MOLD| - 3948 Annonces

Tuesday 09 August 2022

Quantité : 500ton - Prix : $6.5/kg

Description du produit spécification Le caoutchouc de silicone durci par addition pour la fabrication de moules, également appelé caoutchouc de silicone durci par addition et caoutchouc de silicone durci au platine, est généralement un caoutchouc de silicone liquide à deux composants...

Tuesday 09 August 2022

Sand casting china is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to dozens of tons...

Tuesday 09 August 2022

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Tuesday 09 August 2022

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the...

Tuesday 09 August 2022

The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-making, creating a mold, producing wax patterns, assembling the wax pattern, applying investment materials, burnout, pouring, decesting, finishing...

Tuesday 09 August 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Tuesday 09 August 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Tuesday 09 August 2022

Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting process is a different...

Tuesday 09 August 2022

Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as early as 6,000 years ago. This technology has been attained the prime in China during 1,700 ~ 1,000 B.C, producing the bronze ware mainly at that time...

Saturday 06 August 2022

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection...

Saturday 06 August 2022

1.SJ Single screw extruder is fetured in high production capacity and high-velocity extrusion, and low-temperature plasticization design guarantees production warranty. 2. Two stages style unitary design of single screw extruder which reinforces plasticization capacity guarantees...

Tuesday 02 August 2022

The living room is an activity space for life, work, leisure, and entertainment. Modern living room furniture sets makes people happy to discover the benefits of adapting furniture to people's lives instead of people adapting to furniture. The color of the living room storage furniture...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

PA66 GF30 Car Parts Plastic Injection Mold If you want to get the product is straight, your mold design and mold processing are also made straight, but there will be a bent product, deformed or the product size is out tolerance, they were caused by material, temperature, shrinkage...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The runner filling balance must be considered when designing the multi cavity plastic mold in order to ensure the best effect of filling balance, the multi cavity mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Multi Cavity Medical Mold USM is an ISO9001: 2015 certified plastic moulding services factory, with over 15 years of professional experience and advanced equipment, we've got many successful cases in multi cavity soft plastic mold, there are 10 engineers could assist our customers...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

USM will offer suggestions according to product requirments, quantity, material cost and so on to chose the hot runner in order to help customers to save cost. Hot runners are divided into open hot nozzles, pin-point hot nozzles, valve hot nozzles, etc. our engineer will chose the...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Metal Insert Molding Choosing suitable material and molding conditions, not only for products that are easily deformed and damaged (such as glass, coils, electrical parts, etc.), can also be sealed and fixed by material. Choosing a suitable mold structure, the insert product can also...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Medical TPE Mold Design is the source of a high-quality mold, one good mold design will be half success, USM uses the world's leading software to analyze products and make DFM reports and mold flow analysis to eliminate the appearance of defective and defective products from the source...

Tuesday 02 August 2022

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of applications...

Tuesday 02 August 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Tuesday 02 August 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Tuesday 02 August 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday 02 August 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Tuesday 02 August 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical silicone injection molding and medical grade silicone injection molding...

Tuesday 02 August 2022

Packson is not totally the same as other medical molding companies. Because we are an ISO-certified medical molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical companies like BD, Wondfo since 2008...

Tuesday 02 August 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Saturday 30 July 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck. A stack of rollers are used to shape the flat sheet into the required purlin shape. Structural C and Z section purlins are made of high...

Friday 29 July 2022

Prix : 100USD

Genvan Silicones, founded in January 2008, is committed to the research and development (R&D), production, and sales of various kinds of Heat Cure Rubber (HCR) and Liquid Silicone Rubber (LSR). Genvan silicones rubbers supplies are certified as the national high-tech enterprise...

Friday 29 July 2022

Prix : 100USD

GA-90*1A/B series platinum catalyzed silicone mold making operates easily, A: B: mix evenly according to 1: 1 ratio, product transparency is good, suitable for platinum vulcanization. The production of medical and health products needs to be treated by secondary vulcanization at 200℃ for 4 hours...