MOLDING - 3351 Annonces

Jeudi 27 juillet 2023

Musculpting uses non-invasive, highly focused electromagnetic wave technology, he can safely enter the muscle tissue up to 7CM deep under the skin, triggering its motor neurons, subsequently, stimulating the muscle to perform super-strong contraction, reaching high frequency extreme training...

Jeudi 27 juillet 2023

Combines Cryolipolysis, Cavitaiton and RF 3 technologies; with 5 treatment handles for total body treatment, fat reduction, body sculpting and face lifting. Triglycerides in human fat are transformed into solids at a low temperature of 5℃, and die after crystallization and aging,...

Mercredi 26 juillet 2023

Plastic Household Mould The smart switches and smart sockets of the smart home systems have the same specifications as normal power switches and sockets. Therefore, there is unnecessary to damage the wall, rewire, or buy new electrical equipment. It can replace the original wall switches...

Mercredi 26 juillet 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Mercredi 26 juillet 2023

The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Mercredi 26 juillet 2023

Medical pipette tip mold USM as a medical custom plastic injection molding supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in...

Mercredi 26 juillet 2023

For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection mold parts are designed to withstand high temperatures and chemical corrosion. In this way...

Mercredi 26 juillet 2023

Insert Moulding Products The combination of easy plasticity and elasticity of plastic and rigidity, strength and heat resistance of metal can be firmly made into a complex and exquisite metal-plastic integrated product, it can also reduce product size and weight; The combination of...

Mercredi 26 juillet 2023

Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product...

Mercredi 26 juillet 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Mercredi 26 juillet 2023

This shape of a mold is predetermined by a mould, a block that has been hollowed out. Aluminum, steel, alloys, and copper are the most common materials used to build it. It's made up of various other precision mold parts, too. Our mold spare parts include lifters and ejectors as well...

Mercredi 26 juillet 2023

When it comes to plastic injection mold parts, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Mercredi 26 juillet 2023

When designing plastic injection moulded parts to be used in conjunction with other parts, the assembly must be considered. There are several assembly techniques, mechanical fastening, press fit, hot staking, snap fit, welding, solvent bonding and adhesive bonding. We'll cover each...

Mercredi 26 juillet 2023

There are a wide variety of mechanical components. Our Fixture Parts are manufactured to precise specifications and include springs, bearings, actuators, clamps, snap rings, etc. Though most are very common, for most applications, Fixture Parts are designed to fit into their place...

Mercredi 26 juillet 2023

Base. Table. Column. Abrasive Wheel. Wheel Guard. Abrasive Wheel Head. Three Types of Traversing Wheels. Coolant Supply Nozzle. DETAILS OF GRINDING PARTS Advantages Of Grinding Parts Precision tolerances Accurate dimensions Smooth surface finish Best material Competitive...

Mercredi 26 juillet 2023

We supply AZ91D, AM60B magnesium alloy powder of various sizes. Magnesium alloy powder is suitable for the semi-solid machine (thixo) production and processing parts. AZ91D MAGNESIUM ALLOY POWDER AZ91D magnesium alloy powder is a type of powder made from the magnesium alloy AZ91D...

Mercredi 26 juillet 2023

We stock a line of plastic moulded products including well over 200 components for dialysis. We continue to innovate with new product designs and discoveries year after year. Contact Us to request access to our products catalog with pricing and a way to order. DETAIL OF FINAL PLASTIC...

Mercredi 26 juillet 2023

Choose Faster throughput, finer surface treatment, and lower cost cnc die making machine from Deed CNC. Faster speeds. Advanced completion for CNC machine for mold making Defect-free parts are essential in mold processing. Our die making CNC machines can provide excellent precision...

Samedi 22 juillet 2023

Quantité : 200 tons - Prix : 25usd-100usd

Pure tungsten bar is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties...

Samedi 22 juillet 2023

Prix : 1dollar-15dollar

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Samedi 22 juillet 2023

Quantité : 1-100000pc - Prix : 0.01-1000USD

Extruded Molding The products are processed by injection molding extruder, with a smooth surface and high dimensional accuracy. Products of different sizes, colors, and types can be customized according to customer requirements. As a professional injection and extrusion molding company...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

Electronics Product Mould Decades of accumulation of mould manufacturing technology have witnessed the popularity of electrical plastic molding products. The electronics custom plastic injection mold has been widely applied to various industries. As a result, electronics injection...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

CNC Components Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

2k Injection Molding Factory 2k injection moulding is a manufacturing process that refers to molding two materials or colors into one plastic part. This technology combines two materials or two colors into one ending plastic part by using a 2K automotive custom plastic injection...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

Electronics Product Part With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

Electronics Product Mould Decades of accumulation of mould manufacturing technology have witnessed the popularity of electrical plastic molding products. The electronics custom plastic injection mold has been widely applied to various industries. As a result, electronics injection...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

CNC Components Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for the...

