HORIZONTAL - 3061 Annonces

Sunday 17 January 2010

Quantité : 1+

As a leading brand of packaging machinery supplier in Taiwan, Joiepack has more than 28 years in the packaging area. Our company is specialized in manufacturing and designing automatic "Horizontal Flow Wrappers" and "Wet Wipe/ Tissue processing & packaging machines". Please visit...

Friday 15 January 2010

Quantité : 5000

Model:SYC-IR625C; Key Features: Image Sensor:1/4 Sharp CCD; Horizontal Resolution: 420TVL; Signal System: PAL/NTSC; Min. Illumination: 0Lux/F1.2 (IR lens on); Back Light Compensation:Auto; White Balance: Auto; Lens: 3.6mm; IR Lens: 24 pcs; IR Distance: 30 meters. Two choices of camera style...

Saturday 02 January 2010

The rock drill is a kind of light rock drill machinery. It can perform both dry and wet drilling under medium hard or hard rock(f=8-18).(the diameter of blast hole is 34mm-40mm, the depth of hole is 3m) This machine can drill downward with hand toward horizontal or acclive,when it...

Saturday 19 December 2009

Y26 type hand-hold rock drill is used at mines, Railway, irrigation and quarries to digging holes and for the second digging holes. Y26 type hand-hold rock drill can be used to digging dry or wet by horizontal holes, vertical holes or angling holes on medium-hard rock or hard rock...

Friday 04 December 2009

Powerful high-speed video protocol processor High-sensitivity CMOS sensors weather-proof structure for outdoor installation(P53 Level) Remote Pan/Tilt rotate(Horizontal:270°;Vertical:120°) Optimized H.264 video compression for low-bandwidth transmission Supporting up to 10 users online...

Thursday 19 November 2009

Quantité : 100 - Prix : 11 765,00 €

FM-12 Foamed Concrete Machine I. Working Process FM-12 mixes cement, fly ashes, and water in a ratio in the mixer into cement slurry, and then transport cement slurry to high pressure pipe through pump. After foaming agent dilutes by water, it will be mixed with compressed air in a certain ratio...

Wednesday 22 July 2009

Frequency Response -3dB 65 -18K -10dB 50-20K Impedance Biamp(LF/HF) 4Ω/4Ω Power Handling(RMS) Bi-amplifier Long-Term ELA (LF/HF) 600/250 watts Short-term peak (LF/HF) 2400/1000 watts Sensitivity 101dB/114dB X-Over: 2-way active Drivers: LF 2×12'' / 3'' coil ; HF 2×1.5''...

Wednesday 22 July 2009

Detailed Product Description Speaker Characteristics: Frequency Response -3dB 65-18K -10dB 50-20K Impedance Biamp(LF/HF) 4Ω/8Ω Power Handling(RMS) Bi-amplifier Long-Term ELA (LF/HF) 600/125 watts Short-term peak (LF/HF) 2400/500 watts Sensitivity 101dB/111dB X-Over: 2-way...

Friday 03 July 2009

Quantité : As Per Cli - Prix : As per Client Requir

Our Carbon Injector has been designed to sustain the specific flow-rates required by the different lancing methods in use. Carbon fines is filled from the top to the vessel with the help of a filling valve (Ball valve) and a small receiving-hopper with air-vibrator.The filling process...

Sunday 28 June 2009

Quantité : 1000

High quality and precision, cost effective shafts With advanced machines, such as cnc lathes, vertical and horizontal machining centers, millers, etc. Zenso could process a variety of shafts used on different machines according to buyer's requirement and drawings. For more detail...

Sunday 05 April 2009

Quantité : 1 CONTAINE

Je recherche parquet bambou vernis horizontal epaisseur 15mm largeur 96mm environ rainures languettes 4 cotes conditionne en carton charge en container de 20' sur palette FOB paiement par LCLocalisation : 20 ROUTE DE WOEL, 55210 ST MAURICE SOUS LES COTES, Personne à contacter : Thierry Fafet...

Friday 03 April 2009

Prix : 28000 EUR

NC horizontal boring machine 2N636GF1,1983,dia. 125mm.,table 1600x1800mm., weight of machine 34 ton..,price 28000 EURLocalisation : Elektrenu 10, 37176 Kaunas, Personne à contacter : Antanas Paskevicius, +37 0 37 35 03 31

Friday 03 April 2009

Prix : lowest price

Material: Polyester monofilament.Uses and Features:It is suitable for the dryness part of paper machine and printing and printing and dyeing machine,also for the fabrics of wash coal and horizontal delt.It is convenient,longvous,prone to be meded,and it is cheaper than mesh.This kind...

Thursday 26 February 2009

Brief Introduction This product adopts high frequency and high voltage technology and digital control technology. Its key components are imported from world known companies. This product has the advantages of small size, high integration, reliable performance, clear image, simple...

