coupled with the high engineering and production standar ds expected in the European and North American. The ability...

Tuesday 14 April 2015

Quantité : 100 units - Prix : Negotiable

Hitop is an ISO 9001: 2000 certified, privately owned mold manufacturer with a state-of-the-art production plant in China. Hitop gives you the benefits of lower costs coupled with the high engineering and production standar ds expected in the European and North American. The ability...

Thursday 09 April 2015

Quantité : discussibl - Prix : discussible

http://www.mu-mould.com/ MUYOUNG MOULD INDUSTRY LIMITED is a professional plastic mold manufacturer ,specializing in manufacturing auto parts mold (for precise accessories,auto sealing system,auto cooling system and interior components.), two shot mold, home appliance mold, overmolding(...)

Sunday 07 August 2011

Wellhope have made many projects for the rubber industry, mainly for rubber injection mold, and rubber mold for overmolding with plastic mold, as well as multi-cav. Mold that part cannot release by plastic molding.Localisation : GongMing Town,Bao’an District, Shenzhen city, China...