Samedi 22 juillet 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

2k Injection Molding Factory 2k injection moulding is a manufacturing process that refers to molding two materials or colors into one plastic part. This technology combines two materials or two colors into one ending plastic part by using a 2K automotive custom plastic injection...

Samedi 22 juillet 2023

Tools, Locks, Small Appliances MIM China is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating...

Samedi 22 juillet 2023

Smart Key MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Samedi 22 juillet 2023

Small Hardware MIM stand for metal injection molding china, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press...

Samedi 22 juillet 2023

Slide Rail Linear guider can be divided into three types: roller linear guideway, cylindrical linear guideway and ball linear guideway, which are used to support and guide moving parts to do reciprocating linear motion in a given direction. According to the nature of friction, linear...

Samedi 22 juillet 2023

Rotating Cam MIM metal injection molding china shaft can reduce the volume of the finished product and the production cost of the rotating camera. Rotating Cam Specifictions Product key words: Rotating Cam,camshaft rotation, Materials: 4605,Fe8Ni Requirements: polishing, sand pulling...

Samedi 22 juillet 2023

RJ45 Cover RJ45 is a kind of information socket connector in wiring system. The connector is composed of plug (connector, crystal head) and socket (module). The plug has 8 grooves and 8 contacts. RJ is short for registered jack. JLY proviedes many types of RJ45 connector cover, for example...

Samedi 22 juillet 2023

Nanjing Dongkun Metal Co., Ltd. is a market-oriented and customer-oriented modern private enterprise. Founded in 2004, after more than 10 years of rapid development, it has become a group company integrating various casting and machining products and sales. Our company has a sales...

Samedi 22 juillet 2023

Nanjing Dongkun Metal Co., Ltd. is a market-oriented and customer-oriented modern private enterprise. Founded in 2004, after more than 10 years of rapid development, it has become a group company integrating various casting and machining products and sales. Our company has a sales...

Mardi 18 juillet 2023

Goodbiopak is dedicated to providing eco-friendly solutions for your beverage business with our range of eco friendly cold drink cups .The compostable cold drink cups is made through blow molding process, which can withstand heat up to 122°F. These recyclable cups for cold drinks...

Samedi 15 juillet 2023

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 14 juillet 2023

VERYGREEN can offer high-quality Clear PVC Elbows to meet your different needs. Clear PVC 90 degree elbow are widely used in PVC irrigation systems, usually at a 90-degree angle, which has the effect of changing the direction of the pipeline. Sometimes clear acrylic elbows can also...

Vendredi 14 juillet 2023

Methyl hydroxyl silicone oil is a chemical substance, commonly known as hydrogen silicone oil, its molecular formula is (CH3) 3si0 [(CH3) (H) Si0] NSI (CH3) 3. The biggest advantage of methyl hydrogen silicone oil is its good waterproof effect. Under the action of metal salt catalyst...

Vendredi 14 juillet 2023

The silicone encapsulation material is especially for the LED-Filament, covers high&low refractive index, and process material(anti-vulcanizing agent). These materials provide good optical, thermal, electrical, and mechanical protection to the LED components while allowing efficient...

Vendredi 14 juillet 2023

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA 6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Vendredi 14 juillet 2023

PA6 GF30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat...

Vendredi 14 juillet 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Vendredi 14 juillet 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Vendredi 14 juillet 2023

PA66GF50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66 GF50 (A2011J) PA 6.6 GF50 HB grade is applied...

Vendredi 14 juillet 2023

Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable products to pass the flame retardant test requirements of VW-1 or IEC60332. Improve environmental resistance: According to the requirements...

Vendredi 14 juillet 2023

TPEE Polymer (TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephthalate (PBT) hard segments and polyether soft segments. ATP Polymer is a leading manufacturer and supplier in the thermoplastic polyester elastomer market that offers all kinds of TPEE material...