Thursday 12 February 2009

Quantité : 13 - Prix : 140 000,00 €

Nous cedons les 13 machines suivantes. 3 Tours numeriques OKUMA LC20 1 Centre usinage Horizontal paletisé Réalmeca 1 Centre vertical CNC systeme TIGER 4 1 Centre usinage Cincinati 4 Axes 1 Centre horizontal paletisé H400 Hitachi 2 Machines de rectification Plane 1 rectifieuse inter...

Monday 02 February 2009

Bevel Box Description: 1.whole metal shell or plasctic panel 2.with 3 button: ZERO,ON/OFF,ABS/ZERO 3.automatic shut off after 5 minutes 4.in horizontal measuring ,the accuracy is more higer with the highly accurate bubble. 5.with 3 disk magnet on the bottom,easy to attach to other tools...

Sunday 11 January 2009

• Pitch: 20mm • Display brightness: 5,000-8000 Nit • Color temperature: 6,500 deg. K • Drive mode: constant current driving/static latching • Pixel type and configuration: DIP 2,1,1 • Viewing angle: Horizontal (50% brightness): 110deg. • Viewing angle: Vertical (50% brightness): 50deg...

Sunday 30 November 2008

Quantité : 5 units

Hot Air Ovens,Water Bath,FURNACES,HOT PLATES,AUTOCLAVES,CENTRIFUGES,INCUBATORS ,DISTILLATION STILLS,HEATING MANTLES,SHAKING MACHINE,SEED GERMINATORS / ENVIRONMENTAL EQUIPMENTS Seed Germinators,Humidity Cabinet,Evironmental Chamber Humidity Cabinet,Plant Growth Chamber (small),Mortuery Chamber...

Sunday 12 October 2008

Certification(s): ISO9001, ISO14001, TUV, EEC Detailed Product Description Features: 1) With the application of high quality aluminum alloy and high transparent, super clear vials and aluminum spirit level features high sensitivity to the variation of measured surface position when...

Saturday 20 September 2008

Prix : 25000 EUR

Horizontal boring mill TOS W100, 1985.,1200x1200mm., dia. 100mm., Price 25 000 EURLocalisation : Elektrenu 10, 37176 Kaunas, Personne à contacter : Antanas Paskevicius, +37 0 37 35 03 31

Friday 29 August 2008

Quantité : 1 unit

SYNOPTOPHORE SPECIFICATIONS Movement of Optical Tubes a. HORIZONTAL : Adduction + 50 degree Adduction - 40 degree b. VERTICAL : Hyper 30 degree : Hypo 30 degree c. TORSIONAL : Incyclo 20 degree Excyclo 20 degree Slide Illumination : Rheostat controlled 12V Lamp for each slide. After...

Friday 22 August 2008

Prix : 12000 EUR

Longitudinal travel of boring spindle - 710 mm. Vertical traverse of headstock - 1000 mm. Cross traverse of built-in rotary table - 1000 mm. (no tailstock, no faceplate),price 12000 EUR Made by Ivanovo (Russia)1976; The machine-tool is in a good condition.Localisation : Elektrenu 10...

Friday 08 August 2008

Quantité : 1 - Prix : 75000 EUR

NC horizontal boring machine 2A637F2,1986, dia. 160mm.,table 1800x1800mm.,P-motor 22Kw,max. workpiece weight 12 ton.,weight of machine 35,5 ton..,price 75000 EURLocalisation : Elektrenu 10, 37176 Kaunas, Personne à contacter : Antanas Paskevicius, +37 0 37 35 03 31

Sunday 27 July 2008

Quantité : 10000pcs

1. 550TVL, 1/3“Hi-resolution color Sony CCD 2. 10~40mm Vari-focal auto iris lens 3. Separate glass: no IR diffusion and fog 4. Viewing angle: horizontal:33°~5° 5. Available IR distance: 5~30M 6. Designed for traffic surveillance 7. Clearly capture the number plate when car speed is...

Thursday 22 May 2008

Quantité : 200pcs

Name︰ 15/17/19/22 inch LCD monitor Model No.︰ NST1903Wide Brand Name︰ Chialstar Country of Origin︰ China Unit Price︰ USD $ 145 / pc Minimum Order︰ 200 pc contact us at info#chialstar.com or pattzia at gmail dot com Product Description LCD TFT 19" 16:10...

Monday 05 May 2008

Quantité : According - Prix : Discussion

Usage: Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for...

Monday 21 April 2008

Quantité : According - Prix : Discussion

Usage: Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for...

Monday 31 March 2008

Quantité : According - Prix : Discussion

Usage: Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for...

Friday 28 March 2008

Quantité : According - Prix : Discussion

Usage: Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for...

Wednesday 26 March 2008

Masonry horizontal joint reinforcement mesh include ladder-type and truss type. Ladder type reinforcements are designed to be embedded in the horizontal mortar joints of masonry walls. It consists of two parallel side rods with cross rods welded at 16” (400 mm) O. C., thus forming...