Vendredi 14 juillet 2023

Quantité : 10000T/yea - Prix : US$0.1-US$1

Smartstore plastic storage container/baskets with handles, a professional plastic organizer in rectangular shape, it can be decorated by offset printing or IML, or just to be blank. Advantage of Transparent Plastic Storage Container In Rectangular Shape Rectangular plastic storage...

Vendredi 14 juillet 2023

Quantité : 10000T/yea - Prix : US$0.1-US$1

400 ml packaging produced by injection molding. It is one of the suitable solutions for ice cream packaging. Information of 400ml Round Ice Cream Container Item No.: HL01-002 Description: 400ml Round Ice Cream Container Brimful Volume: 490ml Material: Polypropylene (PP) Model Type...

Vendredi 14 juillet 2023

The nose bridge metal strip of the face mask plays a supporting role on the nose bridge and prevents dust from entering. The Overview of One Wire Nose Wire For the face of people, the single core nose wire plays a supporting role. It protects the cleanness of the air in the face mask...

Vendredi 14 juillet 2023

The nose strip of the face mask plays a supporting role on the nose bridge and prevents dust from entering. The Overview of Full Plastic Nose Wire The nose wire of the face mask plays a supporting role on the nose bridge and prevents dust from entering. It is often used in surgical...

Mercredi 12 juillet 2023

Combined Electronic Enclosures Types: The sheet metal pressing process can be roughly divided into two categories: separation process and forming process (also divided into bending, deep drawing, and forming). The separation process is to separate the stamping parts and the blanks...

Mercredi 12 juillet 2023

Aluminum & Anodizing Enclosures Material: Aluminum plate, sus , secc ,sgcc ,spcc etc. Thickness: 2.0mm or 1.2mm, 1.5mm, 1.8mm, 2.0mm etc. Process: Blanking - hydraulic molding - bending - riveting - powder spraying Customized Order of Aluminum & Anodizing Enclosures Produced...

Mercredi 12 juillet 2023

Prix : 2.4-2.9$/kg

Description Description of Toothpaste Grade CMC The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional...

Mercredi 12 juillet 2023

Pharmaceutical Packaging Manufacturing As a professional pharma packaging company, Gongdong in the research and exploration in the field of disposable medical consumables and drug packaging materials more than 30 years, on the basis of the digital factory, make full use of the Internet...

Mercredi 12 juillet 2023

Epidemic prevention products Manufacturing The coronavirus pandemic products provided used for infectious virus pretection, collection, storage and analysis during the process of Covid-19 screening test and PCR test. Different Types of Epodemic Prevention Products Virus Sampling Pipette...

Mercredi 12 juillet 2023

Disposable Lab Consumables Manufacturing Our disposable laboratory consumables are accept customization. We have a professional technical team to provide customers with comprehensive service. All of our laboratory consumables are made of high quality materials and could be useful...

Mercredi 12 juillet 2023

Specimen Collection Containers Manufacturing GongdongTM specimen Collection system, including varieties of containers, tubes and traps, is intended to be used in clinical lab according to the instructions provided for collection, preservation, transport and storage of dry or wet body...

Mercredi 12 juillet 2023

Goodbiopak is dedicated to providing eco-friendly solutions for your beverage business with our range of eco friendly cold drink cups.The compostable cold drink cups is made through blow molding process, which can withstand heat up to 122°F. These recyclable cups for cold drinks can...

Mercredi 12 juillet 2023

Quantité : 5000-10000 - Prix : 1000-5000,5000-10000

Modern cabinet design is popular in simple and stylish atmosphere. His success lies in the overall effect and detailed control. Hiding intelligence andmulti-function under its low-key appearance can surprise people inadvertently. He is neither heavy nor frivolous. He focuses on delicacy...

Mardi 11 juillet 2023

As one of the most professional plastic mould suppliers in China, Jeward Mould has rich experience in the design and manufacture of crate mould and pallet mould. We are good at plastic mould products with complex structure and large size, like beverage box, pallet and bin. Our mould...

Samedi 08 juillet 2023

Quantité : 600000 Uni - Prix : 50USD~280USD/piece

The touch screen of this series touch pad front door lock is designed with ultra-thin all-tempered glass, and the fingerprint reader is located on the front handle, which can be unlocked in one second by lightly pressing the handle. TYPES OF ELECTRONIC/DIGITAL TOUCHPAD DOOR LOCK E...

Vendredi 07 juillet 2023

product description Product neme Counter Speaker display stand Product description New acrylic counter display stands ,Simple modeling, brand exclusive color, customized display frame can make the product more appropriate and achieve the integrated molding effect. Model PE2016 Material...

Vendredi 07 juillet 2023

Quantité : 500tons - Prix : USD0.015-----USD100

Flexible rubber magnet belongs to ferrite magnetic material series,and known as ferrite rubber magnet. It is made of bonded ferrite magnetic powder and synthetic rubber by extrusion molding, extension molding and other processes. Flexible rubber ferrite magnet is a kind of permanent...

Jeudi 06 juillet 2023

Prix : USD0.1-15

If you're looking for an economical, efficient way to route a few cables in retrofitting, nail type cable clamp is the product you need. We carry a large range of sizes of cable nail clips, of different kinds. You will find cable clamp nails easy to install on the surface, such as wall...

Jeudi 06 juillet 2023

Prix : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Jeudi 06 juillet 2023

Low speed plastic granulator is especially suitable for crushing and reusing all kinds of hard plastics with better effect. The optimized design of the knife rest is divided into slice knife type, claw knife type and flat knife type. The claw-shaped knives can disperse the force,...

Jeudi 06 juillet 2023

Soxi's reaction molding technology encompasses foaming machines, foaming mold fixtures and lines for various applications, mixing heads, foaming molds, and many types of trimming equipment. We serve high-end automotive interior and exterior production processes and provide efficient...

Jeudi 06 juillet 2023

Soxi is one of the top plastic material dryer manufacturers , our plastic dryer machine will avoid the following questions. In the plastic machinery equipment, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage...

Jeudi 06 juillet 2023

INDUSRIAL CHILLER MACHINE BY SOXI Soxi is one of the top industrial chiller machine manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through...

Jeudi 06 juillet 2023

The cooling and heating integrated machines are equipped with cold water and hot water channels, which can adapt to the different high and low-temperature requirements of the front and rear molds. The plastic mold temperature controller low-temperature channel is 5~35℃, and the temperature...

Jeudi 06 juillet 2023

The hot air dryer for plastic can be directly installed on the injection molding machine. Hot air enters evenly from bottom to top to ensure a good drying effect. The middle part of the barrel is an openable structure for easy cleaning. The air volume can be adjusted according to...

Jeudi 06 juillet 2023

The main machine and the hopper adopt a separate design, which can be matched with more than 2 hoppers for one-to-many conveying, which improves the raw material conveying capacity, and the raw material conveying capacity reaches 700 kg per hour. The maximum lift is up to 10 meters...

Mercredi 05 juillet 2023

Quantité : 1000kg - Prix : 400-800

Compression Molding Peek PEEK has excellent corrosion resistance, radiation resistance, high-temperature resistance, low-temperature resistance, hydrolysis resistance and good electrical properties, can be used under high temperature, high pressure and high radiation and other harsh...

Mercredi 05 juillet 2023

Which Mold do you want to do? Plastic Injection/die casting or punch mold, etc. Which Mould Material do you want choice? 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61, etc. Which does the Product Material want? PP, PC, PS, PE, PU, PVC, ABS, PMMA, etc. How many Cavities? Single/Multiple...

Mercredi 05 juillet 2023

Prix : $0.16-$3

Ultra-thin walls to optimize thermal transfer resulting in increased reaction efficiencies. Available with Ultra-clear wells for easy visualization of small sample volumes. Available in white options which increase the intensity of fluorescence transmitted through the cap or sealing film...

Mercredi 05 juillet 2023

This is German model 12T, 14T, 16T, 18T type Good heat dissipation, The blade-like reinforcing rib structure design for the surface of brake drum ensures faster air flow when the vehicle axle rotates, enhances heat dissipation and prevents high-temperature bursting. For reliable supply...

Mercredi 05 juillet 2023

Ball Screw Nut Assembly The ball screw&nut assembly consists of a screw and a nut, each with matching helical grooves, and balls which roll between these grooves providing the only contact between the nut and the screw. As the screw or nut rotates, the balls are deflected by the...

Samedi 01 juillet 2023

Prix : 5000-50000USD

Plastic Recycling Granulator Machine With Water The plastic recycling granulator machine with water adopts a special screw design and different configurations, the equipment is composed of three screws, the first stage adopts electromagnetic heating to remove moisture content in the plastic...

Samedi 01 juillet 2023

Prix : 5000-50000USD

Plastic Pallet Welding Machine for Sale Hot plate pallet welding machine made by our plastic pallet welding machine manufacturer is a kind of machine widely used for welding various plastics.First, use an injection molding machine or a pressing machine to make two products of different...

Samedi 01 juillet 2023

Prix : 5000-50000USD

Plastic Film Crusher The plastic film crusher produced by our plastic film crusher factory is mainly used for the crushing of various film waste plastics, such as: domestic waste film, mulch film, greenhouse film, paper mill waste plastic film, composite packaging film, Tetra Pak, etc...

Samedi 01 juillet 2023

The electric type of vacuum suction device can be applied in feeding and blanking of the glass, sheet metal, marble, etc. material. The maximum weight capacity can be 2500KGS. We will ODM the most suitable sheet metal grip vacuum lifting equipment for you that ensure can use for...

Samedi 01 juillet 2023

Hot runner temperature controller systems plays a particularly important role in injection molding production. It can bring higher product quality, higher production efficiency and lower material loss. Tinko provides complete solution for hot runner controller systems. We offer hot...

Jeudi 29 juin 2023

Quantité : 1-1000PCS - Prix : 500-10000￥

With the adding number of vehicles on our roads, it has become more critical than ever to reduce weight to increase energy effectiveness and reduce CO2 emissions, a typical way in which manufacturers are achieving this aim is by using automotive parts die casting. Die casting in automobile...

Jeudi 29 juin 2023

Prix : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Jeudi 29 juin 2023

Prix : $850~$2000 / ton

Aluminum is a lightweight metal with silvery-white color. Because of its chemical features, aluminum never exists in the metallic form in nature. But aluminum compounds are abundant, and with the development of modern extraction technology, now aluminum becomes one of the most widely...

Mercredi 28 juin 2023

Quantité : 500000 Pie - Prix : $0.2 - $1500

The switching valve is a type of multiposition valve without a public port but with dispensing ports around, a sample loop is required for such kind of valve to create a metering specific volume of fluids for a lab test, the applications are very flexible as you can name any port...

Mercredi 28 juin 2023

Quantité : 500000 Pie - Prix : $0.2 - $1500

Stepper peristaltic pump motor is the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach a specific range of flow volumes with the help of a stepper motor and driver in the back of the pump head. We offer several models...

Mercredi 28 juin 2023

Mixing Modification of Elastomer——Blending Modification of SBS/SEBS Applications of Thermoplastic Elastomer: The English acronym of Thermoplastic Elastomer is TPE. In the Chinese market, TPE refers to SBS/SEBS blending modification materials. Because SBS/SEBS elastomer usually has...

Mercredi 28 juin 2023

Quantité : 500000 Pie - Prix : $0.2 - $1500

Selector valve is a type of multiport valve with public port and dispensing ports around, the public port is used to inlet liquid while dispensing ports are used to distribute liquid one after another as the control program told them to a position in a specific port, it is one of...

Mercredi 28 juin 2023

Quantité : 500000 Pie - Prix : $0.2 - $1500

Peristaltic Tubing is a kind of biocompatible flexible tube in transparent, yellow or black colors, peristaltic hoses have strict tolerance requirements on inner diameters to ensure high precision flowing volumes for peristaltic liquid pump systems, they are mostly used in industrial...

Mercredi 28 juin 2023

Quantité : 500000 Pie - Prix : $0.2 - $1500

Peristaltic Pump Head is the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach the specific range of flow volumes with the help of control units at the back such as motor and driver. As one of the professional peristaltic...

Mercredi 28 juin 2023

Prix : 100USD

SMC Automotive Molding, Car Mould Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption...

Mercredi 28 juin 2023

Prix : 100USD

Custom high Precision Compression/bulk molding compound manufacturing with fast lead time BMC/SMC Mould Manufacturer We mainly use bmc injection molding and pressure molding as the methods. When designing the flow channel and parting surface, we think that the cavity pressure should...

Mercredi 28 juin 2023

Prix : 100USD

BMC is the abbreviation of Bulk Molding Compounds. It is also cluster moulding plastics. What is a BMC mould? What are the features and applications? BMC molding is a kind of thermosetting plastic, which mixes various inert fillers, fiber reinforced materials, catalysts, stabilizers...

Mercredi 28 juin 2023

Prix : 100USD

SMC/BMC Household Goods Description Including: washbasin, laundry basin, trash can, platen, ceiling. SMC (sheet molding compound) materials are revolutionary materials in the health industry. It is waterproof and does not absorb moisture. It is ultra-light compared to traditional...

Mercredi 28 juin 2023

Prix : 100USD

Mold Insulation Board Description SMC and BMC molding materials deliver top performance for electric industry. Plastic molded electric products subject to electrical arcing or tracking, but SMC and BMC materials can stand long exposure to high temperature. SMC and BMC composite electric...

Mercredi 28 juin 2023

Prix : 100USD

At present, in the development process of BMC mold, the BMC composite material is thermosetting resin. In the process of mold heating and curing, because of the expansion performance of BMC material, the pressure in the mold cavity suddenly increases, which makes it difficult to demould...

Mardi 27 juin 2023

Quantité : 100000PCS - Prix : USD0.1~3.00

Luxury cosmetic packaging wholesale refers to packaging materials used to pack cosmetic contents. According to the material, skincare packaging can be divided into 5 categories: plastic, glass, metal, paper and wood products. The production process of plastic products includes injection molding...

Mardi 27 juin 2023

The china die cutting machine is all kinds of trademarks processed into the final product must be the machine. The steps of the die-cutting process are as follows: unwinding - die cutting - scraping - winding or crosscutting. Unwinding the gas up the shaft. Die cutting is the core...

Mardi 27 juin 2023

Quantité : 20MT

The HS PH13 hot work die steel is also a good material for many customers. As modified hot work die steel with high roughness and high isotropy, HS PH13 with its molding die design optimizes the alloy element ratio on the basis of traditional H13, reduces the content of harmful...

Mardi 27 juin 2023

Quantité : 20MT

As modified high-toughness, high-isotropy, high-quality hot work & plastic mold steel, the steel has good cold and hot fatigue resistance and corrosion resistance, good cold and hot workability, good hardenability, and high thermal strength and oxidation resistance performance...

Lundi 26 juin 2023

lastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, we have to choose proper plastic materials, such as food grade PP,PS,PE etc.,we always stand in the customer's perspective to design and...

Lundi 26 juin 2023

A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the...

Lundi 26 juin 2023

Provide complete solutions from product design/mold manufacturing/injection mass production. Provide professional medical consumables and medical device molding development and injection molding production services for companies engaged in biotechnology technology development and...

Lundi 26 juin 2023

Auto Rear View Mirror Housing Mold The car rearview mirror is an important part of car exterior parts, located on both sides of the car, is one of the most important exterior parts of the car. The rearview mirror of a car is a device used to allow the driver to observe the road conditions...

Lundi 26 juin 2023

PVC fitting mould is playing an important role in the pipeline systems, they are used for connection, control, direction change, diversion, sealing, support in the piping & plumping system installation. There are a variety of pvc moulded fittings that are of different connection functions...

Jeudi 22 juin 2023

As an enterprise specializing in plastic injection molding, our Plastic Auto Parts Injection Molding has obvious advantages. First of all, we use the most advanced injection molding technology and the highest quality raw materials to ensure the stability and reliability of product quality...

Mardi 20 juin 2023

Die sinking edm aluminum parts consist of an electrode and the workpiece is submerged in an insulating liquid. The electrode and the workpiece of EDM machine spare parts are connected to a power supply in which the electrode is made according to the required shape. The machine uses...

Mardi 20 juin 2023

Core and cavity are used in the injection molding process, where the concave part of the mold is the cavity and the convex part is the core. The core and cavity in injection molding are used in pairs, with the cavity also referred to as the female mold and the core as the male mold...

Mardi 20 juin 2023

Precision CNC milling parts Completed by CNC milling and forming grinding Accuracy of our custom cnc machining milling parts can be achieved within ±0.002mm. Main products: all kinds of precision parts, connectors, fixture, standard parts, mold design, development and manufacturing...

Mardi 20 juin 2023

Our CNC turning precision parts are mechanically manufactured and mostly rotationally symmetrical parts that are produced by turning as a manufacturing process. Similarly, we speak of welded parts in welding, laser parts in laser cutting or milled parts in milling. DESCRIPTION OF...

Mardi 20 juin 2023

PRECISION PLASTIC INJECTION MOLDING Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part...

Samedi 17 juin 2023

Prix : 1,00 €

- Basic Info. - Model NO. LPCE-2 After-sales Service Perfect Warranty 24months Trademark LISUN Origin China - Product Description - LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED's quality should...

Mardi 13 juin 2023

Our sleeve sealer machine adopts international advanced control components, which can be manually pushed or automatically fed according to the choice, film feeding, sealing, and cutting, and the continuous packaging action makes the efficiency very high. Having stable performance...

Samedi 10 juin 2023

360 degree surrounding toothbrush The 360° surrounding toothbrush is made of 100% premium silicone. No odor, non-toxic, Phthalates, Lead, PVC, Latex, Metal and Cadmium Free. Antibacterial materials are added to the silica gel bristles, so this toothbrush has antibacterial effect....

Jeudi 08 juin 2023

Quantité : 500tons - Prix : USD0.015-----USD100

The round magnets with a hole in the center are made of SrO or BaO and Fe2O3 by molding and sintering, they are looks like discs and known as ring-shaped permanent ferrite(ceramic) magnets. Ring shape ferrite (ceramic) magnets are axially magnetized, and with magnetic poles on flat surface...

Jeudi 08 juin 2023

Quantité : 500tons - Prix : USD0.015-----USD100

The flat circular hard magnets made out through molding and sintering with raw material of SrO or BaO and Fe2O3 called sintered ferrite (ceramic) disc magnet, its surface is in black color. The round shape is one of the most common shapes of ferrite magnets, which has a narrow range...

Jeudi 08 juin 2023

Quantité : 500tons - Prix : USD0.015-----USD100

Ferrite magnet blocks are rectangle (or square) permanent magnets made of basic raw material of SrO or BaO and Fe2O3 based by molding and sintering. Smaller ferrite block magnets can also be processed by cutting. The magnetic energy product of the rectangular ceramic block magnets is low...

Jeudi 08 juin 2023

Quantité : 500tons - Prix : USD0.015-----USD100

Ferrite arc magnet is a kind of functional electronic component, called motor magnet, which is mainly used in DC micro motor. The magnetic properties of ferrite motor magnets tile show that they have high permeability at high frequency. In addition to the magnetic properties, dimensional...

Jeudi 08 juin 2023

Prix : 50-90

This product is suitable for honda accord upper control arm, single sheet steel molding, symmetric rubber sleeve. Condition: New Country/Region of Manufacture: China Manufacturer Part Number: SF-HD-105 L; SF-HD-106 R Brand: OEM OE/OEM Part Number: 51520-TA0-A01, 51520-TA0-A02...

Jeudi 08 juin 2023

Prix : 50-90

This product (Honda accord control arm) is suitable for Honda Accord 1999-2003 Upper ARM, single sheet steel molding, symmetric rubber sleeve. Condition: New Country/Region of Manufacture: China Manufacturer Part Number: SF-HD-119 L; SF-HD-120 R Brand: OEM OE/OEM Part Number...

Mardi 06 juin 2023

The ultrasonic spray pyrolysis process can be simply described as a series of physicochemical processes, such as mixing each metal salt into a precursor solution according to the stoichiometric ratio required for the preparation of composite powder, atomizing it by the atomizer, and...

Vendredi 02 juin 2023

Prix : 0.1-6

Tactile Paving Material A tactile path is used by partially sighted people for navigational purpose. Surface mounted tactile paving is easy to install and is used for certain fixed occasions. Whatever the size and scale of your project, Xiongchang can provide high-quality types of...

Vendredi 02 juin 2023

Hot Sale sugarcane bagasse disposable square bowl from EASY GREEN, food Grade Biodegradable Disposable bagasse round bowls With Lid, disposable serving bowls for hot and cold food. Made from bowl bagasse, the raw material is sustainable.The size include 16oz, 24 oz, 32oz, 48oz. ...

Jeudi 01 juin 2023

Prix : $6.2/sqm~ $10.5/sqm

SPC Stair Nose Flooring End Cap Specification Product Name Flooring End Cap Specification 2400*35*8 mm Package Quantity 25 pcs/carton Installing Way glue/snap/staple Application corner edge, floor edge trim We can offer different stair nosing types for sale, and the...

Jeudi 01 juin 2023

Prix : $6.2/sqm~ $10.5/sqm

SPC flooring accessories include skirting, t-molding, reducer, end cap, quarter round, and stair nose. These years skirting and t-molding are most popular among customers. SPC T Moulding - moulding is used to create transitions between two floors of equal thickness. T molding is...

Jeudi 01 juin 2023

LSAW Pipe (Longitudinal Submerged Arc-Welding Pipe), DSAW pipe (Double Submerged Arc Welded Steel Pipe), Both of them are made of Steel raw materials by Arc Welding way which take the steel plate as raw material, mold it by the molding machine, then do double-sided submerged arc welding...

Mercredi 31 mai 2023

Quantité : 1000t/m

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF20 halogenated FR Typical Application of PA GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified grades...

Mercredi 31 mai 2023

Quantité : 1000t/m

PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high tensile...

Mercredi 31 mai 2023

NBR foam tape stands for nitrile-butadiene rubber foam tape, also called as PVC foam tape. Thermoplastic elastomer is also called artificial rubber or synthetic rubber. Its products not only have the high elasticity, aging resistance, oil resistance of traditional cross-linked vulcanized rubber...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

17 seats, equipped with a high-power electric drive system, the climbing ability exceeds 47%, and it can reach full-load slope start and stop. Fully enclosed body, supports optional air conditioning, solar panels. Specification of 17-Seater Electric Shuttle Vehicles Technical Parameters...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

17 seats, equipped with a high-power electric drive system, the climbing ability exceeds 47%, and the electric tourist car, electric tourist bus can realize start-stop on full-load slopes. Specification of 17 Seater Electric Shuttle Bus Technical Parameters Overall Dimension...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

14 seats are installed with a high-power electric drive system, and the climbing ability exceeds 46%, which can realize full-load slope start and stop. Fully enclosed body, optional air conditioning, solar panels. Specification of 14 passenger electric shuttle Technical Parameters...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

A 14 seater electric bus is a small-sized, environmentally friendly vehicle that operates on electricity. It is designed to transport a limited number of passengers and is an ideal choice for small groups or short distances. These buses are powered by electric motors and rely on...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

11 seats, equipped with a high-power electric drive system, the climbing ability exceeds 45%, and it can realize start-stop on full-load slopes.Fully enclosed body, optional air conditioning, solar panels. Specification of 11-Seater Electric Shuttle Car Technical Parameters Overall...

Mercredi 31 mai 2023

Quantité : 100000 uni - Prix : USD: USD 3,000/vehic

11 seats, with a high-power electric drive system, the climbing ability exceeds 45%, and it can achieve full-load slope start and stop. Specification of 11-Seater Electric Sightseeing Bus, Electric Sightseeing Car Technical Parameters Overall Dimension 4300*1530*2100mm Passengers...

Mercredi 31 mai 2023

Quantité : 100000 - Prix : 2~20usd

Food jar account for a certain proportion in the current global market. BPA-free PP features light-weight, handiness, and is well-fit for silicone loops, preventing it from leaking. We offer multiple capacities to satisfy the various requirements of needs. Lunch pot comes in one layer...

Mercredi 31 mai 2023

Extruded graphite block, mainly used for molten iron with casting molds and graphite crucible furnace, powder metallurgy, sintering boat and tray, melting and alloying crucible, etc. EXTRUDED GRAPHITE BLOCKS TECHNICAL INDICATORS Item Density Max Size Resistance Flexural Strength C...

Mardi 30 mai 2023

Design of grey navy plastic dining chairs: The modern ergonomic shape and comfortable curved seat make you feel relaxed and comfortable when you sit on the chair; 6 dining chairs are more suitable for gatherings and dinners; There are many colors to choose from grey plastic dining...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner mould thermocouple has two types: standard type J and type K...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Car Window Mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product quality, solving the product size issue until meeting the drawing requirements. As a custom injection mould manufacturer, we can offer sorts...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Water Inlet Manifold Mould Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Parts Mold Molded automotive parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the pipe fitting mould at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path during gas assisted pipe injection...

Mardi 30 mai 2023

Quantité : carton/woo - Prix : USD3000-200000

2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect rate. As a reliable injection molding supplier, we can also offer kinds of overmolding...

Mardi 30 mai 2023

KL-FS type gynecological table is suitable for conducting gynecological surgery, operative abortion, and gynecological examination, etc, by medical unit. Key Features of Electric Gynecological Table KL-FS.I Various actions are controlled by Imported brand motor. Hand-held controller...

Mardi 30 mai 2023

SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry type machining center is widely used in the aviation, auto, precision molding industries. It provides a high-performance mechanical system and a software interface which can be operated easily...